Sport Silencers / Mufflers
Refine by Car Type
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
Filter by brand
Akrapovic Evolution header set (Titanium). Porsche 991.2 GT3 RS / Speedster 2019>> with OPF/GPF filter
Code: E-PO/T/6/1
Akrapovic Evolution header set (Titanium)
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
E-PO
9GT254400B
9GT254400E
9GT254450B
9GT254450E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£8,405.00
Now £8,236.90
Orderable 
Akrapovic Slip-On Line (Titanium). Porsche 991.2 GT3 RS
Code: S-PO/TI/10H
Slip-On Line (Titanium)
Fits:
Porsche 911 (991.2) GT3 RS
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovič sound, while still meeting ECE specifications.
The mandatory tail pipe set TP-T/S/19/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17/H or TP-T/S/17.
The Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (991.2) GT3 RS
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovič sound, while still meeting ECE specifications.
The mandatory tail pipe set TP-T/S/19/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17/H or TP-T/S/17.
The Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
99111102790
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£4,167.00
Now £4,083.66
Orderable
Akrapovic Slip-On Line Titanium Exhaust for Porsche 991 (911) GT3 / RS 2014>>
Code: MTP-PO997GT3H/1
Akrapovic Slip-On Line Titanium Exhaust
Fits:
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MTP-PO997GT3H
The product you are viewing cross references to these numbers
Fits:
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
MTP-PO997GT3H
99711102792
99711102799
99111102790
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£4,081.00
Now £3,999.38
In stock
Akrapovic Slip-On Line Titanium Exhaust System for Porsche 991.2 Turbo / Turbo S 2017>>
Code: S-PO/TI/6H
The Akrapovič Slip-On Line for the Porsche 911 Turbo / Turbo S (991.2) is the first stage in the exhaust tuning process and gives this already outstanding car a further step in performance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (991.2) Turbo / Turbo S 2017>>
Complete the slip-on system with titanium tailpipes in combination with carbon fiber diffuser in matte or high gloss finish (sold separately, part no
High Gloss DI-PO/CA/4/G or Matte DI-PO/CA/4/M).
Fitment notice: The system is designed to replace the Porsche sport exhaust system.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
99111173171
99111173140
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£4,494.00
Now £4,404.12
Orderable
Akrapovic Slip-On race line (Titanium). Porsche 911 (991.2) GT3 RS OPF model
Code: S-PO/TI/15
Slip-On race line (Titanium).
Fits:
Porsche 911 (991.2) GT3 RS OPF model
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Slip-on system (S-PO/TI/15) for GT3 RS OPF model must be mandatory combined with:
- Evolution Header Set (E-PO/T/6)
- Tail pipe set TP-T/S/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17.
- An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
This Slip-On system (S-PO/TI/15) must be upgraded into a full Akrapovič Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO/T/6) with side mufflers and valves, which is designed to unleash the system's full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovič's own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 (991.2) GT3 RS OPF model
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Slip-on system (S-PO/TI/15) for GT3 RS OPF model must be mandatory combined with:
- Evolution Header Set (E-PO/T/6)
- Tail pipe set TP-T/S/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17.
- An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
This Slip-On system (S-PO/TI/15) must be upgraded into a full Akrapovič Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO/T/6) with side mufflers and valves, which is designed to unleash the system's full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovič's own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
99111102790
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£4,167.00
Now £4,083.66
Orderable
Akrapovic Slip-On race line (Titanium). Porsche 991.2 GT3 2018
Code: S-PO/TI/8
Slip-On race line (Titanium)
Fits:
Porsche 911 GT3 (991.2) 2018
Hard facts:
power: +6.5 kW at 4400 rpm
torque: +15.2 Nm at 4400 rpm
weight: -4.7 kg
Akrapovič's Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovič sound.
Please note: The mandatory tail pipe set TP-T/S/17 needs to be ordered separately.
The Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.
