Shock Absorber Parts REAR

Hex head bolt - M12 x 1,5 x 90. 
Sold each

Fits:
Porsche 911 - 1968 (rear shock absorber bottom mount)
Porsche 964 - 1989 to 1994 (front axle subframe mounting)

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 or 50

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90008212103

The product you are viewing cross references to these numbers

Rennline Rear Monoball Strut Top Mount - Sealed. SET OF 2.

Fits:
Porsche 964*
Porsche 993*

* For cars with factory Boge shocks please call for fitment details. ** Note: RS style spring hats required.

Camber Plates/Strut Mounts - Under extreme conditions, such as road racing and autocross, negative camber is required to keep as much of the tire's contact patch on the road as possible. Stock suspension mounts will not allow you to achieve the necessary amount of negative camber required for this type of performance driving. Rennline's Sealed camber plates incorporate FK motorsports Teflon-lined spherical bearings and eliminate the indistinct feedback associated with factory rubber mounts. Why are Rennline's strut mounts the best ?

• Drastically increased bearing life due to the integrated factory GT3 weather seals.
• FK Motorsports Teflon-lined spherical bearings.
• Rigid bearing mount, not clipped in like some products available.
• Can be used with all factory and aftermarket struts, Including factory non adjustable units. Call for details.
• Fully rebuildable
• CNC machined 6061 anodized aluminum construction with stainless steel hardware.
• Available for front and rear.

• Drastically increased bearing life due to the integrated factory GT3 weather seals.

For fitting information about this product Click Here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SB6974

The product you are viewing cross references to these numbers

Shock absorber adjusting nut.
Rear



Fits:
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433351303

The product you are viewing cross references to these numbers

Shock absorber bellow. Rear.



Fits:

Porsche 964 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310600

The product you are viewing cross references to these numbers

Shock absorber bump stops and dust covers. REAR.
SET OF 4 PARTS



Fits:

Porsche 964 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6 and 8.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310600

The product you are viewing cross references to these numbers

Shock absorber mounting kit rear. 

sold as a pair



Fits:
Porsche 964 - 1989 to 1994

Upper Rear Shock Mounts

These shock absorber mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication and the included seals prevent contamination from water or grime, thus extending bearing life.

This kit is intended to work with coilover setups, however it can be adapted to work with factory or lowering springs. Please give us a call for more detail. It is also suited to work perfectly with Von Coilover systems or other similar solutions.

Fully Weather Sealed

We’ve designed in weather seals on the top and bottom to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.

Improved Shock / Coilover Performance

The spherical bearing in these Elephant Racing shock mounts pivot freely and eliminate deflection that is inherent with factory-style rubber shock mounts. This is important for the following reason:

A factory rubber mount acts as a spring in series with the shock. The factory mount’s rubber spring-action is completely un-damped and reduces a shock’s ability to control tyre contact patch. Our spherical bearing shock mounts allow the shock damper to do its job and effectively control the tire’s contact patch for predictable driving in all road/weather conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

21522

The product you are viewing cross references to these numbers

Shock absorber rubber stop (additional spring), Rear.



Fits:

Porsche 964 Carrera 1991>>
Porsche 964 Turbo 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310500

The product you are viewing cross references to these numbers

Shock absorber strut mounting, rear.




Porsche 964 1991>> (not Carrera RS)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433305900

The product you are viewing cross references to these numbers

Shock absorber strut mounting, rear.




Porsche 964 1991>> (not Carrera RS)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433305900

The product you are viewing cross references to these numbers

Shock absorber threaded sleeve.
Rear



Fits:
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433351100

The product you are viewing cross references to these numbers

Shock absorber threaded sleeve.
Rear



Fits:
Porsche 964 1989-94

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433351100

The product you are viewing cross references to these numbers

Shock Absorber Washer. REAR.

Fits:
Porsche 964 1991>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433310700

The product you are viewing cross references to these numbers

Spring top hat for Porsche 964 / 993



With certain applications using our 964/993 Adjustable Camber Plates (SR033/34) or Rear Shock Monoball Mounts (SR035/36) you may need to adapt the top of the spring (62mm ID) using our 964/993 Spring Top Hats.

Available with either a 12mm or 14mm through hole.

Sold as a set of two.