Catalyst / Bypass

Cat back Competition Race X-Pipe.



The ultimate lightweight cat-back exhaust system for the 991.2 GT3 / GT3 RS saves 54lbs (24kg) off the rear of the vehicle and is perfect for competitive track use, high performance drivers education events, or aggressive street sound.

FEATURES:

• Fits all Porsche 991.2 GT3 / GT3 RS models (2017+)
• Perfect exhaust solution for maximum performance and sound during competitive track use, high performance drivers education events, or simply achieving an aggressive and exciting street sound.
• Saves over 54lbs (24kg) from the rear of the 991.2 GT3 which improves handling and acceleration by replacing the bulky factory center muffler and side mufflers
• Engineered and manufactured with 3" (76mm) T304L stainless steel tubing with integral tuned center X-Pipe to 70mm outlets.
• Bolt-on installation' no cutting or welding required
• Options of 4" Carbon Fiber Tips or 4" Stainless Steel Brushed Tips
• Includes two (2) 90 degree Turndown Tips for track use.
• All Fabspeed performance products are backed by Fabspeed's Limited Lifetime Warranty

NOTE: This is a straight pipe, racing oriented exhaust system built to be light and make power. As a result, the volume level will be very high inside the vehicle.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9912GT3CRX

The product you are viewing cross references to these numbers

Center Muffler Bypass Pipe.



Replaces factory center muffler for improved flow, increased power, and aggressive sound; includes Deluxe Dual Tips in Polished or Matte Black finish (not pictured)

FEATURES:

• Fits all Porsche 991.2 GT3 / GT3 RS vehicles 2017+
• Saves 10 lbs from the rear of the vehicle
• Retains Sport Mode control button when used with factory side mufflers
• 14-16ga T304 Stainless Steel construction
• Includes 4" Deluxe Tips in Polished or Matte Black finish

• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9912GT3CMB

The product you are viewing cross references to these numbers

Headers with 300 Cell Race Cats



High quality T304 Stainless steel equal length primary tubes. C.N.C. mandrel bent.

Designed for maximum flow and no restriction.

Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.

Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)

Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309105

The product you are viewing cross references to these numbers

Headers with Race Cat bypass



High quality T304 Stainless steel equal length primary tubes. C.N.C. mandrel bent.

Designed for maximum flow and no restriction.

Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.

Fits:
Porsche 991.2 GT3 4.0L 500 Bhp 2017-2020 (DGG / DGGA engine)
Porsche 991.2 GT3 RS 4.0L 520 Bhp 2017 - 2020 (DGGB engine)

Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp

Please note: These race cats will make your car sound significantly louder than with stock cats. Race track and off road use only.
We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309106

The product you are viewing cross references to these numbers

Lambda Sensor Blanking Plug and Receiver Socket Set.
In case you need to relocate your existing lambda probe because it's not in the right location. Welding and cutting specialist required.


Fits:
Many Porsche vehicles. Universal kit.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

100390100392

The product you are viewing cross references to these numbers

Side Muffler Bypass Pipes.



Optimized design that replaces the heavy and restrictive factory side mufflers for improved exhaust flow, increased sound and weight savings.

Utilizing premium Helical valves along with the addition of O2 bungs, Fabspeed's Side Muffler Bypass Pipes provide the ultimate track solution for the 991.2 GT3 / GT3 RS. When accompanied with our new Long Tube Competition Headers, our Side Muffler Bypass Pipes allow the maximum amount of exhaust flow possible from the 991.2 GT3 / GT3 RS engine.

HELICAL VALVES

We chose to use Helical Valves on our 991.2 GT3 / GT3 RS track exhaust systems for their unprecedented quality - which have been proven by many OEM manufacturers such as McLaren, Ferrari, Lamborghini, and many more. Helical valves are an integral part of our Side Muffler Bypass pipes, opening and closing with precision to control the gas flow and optimizing engine back-pressure for improved performance. Helical's extensive experience in high-volume OEM automotive applications has led to standard features such as an extremely durable pneumatic actuator, precision flat sealing faces inside the valve, stiffening ribs and high-temperature bearings at both ends of the butterfly spindle.

O2 BUNGS

We relocated the O2 bungs from the collector of the headers to the Side Muffler Bypass Pipes in order to maintain factory-like functionality with our Long Tube Competition Headers - allowing them to read all cylinders while maximizing the performance of the collector. This design will replace our existing SMBP's allowing you to upgrade to our Long Tube Race Header design at any time in the future.

FEATURES:

• Fits all Porsche 991.2 GT3 / GT3 RS vehicles (2017+)
• Highest quality Helical valves
• Includes O2 bungs for factory like functionality when paired with Fabspeed Long Tube Competition Race Headers
• Saves 34 lbs from the rear of the vehicle
• Replicates aggressive CUP car sound for the street
14-16ga T304 Stainless Steel construction
• Simple bolt-on installation

• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9912GT3SMB

The product you are viewing cross references to these numbers

Sports exhaust manifold and catalytic converter kit Porsche 991 GT3 GT3 RS and R



Fits
991.1 and 991.2
Porsche 911 GT3
Porsche 911 GT3 RS
Porsche 911 R

The product can be fitted on 991 R, GT3, GT3 RS models, both 991.1 and 992.2 Not for 997

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

REDUCED CELL CATALYTIC CONVERTER - 300 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still cutting pollutant emissions and boosts power and sound

ECU REMAPPING - ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION - 80mm
This is the diameter of the main pipe of the exhaust system

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only.