Lathes
• Suitable for SM3002 & SM2503.
• Model No. SM30024JC• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• 4 Jaw Independent Chuck for SM3002 & SM25034 Jaw Independent Chuck
• Model No. SM27FJC• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• 4 Jaw Independent Chuck with Back Plate for SM274 Jaw Independent Chuck with Back Plate
* Not suitable for SM1308 or SM1100• Model No. SM42/ACC2• One of range of quality accessories for the SM1307, SM1308, SM900 and SM1100 wood lathes.
• Will fit other brands of wood turning lathe.
• Cup Chuck for SM1307, SM1308, SM900 and SM1100.Cup Chuck
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.
• Model No. SM3002CS2• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Cutter Set 2pc for SM30022pc Cutter Set
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.
• Model No. SM3002CS11• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• HSS Steel lathe tools suitable for machining mild steel, brass, copper and plastics.
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.11pc Cutter Set 8 x 8mm
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.
• Model No. SM3002CS5• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• HSS Steel lathe tools suitable for machining mild steel, brass, copper and plastics.
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.5pc Cutter Set 8 x 8mm
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.
• Model No. SM3002CS6• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• HSS Steel lathe tools suitable for machining mild steel, brass, copper and plastics.
• 8x8mm Section fits Sealey and other popular makes.
• Manufactured to standard DIN profiles.6pc Cutter Set 8 x 8mm
Digital display for the cross slide and the compound tool rest to replace the standard graduated scales. These LCD units improve accuracy, save reading time and minimize errors. Imperial or Metric readings may be selected and the reading can be zeroed at any point. Three decimal place (Metric) and four decimal place (Imperial) displays with an accuracies of ± 0.025mm/0.001".
Supplied with LR44 cells.• Digital display for cross slide and compound tool rest.
• Improved accuracy, reduced reading time and fewer errors.
• Imperial or Metric readings which may be zeroed at any point.
• Accuracies of ± 0.025mm/0.001".
• Supplied with LR44 cells.
• Model No. SM3002DFD• Digital display for the cross slide and the compound tool rest to replace the standard graduated scales.
• These LCD units improve accuracy, save reading time and minimize errors.
• Imperial or Metric readings may be selected and the reading can be zeroed at any point.
• Three decimal place (Metric) and four decimal place (Imperial) displays with an accuracies of ± 0.025mm/0.001".
• Supplied with LR44 cells.Digital Feed Display for SM3002
• Model No. SM27FP• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• Face Plate Ø160mm for SM27Face Plate Ø160mm
• Model No. SM27FS• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• Fixed Steady for SM27Fixed Steady
• Includes suds tray with drain.
(Lathe not included)
• Model No. SM27ST• Suitable for Model No. SM27 metal turning lathe and other similar lathes.
• Includes suds tray with drain.
(Lathe not included)Floor Stand for SM27
• Model No. SM3002FR• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Follow Rest for SM3002Follow Rest
* Not suitable for SM1308 or SM1100• Model No. SM42/ACC5• One of range of quality accessories for the SM1307, SM1308, SM900 and SM1100 wood lathes.
• Will fit other brands of wood turning lathe.
• Independent Chuck for SM1307, SM1308, SM900 and SM1100.Independent Chuck
* Not suitable for SM1308 or SM1100• Model No. SM42/ACC1• One of range of quality accessories for the SM1307 and SM900 wood lathes.
• Will fit other brands of wood turning lathe.
• Key Chuck for SM1307 and SM900.13mm Key Chuck MT1
• Model No. SM3002KTH• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Knurling Tool for SM3002Knurling Tool
• Model No. SM3002LD• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Lathe Dog for SM3002Lathe Dog
• Precision built metal working lathe, ideal for the small workshop, professional or home engineer and model maker.
• Powered by a 300W motor this compact unit features variable speed reversible drive and powered cutting facility for right and left hand threads.
