Manifold / Headers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers

Exhaust Manifold to Catalytic Converter Bolt.
M8 x 30. EACH



Fits:
Porsche 997 MKI C2 / C4 / C2S / C4S
Porsche 997 MKII C2 / C4 / C2S / C4S
Porsche 991 MKI C2 / C4 / C2S / C4S

Porsche 987 Boxster MKI
Porsche 987 Boxster MKII
Porsche 981 Boxster MKI

Porsche 987C Cayman MKI
Porsche 987C Cayman MKII
Porsche 981C Cayman MKII

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N01024426

The product you are viewing cross references to these numbers

Exhaust manifold with cat bypass. These headers are offroad use only.



Fits:
Porsche 997.2 Carrera 2009-12

Made out of 304 grade stainless steel and would provide gains of 15 BHP. Remapping of the car after fitment is highly recomended.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

Please note: sports catalytic converters or bypass pipes do have type approval and may not be legally installed on vehicles manufactured after 1^st March 2001. They can not be used on a public road and are not MOT compliant, they are designed for race and track cars only. 


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109978

The product you are viewing cross references to these numbers

Exhaust Sport Headers.



Performance headers improve exhaust flow and sports car sound; Sport Headers include 200-cell HJS Sport Catalytic Converters.

SOUND:

These headers will give you a significant volume increase and give your 911 a stronger flat 6 wail.

POWER:

Headers are often the most effective way to improve power on your naturally aspirated car and these sport headers are no exception. On our dynojet we saw gains of 8 whp and 14 ft/lbs of tq at 3000 RPM, 13 whp and 16 ft/lbs of tq at 4400RPM, and holds those gains all the way to redline.

FEATURES:

• Fits all Porsche 997.2 Carrera vehicles 2009-2011

• Improves power by 13 whp and 16 ft-lbs. of torque at 4500rpm

• Saves 4 lbs from the rear of the vehicle

• Includes multi-layer exhaust manifold gasket

• Includes German-imported 200-cell HJS Sport Catalytic Converters for maximum performance

• Investment-cast high-velocity 3-into-1 merge collectors for maximum performance

• Constructed from high-quality 14-16 gauge C.N.C. mandrel-bent T304L stainless steel for optimum flow and maximum durability

• Direct bolt-on replacement for the restrictive OEM headers

• Backed by the Fabspeed Lifetime Warranty

INSTALLATION NOTE: To ensure proper header seal, after initial heat cycle, tighten all exhaust bolts to the OEM torque specs.

DISCLAIMER: This product removes the OEM catalytic converters from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Sport Catalytic Converter solely intended for track and race cars as it is NOT California Air Resources Board Certified and not EPA certified. You are hereby informed and warned to check your local, state, and federals laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR9972SHDR

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-18

The product you are viewing cross references to these numbers

Screw plug for lambda hole, M18x1.5 mm.



Fits:
Porsche 924S 2.5L 1987-88 (Engine M44.09/M44.10)
Porsche 944 2.5L 1987-90 (Engine M44.09/M44.10)
Porsche 944 Turbo 2.5L 1985-91
Porsche 944S 2.5L 1986-88 (Engine M44.40)
Porsche 944 2.7L 1988-89
Porsche 944 3.0L 1988-91
Porsche 996 GT3 3.6L 1999-05
Porsche 968 3.0L 1991-95
Porsche 986 Boxster 2.5L 1996-99 (Engine M96.20)
Porsche 986 Boxster S 2.7L-3.2L 1999-04
Porsche 993 3.6L-3.8L 1993-97
Porsche 997 3.6L 2004-08 (Engine M95.05)
Porsche 997 3.8L 2004-08 (Engine M97.01)

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90021901500

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-18

The product you are viewing cross references to these numbers