Brake Calipers
Porsche 997.2 C2 / C4 2009-12
Porsche 991.1 C2 / C4 2012>>
PLEASE NOTE: these calipers will not fit cars with PCCB Ceramic Brakes
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99735142
The product you are viewing cross references to these numbers
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
Porsche 991.1 C2 / C4 / C2S / C4S / GTS / 4GTS 2012-16 (I450)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99135242
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
- Porsche 991 Carrera C4S 3.8L (400Bhp)
Porsche 991 C2 / C4 2012-16
PLEASE NOTE: these calipers will not fit cars with PCCB Ceramic Brakes.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99135242
The product you are viewing cross references to these numbers
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
Hydra tec lubricant for maintenance work and protection Textar
Available in 75ml Tube or 5ml Sachet
The Advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.
Note:
Hydra Tec should be applied thinly and evenly.
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.
- Brake Pads & Disc Package
- Brake Disc Standard
- Brake Pads Standard
- Brembo Standard brakes
- Brembo Racing brakes
- TEXTAR Brakes
- PAGID Racing Brakes
- Zimmermann Brakes
- Performance Friction Brakes
- Giro Slotted Brake Disc
- EBC Brakes
- Surface Transforms Ceramic Brakes
- Replacement for Ceramic Disc
- Brake Pad Wear Sensors
- Brake Pad Anti-vibration shims
- Caliper Bolts / Disc Screws
- Pin Kit and Guide Plates
- Performance Brake Hoses
- Standard Brake Hoses
- Caliper and Brake Lines
- Brake Caliper Upgrades
- HandBrake Shoes
- Electric parking brake
- Brake Disc Cover Plates
- Caliper Seals |Pistons
- Brake Servo | Booster
- Brake Master Cylinder
- Brake Fluid Reservoir
- Brake Fluid
- Centre Locking Hubs