Caliper Bolts / Disc Screws
2x Bolts required per Caliper, Fits front & Rear Calipers.
Geniune Porsche product.
Fits:
Porsche 996 C4S 2002>> (FRONT & REAR)
Porsche 996 TURBO (FRONT & REAR)
Porsche 997 MKI C2S / C4S 3.8L 2005-08 (FRONT & REAR)
Porsche 997 MKII C2S / C4S 3.8L 2009>> (FRONT & REAR)
Porsche 981 Boxster 2.7L 2012>> (FRONT)
Porsche 981C Cayman 2.7L 2013>> (FRONT)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99906705009
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche Cayman 2.7L 981 2013-16
For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
Hydra tec lubricant for maintenance work and protection Textar
Available in 75ml Tube or 5ml Sachet
The Advantages of Hydra Tec:
- Facilitates the installation of hydraulic brake components
- Tested compatibility with commercially available braking fluids (DOT3, DOT4, DOT4LV, DOT5.1)
- Free of mineral oils and compatible with EPDM rubber
- In addition, running surfaces are protected against corrosion
Hydra Tec is suitable for lubricating:
- Cylinder running surfaces
- Pistons
- Sealing elements
Application:
Apply a thin layer of Hydra Tec on the marked sections.
Note:
Hydra Tec should be applied thinly and evenly.
Never use mineral oils or greases as substitutes.
Do not apply the product on friction surfaces of brake pads or brake discs.
- Brake Pads & Disc Package
- SPORTS Brake Pads & Disc Package
- Brake Disc Standard
- Brake Pads Standard
- SPORTS Brake Disc
- Brembo Standard brakes
- Brembo Racing brakes
- TEXTAR Brakes
- PAGID Racing Brakes
- Zimmermann Brakes
- Performance Friction Brakes
- Giro Slotted Brake Disc
- EBC Brakes
- Surface Transforms Ceramic Brakes
- Rotinger Graphite Line
- Replacement for Ceramic Disc
- Brake Pad Wear Sensors
- Brake Pad Anti-vibration shims
- Pin Kit and Guide Plates
- Performance Brake Hoses
- Standard Brake Hoses
- Caliper and Brake Lines
- Brake Calipers
- Brake Caliper Upgrades
- HandBrake Shoes
- HandBrake Cables
- Brake Disc Cover Plates
- ABS | Speed Sensors
- Caliper Seals |Pistons
- Brake Servo | Booster
- Brake Master Cylinder
- Brake Fluid Reservoir
- Brake Fluid
- Centre Locking Hubs
- Titanium Brake Pad Shields
- Build Your Own Brake Kit