• Supplied with self centring 3 jaw chuck, 4-way tool post, swarf tray and rear splash guard.
• Complies with Machinery Directive 98/37/EEC is fully CE approved and supplied with emergency stop button and chuck guard.
• Optional stand is available, order Model No. SM3002ST.
• Model No. SM3002• Precision built metal working lathe, ideal for the small workshop, professional or home engineer and model maker.
• Powered by a 300W motor this compact unit features variable speed reversible drive and powered cutting facility for right and left hand threads.
• Supplied with self centring three jaw chuck, four-way tool post, swarf tray and rear splash guard.
• Complies with Safety of Machinery (Safety) Regulations 1992 (and amendments), is fully CE approved and supplied with emergency stop button and chuck guard.
• An optional stand is available, order Model No. SM3002ST.Metal Working Lathe 300mm Between Centres
• Features power feed for even surface finish and thread cutting.
• Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed.
• Powered by 550W motor through six-speed gearbox.
• Incorporates quiet running PTO gearbox with oil bath lubrication for power feed.
• Supplied with three-jaw chuck and dead centre.
• Fitted with no-load voltage release switch.
• Fully guarded to CE safety of machinery regulations 98/37/EEC and covered by EMC directive 89/336/EEC and Low Voltage directive 79/23/EEC.
• Workshop stand available as an optional extra.
• Model No. SM27• Quality workshop lathe suitable for a wide range of turning and drilling applications.
• Features power feed for even surface finish and thread cutting.
• Four-way tool post mounted on compound slide mechanism enables fast interchange of cutting tools with accurate feed.
• Powered by 550W motor through six-speed gearbox.
• Incorporates quiet running PTO gearbox with oil bath lubrication for power feed.
• Supplied with three-jaw chuck and dead centre.
• Fitted with no-load voltage release switch.
• Meets Supply of Machinery (Safety) Regulations 1992 (and amendments).
• Workshop stand available as an optional extra - Model No. SM27ST.Metal Working Lathe 500mm Between Centres
• Model No. SM3002MA• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Mill Attachment for SM3002Mill Attachment
• Maximum Turning Capacity: 330 x 200mm.
• Variable speed enables lathe to be used for a variety of jobs.
• NVR switch prevents re-start after the mains power has been interrupted.
• Powered by smooth operating 250W motor.
• Fitted with a BS approved, non-rewirable 3 pin plug and cable.
• Ideal for bench mounting.
• Supplied with face plate, head and tailstock and 2 tool rests.
• Model No. SM1307• Manufactured to comply with latest CE requirements.
• Powered by 250W motor with no-volt load release switch which prevents re-start after the mains power has been interrupted.
• Cast iron construction throughout with one-piece bed.
• Variable speed enables lathe to be used for a variety of jobs.
• Fitted with a BS approved, non-rewirable 3-pin plug and cable.
• Ideal for bench mounting.Variable Speed Mini Wood Lathe 330mm Centres
• Model No. SM27MS• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• Moving Steady for SM27Moving Steady
• Model No. SM3002QCCR• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Quick Change Post for SM3002Quick Change Post
• Model No. SM3002RC• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Revolving Centre MT2 for SM3002Revolving Centre MT2
• Model No. SM27RDC• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• Revolving Centre for SM27Revolving Centre
* Not suitable for SM1308 or SM1100• Model No. SM42/ACC6• One of range of quality accessories for the SM1307, SM1308, SM900 and SM1100 wood lathes.
• Will fit other brands of wood turning lathe.
• Face Plate RH (150mm) for SM1307, SM1308, SM900 and SM1100.Right Hand Face Plate 150mm
* Not suitable for SM1308 or SM1100• Model No. SM42/ACC3• One of range of quality accessories for the SM1307, SM1308, SM900 and SM1100 wood lathes.
• Will fit other brands of wood turning lathe.
