Rear Spoilers / Aerofoil

The GT3 RS look rear spoiler complete with factory style side brackets, Triple Air Scoops . The top plane spoiler comes with deflecting straight side wing lets.

The boot lid has Triple Air Scoops fitted

Fits:
Porsche 997 MKI
Porsche 997 MKII 2009>>

Porsche 997 Turbo *will require a 997 Carrera deck lid fan 99762404601 & may also need to slightly modify the air box to stop the fan from touching it

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751220004

The product you are viewing cross references to these numbers

3" eRam Kit™ electric wing system for 997 Turbo
Closest height version for Cabriolet

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-3-S

The product you are viewing cross references to these numbers

4.8" eRam Kit™ electric wing system for 997 Turbo
Similar height to GT3 and GT4 wings, provides Superior Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-4.8-S

The product you are viewing cross references to these numbers

4" eRam Kit™ electric wing system for 997 Turbo
Creates very excellent downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-4-S

The product you are viewing cross references to these numbers

Rear spoiler harness, to be fitted when deleting the 3rd brake from the rear panel.
Cars with 3rd brake light in spoiler lid.



Fits:

• Porsche 997 Carrera 2 3.6L 2005>>
• Porsche 997 Carrera 2S 3.8L 2005>>
• Porsche 997 Carrera 4 3.6L 2005>>
• Porsche 997 Carrera 4S 3.8L 2005>>
• Porsche 997 TURBO 2007>>
• Porsche 997 MKII Carrera C2 3.6L 2009>>
• Porsche 997 MKII Carrera C4 3.6L 2009>>
• Porsche 997 MKII Carrera C2S 3.8L 2009>>
• Porsche 997 MKII Carrera C4S 3.8L 2009>>
• Porsche 997 MKII Turbo 2009>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762267070

The product you are viewing cross references to these numbers

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99950555555

The product you are viewing cross references to these numbers

Bi-Plane Rear Spoiler Type GT for improved down force and aerodynamics. made from high grade GRP
material.
Does not include fixings.

Fits:
Porsche 997 Turbo

*Please note the section for the 3rd brake light is out lined but not cut out so this spoiler are be used with or without the 3rd brake light. The 3rd brake light part number is 99763105201

If needed your body shop will need to make make the cut out. This is a fibre glass after market products and will require preparation before fitting.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751222199GRP

The product you are viewing cross references to these numbers

Blanking Panel to delete 3rd brake light for Porsche 997 Models, this is metal panel to remove the factory 3rd brake light panel just like the original Classic

Fits:
Porsche 997 MKI
Porsche 997 MKII

Classic Look Duck Tail Rear Spoiler.
Get that retro classic look like the 1973 RS for your 997 (911) Model with our classic parts.



Fits:
Porsche 997 MKI Gen1 Models Including Convertible Models

More information:
To stop the standard spoiler mechanism light on the dash working you can take the vehicle to your local Porsche centre to have the pop up spoiler function de-coded.

The brake light is NOT included with the duct tail to make it work you can harness part number 99762267070 or modify the existing harness if you already have a 3rd brake light in your spoiler or order part number 99763105201. The rubber buffers need to be changed to 99651298700 x2.

You do not need to change the bumpers and lights if you just want the duct tail spoiler by it self

This spoiler should be fitted like any other fibre glass material product professional prepared, pre-fitted before painting and then let it dry naturally. Not recommend to bake fibre glass products

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P9971DCTL

The product you are viewing cross references to these numbers

Cover between spoiler and rear window for Porsche 911/997

• Cover for Porsche 911/997 Coupé from 2004-2012
• suitable for the model / body variant (s) Coupé
• suitable in combination with rear wing HF496 and HF488
• closes the gap between the spoiler and the rear window

• Front spoiler lip is made of the innovative and high-quality material Fiberflex. The advantages of this new type of composite material: extremely high flexibility combined with great stability, splinter resistance and non-flammability. A very high production quality and low weight even allow use in professional racing. The characteristic black surface is characterised by good processing options and guarantees professional results. Thanks to its excellent cutting and adhesive properties, Fiberflex products from are ideally suited for repair and other remodeling work.

