Air Induction Kits
This Product Fits:
Porsche 970 Panamera 4.8L S / GTS
Porsche 970 Panamera 4.8L TURBO
Porsche 970 Panamera 3.6L
Porsche 970 Panamera 3.0L HYBRID
Panel Filter Size:
- width - 693mm
- height - 122mm
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.
DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FB582
The product you are viewing cross references to these numbers
- Porsche Panamera S V8 4.8L
- Porsche Panamera 4S V8 4.8L
- Porsche Panamera GTS V8 4.8L
- Porsche Panamera Turbo V8 4.8L
This high performance cold air intake system replaces the restrictive factory intake for increased power and throttle response.
FEATURES:
• Fits all Porsche 970 Panamera 3.6L V6 models (2010-2016) (Does Not fit 3.0L V6 Twin Turbo Models)
• Constructed from mandrel bent light weight aluminum tubing
• High performance dual-conical air filters included
• Uses dry-style filters that do not require oiling; simply wash down with warm water and re-use
• Improves power across the RPM range
• Noticeable increase in throttle response and acceleration
• Simple DIY (Do-It-Yourself) bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty
DISCLAIMER: This product removes the OEM intake filter system from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Air Filter solely intended for track and race cars as it is NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
FSPOR970V6COMPAI
The product you are viewing cross references to these numbers
- Porsche Panamera V6 3.6L 2WD
- Porsche Panamera 4 V6 3.6L 4WD
- Porsche Panamera V6 3.6L 2WD (310Hp)
- Porsche Panamera 4 V6 3.6L 4WD (310Hp)
Can be adapted to various vehicles.
Filter height: 6 inch / 15cm
Filter diameter at base: 7 inch / 18cm
Funnel height: 8 inch / 20cm
Filter diameter at base: 3,5 inch / 9cm
Overall height: 13inch / 33cm
- Engine Modifications & Upgrades
- ECU Re-Mapping DIY
- Electronic Throttle Booster
- Hi Flow Air Filters
- Performance Plenum
- ECU Reader / Fault Finder
- Fuel Additives
- Pedals / Floor Boards / Track Mats LHD Cars
- Pedals / Floor Boards / Track Mats RHD Cars
- Fire Extinguisher Mounts
- Brey-Krause Fire Extinguisher Mount
- Tow Eye Hooks & Tie Downs
- Brake Hoses Stainless Steel Goodridge