• Screw Chuck for SM1307, SM1308, SM900 and SM1100.Screw Chuck
Floor stand with sliding tool shelf suitable for SM2502, SM2503 and SM3002.• One of a comprehensive range of high quality accessories for SM3002, SM2502 and SM2503 metal working lathes.
• Model No. SM3002ST• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Stand for SM3002, SM2502, SM2503Stand for SM3002, SM2502, SM2503
• Model No. SM3002SR• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Steady Rest for SM3002Steady Rest
• Model No. SM3002TC• One of a comprehensive range of high quality accessories for SM3002 metal working lathe.
• Tailstock Chuck MT2 for SM3002Tailstock Chuck MT2 13mm
• Model No. SM27TNS• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• 12pc T-Nut Bolt Set for SM2712pc T-Nut Bolt Set
• Model No. AK1122• One of a comprehensive range of high quality accessories for SM27 metal working lathe.
• 6pc Turning Set6pc Turning Set 10x10mm
• Maximum Turning Capacity: 1000 x 350mm.
• Four turning speed options to suit a variety of jobs.
• NVR Switch prevents re-start after the mains power has been interrupted.
• Powered by smooth operating 370W motor.
• Lathe bed with twin bar construction.
• Solid head and tail stocks.
• Fitted with a BS approved, non-rewirable 3 pin plug and cable.
• Model No. SM1308• Manufactured to comply with latest CE requirements, this economy lathe is ideal for the first time user.
• Powered by 370W motor with no-volt load release switch which prevents re-start after the mains power has been interrupted.
• Solid head and tail stocks. Lathe bed with twin bar construction.
• Four turning speed options to suit a variety of jobs.
• Fitted with a BS approved, non-rewirable 3-pin plug and cable.4-Speed Wood Lathe 1000mm Centres
• Plate clutch allows seamless speed control without the need to stop the motor and adjust belts and pulleys.
• Hollow centred head and tail stocks allow hole boring.
• One-piece machined lathe bed with head stock extension for bowl turning and sanding operations.
• Head stock rotates through five preset positions for outboard bowl turning.
• Includes floor stand.
• Model No. SM1100• Manufactured to comply with CE requirements.
• Powered by smooth operating 550W induction motor.
• Plate clutch allows seamless speed control without the need to stop the motor and adjust belts and pulleys.
• Hollow centred head and tail stocks allow hole boring.
• One-piece machined lathe bed with head stock extension for bowl turning and sanding operations.
• Head stock rotates through five preset positions for outboard bowl turning.
• Includes floor stand and BS approved 3-pin plug.10-Speed Wood Lathe 1100mm Centres
• Plate clutch allows seamless speed changes without the need to stop the motor and adjust belts and pulleys.
• Hollow centred head and tail stocks allow hole boring.
• One-piece machined lathe bed with head stock extension for bowl turning and sanding operations.
• Head stock rotates through five preset positions for outboard bowl turning.
• Includes floor stand.
• Model No. SM900• Manufactured to comply with CE requirements.
• Powered by smooth operating 450W induction motor.
• Plate clutch allows seamless speed changes without the need to stop the motor and adjust belts and pulleys.
• Hollow centred head and tail stocks allow hole boring.
• One-piece machined lathe bed with head stock extension for bowl turning and sanding operations.
• Head stock rotates through five preset positions for outboard bowl turning.
• Includes floor stand and BS approved 3-pin plug.10-Speed Wood Lathe
900mm Centres
- Bench Grinders
- Chisel Mortiser
- Clamping
- Cutting Oils
- Drill Bits & Sets
- Dust Extraction
- Extractors
- Files
- Hacksaws
- Hand Tools
- Lathe/Drilling
- Letter & Number Punches
- Log Splitters
- Measuring
- Milling/Drilling
- Miscellaneous
- Pillar Drills
- Planer & Thicknessers
- Power Saws
- Punches & Chisels
- Roller Stands
- Sanders
- Sheet Metal Tools
- Thread Cutting
- Trestles
- Vices
- Wire Brushes
- Workbenches