• Uniform surface structure enables painting without much preparatory work (product is unpainted)

• Cover can be used instead of Porsche Original ET No. 997504345A1GRV (It is not a Porsche original part!)

• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Ducktail spoiler, included wiring harness (P997.20.3021).
With TÜV parts certificate (§19.3) Also recognized in Switzerland.



Fits:
Porsche 997.1 Carrera models
Porsche 997.2 Carrera models

The 997 Ducktail ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

This ducktail spoiler is delivered primed & paint ready. Mounting material is included.

For Installation instructions please CLICK HERE

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P997.20.3020

The product you are viewing cross references to these numbers

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK-BOOTS

The product you are viewing cross references to these numbers

Rear diffuser, Carbon.



Fits:
Porsche 997.1 Carrera S

Special order:  Please note it usually takes 8 weeks for us to receive this from supplier as this is special order part.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

1CCPS05B04

The product you are viewing cross references to these numbers

Rear spoiler for Porsche 997 CARRERA built from 2006 for variant Coupe.

*does not fit cabrio

• The angle adjustable rear wing paintable fiberglass (Fibre glass not carbon).
• Engine covers, cover incl RAM AIR system for better supply of fresh air - noticeably more power and higher top speed
• Improved aerodynamic properties and freely selectable pressure
• Wing has six parts

• Rear spoiler is manufactured from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• The spoiler will require minor alteration and modifications to ensure the perfect fit.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HF911B

The product you are viewing cross references to these numbers

Rear spoiler for Porsche 911 (997) , built from 2006 for variant Coupe.

• The angle adjustable rear wing paintable fiberglass (Fibre glass not carbon).
• Engine covers, cover incl RAM AIR system for better supply of fresh air - noticeably more power and higher top speed
• Improved aerodynamic properties and freely selectable pressure
• Wing has six parts

• Rear spoiler is manufactured from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear spoiler / Rear wing for Porsche 911 (997) 2004-2012. Suitable for all models
two-piece

• There is currently no TÜV certificate,
• Mounting accessories, if required
• assembly Instructions
• Rear spoiler is made of the innovative and high-quality material
• Uniform surface structure allows painting without much preparatory work (Product is not painted)

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear spoiler / Rear wing for Porsche 911 (997) 2004-2012.
NOT suitable for Turbo, GT2, GT3.

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• assembly Instructions
• Rear spoiler is made of the innovative and high-quality material
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

2" eRam Kit™ electric wing system for 997 Turbo
Up/Down Speed of 5 sec
NOT RECOMMENDED FOR CABRIO

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EK7-2-SS

The product you are viewing cross references to these numbers

Rear spoiler electric rams pump Porsche 997TT



Fits:
Porsche 997 Turbo



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751294300

The product you are viewing cross references to these numbers

The GT3 RS look rear spoiler complete with factory style side brackets, One Piece Twin Air Scoops . The top plane spoiler comes with deflecting straight side wing lets.

The boot lid has One Piece Twin Air Scoops fitted

Fits:
Porsche 997 MKI
Porsche 997 MKII 2009>>

Porsche 997 Turbo *will require a 997 Carrera deck lid fan 99762404601 & may also need to slightly modify the air box to stop the fan from touching it

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751220003

The product you are viewing cross references to these numbers

The GT3 RS look rear spoiler complete with factory style side brackets. Two Separate Air Scoops. The top plane spoiler comes with deflecting straight side wing lets.

The boot lid has Two Separate Air Scoops fitted

Fits:
Porsche 997 MKI
Porsche 997 MKII 2009>>

Porsche 997 Turbo *will require a 997 Carrera deck lid fan 99762404601 & may also need to slightly modify the air box to stop the fan from touching it

Material:
Made from Fibre Glass GRP

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751220002

The product you are viewing cross references to these numbers

Rear spoiler GT3 style. 
The rear spoiler is made from fiberglass (lightweight parts)



Fits:
Porsche 997.1 Carrera / Carrera 4 - 2005 to 2008
Porsche 997.1 GT3 - 2007 to 208

Rear spoiler 997 GT3 - MK1 with adjustable wing. 

