Boots / Rear Lid / Locks and Latches

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-4-S

The product you are viewing cross references to these numbers

Air intake.



Fits:
Porsche 996 Turbo 2001-05

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P996.10.3000

The product you are viewing cross references to these numbers

Bonnet & Boot Opening Switch Panel - Right Hand Drive (RHD)
Fits Coupe and Cabriolet



Fits:
Porsche 986 Boxster - 2001 to 2004 (Right Hand Drive)
Porsche 996 C2 / C4 / C4S - 2001 to 2005 (Right Hand Drive)
Porsche 996 turbo - 2002 to 2005 (Right Hand Drive)

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655111904A03

The product you are viewing cross references to these numbers

Switch Panel for memory seats. Black.



RHD and LHD Cars.

Fits:
Porsche 986 Boxster 2002 onwards
Porsche 996 C2 / C4 / C4S 2002 onwards (Coupe / Cabrio)
Porsche 996 Turbo 2002 onwards (Coupe / Cabrio)

For cars with option codes
M537 - Seating position control for comfort seat, left

M538 - Seating position control for comfort seat, right

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655111905A03

The product you are viewing cross references to these numbers

Switch Panel. Black.

RHD Cars.

Fits:
Porsche 986 Boxster 2002>>
Porsche 996 C2 / C4 / C4S 2002>> (Coupe / Cabrio)
Porsche 996 Turbo / GT2 2002>>
Porsche 996 GT3 MKI 2002>>

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK-BOOTS

The product you are viewing cross references to these numbers

Guide pin for bonnet & boot opening switch panel. 

Sold each - 2 required per car



Fits:
Porsche 986 Boxster - 2001 to 2004 
Porsche 987 Boxster - 2005 to 2012
Porsche 987 Cayman - 2006 to 2012
Porsche 996 C2 / C4 / C4S - 1998 to 2005
Porsche 996 turbo - 2001 to 2005 
Porsche 996 GT3 - 1999 to 2005
Porsche 997 - 2005 to 2012
Porsche 997 turbo - 2007 to 2012
Porsche 997 GT3 - 2007 to 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99655187300

The product you are viewing cross references to these numbers

Prevent spoiler warning MicroModule Device

Fixed wing or spoiler warning issues ? MicroModule Device™ is a great solution for 996 Turbo owners that have a FIXED WING or get the dreaded Spoiler Warning. For Turbos with integrated decklid and wing like the aerokit wing or other aftermarket wings. The MicroModule Device™ is easily hooked up to the factory wiring and PREVENTS all instances of the SPOILER WARNING. Less expensive than a new GT2 or GT3 lid wiring harness. Full set of illustrated step by step instructions emailed with order.

NOTE:  Included with every Rennkit eRam Kit.

Fits:
Porsche 996 Turbo 2001-2005




Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

Micro-M

The product you are viewing cross references to these numbers

Rear Boot Lock Upper Part.


Fits:
Porsche 993 Carrera 1994-98 (Rear Lid)
Porsche 993 TURBO 1994-98 (Rear Spoiler)
Porsche 996 Carrera 1998-05
Porsche 996 TURBO 2001-05
Porsche 996 GT3 1999-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651221301

The product you are viewing cross references to these numbers

Rear engine lid reinforcement bracket.


Fits:
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651261500

The product you are viewing cross references to these numbers

Rear Lid Stop Buffer.



Fits:
Porsche 996 Turbo 2001-05
Porsche 997 2005-08 Cars with Aerokit Cup
Porsche 997 Special model '911 Sport Classic' 2009-11
Porsche 997 Turbo / GT2 2007>>
Porsche 996 GT3 1999-05
Porsche 997 GT3 / GT3 RS 2007-11
Porsche 991 GT3 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651298700

The product you are viewing cross references to these numbers

Rear Spoiler / Lid Actuator.



Fits:
Porsche 996 1999-2005
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651205500

The product you are viewing cross references to these numbers

Rear Spoiler Air Intake Duct


Fits:
Porsche 996 Turbo 2001-2005
Porsche 996 GT2 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611014171

The product you are viewing cross references to these numbers

2" eRam Kit™ electric wing system for 996 Turbo
Up/Down Speed of 5 sec.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-2-SS

The product you are viewing cross references to these numbers

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-3-S

The product you are viewing cross references to these numbers

4.75" eRam Kit™ electric wing system for 996 Turbo
Highest electric wing lift Kit™ possible - Similar height to GT3 and GT4 wings, provides the ultimate Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK6-475-S

The product you are viewing cross references to these numbers

Rear spoiler hydraulic lines.



Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651291601

The product you are viewing cross references to these numbers

Rear spoiler hydraulic ram. 



*when ordering new hydraulic rams you should also order one set of Code: 99651291600 Rear Spoiler Hydraulic Lines.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651295

The product you are viewing cross references to these numbers

Rear spoiler hydraulic ram. 



Fits:
Porsche 997 Turbo 2007-09 COUPE
Porsche 997 Turbo 2010-13 COUPE

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) or 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751295

The product you are viewing cross references to these numbers

Rubber stop for rear lid.




Porsche 968 3.0 06/91-11/95
Porsche 991 3.4-3.8 12/11-07/13
Porsche 996 3.4-3.6 09/97-08/05
Porsche 997 3.6-4.0 07/04-12/12
Porsche 981 Boxster 2.7-3.4 04/12-07/13


Porsche 911 2.7-3.3 08/73-07/89
Porsche 928 4.7-5.4 08/83-11/95
Porsche 944 Cabrio 2.5-3.0 12/88-07/91
Porsche 968 Cabrio 3.0 06/91-07/92
Porsche 996 3.4-3.6 09/97-08/05
Porsche 997 3.6-4.0 07/04-12/12

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970314040

The product you are viewing cross references to these numbers