Including thread inserts for hinges and bonnet lock.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK180

The product you are viewing cross references to these numbers

Rear spoiler harness, to be fitted when changing the active rear spoiler to a static rear spoiler.
Cars without 3rd brake light in the rear lid. (brake light located in upper panel)



Fits:
Porsche 997.1 2005-2008 with Aerokit spoiler option XAA
Porsche 997.2 2009-12 with Aerokit spoiler option XAA

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99761267071

The product you are viewing cross references to these numbers

Rear Spoiler Rubber Wall.
please note you may also require new clips order 2 x part number 99959171240

Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera MKI 2005-08
Porsche 997 Carrera MKII 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 5.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99651225000

The product you are viewing cross references to these numbers

Rear spoiler wiring harness with micro switch.



Fits:
Porsche 997.1 Turbo 2007-10 Coupe
Porsche 997.2 Turbo 2011-13 Coupe

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762267001

The product you are viewing cross references to these numbers

Replica GT3 rear spoiler. Complete rear lid spoiler with adjustable middle section for more down force.

Fits:
Porsche Standard 997 Gen1
Porsche Standard 997 Gen2


Material:
Made from Fibre Glass GRP

Product Type:
Replica

Special order product that cannot be cancelled!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99751222592GRP

The product you are viewing cross references to these numbers

Bi-plane rear spoiler with carbon uprights and 3rd brake light.

Fits:
Porsche Standard 997 and S models

Material:
Made from Fibre Glass GRP and Carbon

Product Type:
SpeedArt

Rear spoiler with air intakes (RAM-Air), BTR- wing
For an improved aerodynamic and more downforce.

Fits:
Porsche 997 Turbo

Material:
Made from Fibre Glass GRP

Product Type:
SpeedArt

This rear spoiler is produced to fit on the original engine hood/lid and the original grill is also used in the middle.

fits:
Porsche Standard 997 and S models

Material:
Made from Fibre Glass GRP and Carbon

Product Type:
SpeedArt

Rear Spoiler SRS with additional air inlets. The rear spoiler will be fitted on the original engine hood/lid and the original grill will be included.

Fits:
Porsche Standard 997 and S models

Material:
Made from Fibre Glass GRP

Product Type:
SpeedArt

Designed for the 2008 and on Porsche 997 Turbo, the BTR-XL rearwing replaces the stock engine cover using all factory mount points and requires no drilling.

This model includes the speedART wingblade made from 100% carbon fiber. Porsche wingblade removal tool required (not included).


Fits:
Porsche 997 Turbo 2007>>

Material:
Made from Fibre Glass GRP
Carbon

Product Type:
SpeedArt

The BTR rear spoiler by speedART for the 997 Turbo has been designed by speedART and is the first piece they had manufactured using AutoCAD to ensure excellent fitment. The wing blade replaces the factory unit* simply and elegantly for added downforce. The piece carries TUV certification important to cars being operated at high speeds Germany.

*A special Porche tool is required to remove the OEM wingblade. Formerly known as the RS style.

Fits:
Porsche 997 Turbo

Material:
Carbon Fibre

Product Type:
SpeedArt

The BTR rear spoiler by speedART for the 997 Turbo has been designed by speedART and is the first piece they had manufactured using AutoCAD to ensure excellent fitment. The wing blade replaces the factory unit* simply and elegantly for added downfoce. The piece carries TUV certification important to cars being operated at high speeds Germany.

*A special Porche tool is required to remove the OEM wingblade. Formerly known as the RS style.


Fits:
Porsche 997 Turbo 2007>>

Material:
Made from Fibre Glass GRP

Product Type:
SpeedArt

Rear wing spoiler.
With TÜV parts certificate (§19.3), Also recognized in Switzerland.



Fits:
Porsche 997.1 Turbo models
Porsche 997.2 Turbo models

The 997 Turbo rear wing spoiler ensures the best possible aerodynamic properties and is at the same time a beautiful oem+ design element that gives your Porsche a unique appearance.

DOWNFORCE +
The rear wing spoiler ensures the highest possible downforce that the original rear spoiler can produce
The original height adjustment and lowering of course remain technically completely unchanged and still active.
The wing delivers 60kg extra of downforce at 200 km/h.

This rear wing spoiler is delivered primed & paint ready. Mounting material is included.

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P997.10.3020

The product you are viewing cross references to these numbers