The look of this system can be further enhanced with the addition of the superbly handcrafted high-quality optional carbon- fibre rear diffuser in matte and high gloss finish to give even more exclusivity to the Porsche 911 GT3 RS (991.2).
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
The product you are viewing cross references to these numbers
Fits:
Porsche 911 GT3 (991.2) 2018
Hard facts:
power: +6.5 kW at 4400 rpm
torque: +15.2 Nm at 4400 rpm
weight: -4.7 kg
Akrapovič's Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovič sound.
Please note: The mandatory tail pipe set TP-T/S/17 needs to be ordered separately.
The Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.
The look of this system can be further enhanced with the addition of the superbly handcrafted high-quality optional carbon- fibre rear diffuser in matte and high gloss finish to give even more exclusivity to the Porsche 911 GT3 RS (991.2).
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
S-PO
99711102792
99711102790
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£2,236.00
Now £2,191.28
Orderable
DesignTek Titanium sports exhaust system for Porsche 991.1 / 991.2 Turbo
Code: 3601173170
A Voucher for £100 available when you buy this product. For more information CLICK HERE
DesignTek Titanium sports exhaust system.
Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601173170
The product you are viewing cross references to these numbers
DesignTek Titanium sports exhaust system.
Fits:
Porsche 991.1 Turbo
Porsche 991.2 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601173170
99111173170
99111173171
99111173140
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£1,550.00
Now £1,519.00
Delayed delivery
Exhaust final muffler with black chrome tailpipes Porsche 991 GT3 - DesignTek
Code: 3606609136
Exhaust final muffler with black chrome tailpipes
High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609136
The product you are viewing cross references to these numbers
High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609136
99711102799
99711102790
99711102792
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£695.00
Now £681.10
Delayed delivery
Sports exhaust rear silencer Porsche 911 turbo and 911 turbo S
Code: TSPO991T13.001.A
Sports exhaust rear silencer Porsche 911 turbo and 911 turbo S (991.1 and 991.2) 2013-2019
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T13.001.A
The product you are viewing cross references to these numbers
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
ECU REMAPPING
ENGINE LIGHT
Replacement or removal of components such as catalytic converters, GPFs and electric actuators may cause the engine warning light to come on. In this case, the installer must reprogram the software to eliminate the light
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
CATALYTIC CONVERTER REMOVAL
Complete removal of the catalytic converter minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T13.001.A
99111102790
99111173170
99111173140
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£3,123.08
Now £3,060.62
Orderable
Sports exhaust rear silencer Porsche 911 turbo and 911 turbo S
Code: TSPO991T13.004.AK
Sports exhaust rear silencer Porsche 911 turbo and 911 turbo S with catalytic converters (991.1 and 991.2) 2013-2019
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T13.004.AK
The product you are viewing cross references to these numbers
Fits
Porsche 911 turbo 991.1
Porsche 911 turbo S 991.1
Porsche 911 turbo 991.2
Porsche 911 turbo S 991.2
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
This kit includes the central silencer without bypass valves and replaces the catalytic converters and the rear silencer. The kit is compatible with all 991.1 and 991.2 turbo and turbo S models
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
MATERIAL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter of the main pipe of the exhaust system
NO EXHAUST BYPASS VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the driver via the specific control systems is no longer possible
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991T13.004.AK
99111102790
99111173170
99111173140
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£4,630.77
Now £4,538.15
Orderable
Sports exhaust rear silencer Porsche 991 turbo and turbo S
Code: TSPOCSIT13.800.A
Sports exhaust rear silencer Porsche 991 turbo and turbo S 2013-2019
Fits
991.1 and 991.2
Porsche 991 turbo
Porsche 991 turbo S
The muffler can be fitted on all 911 Turbo and Turbo S versions, both 991.1 and 991.2
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Fits
991.1 and 991.2
Porsche 991 turbo
Porsche 991 turbo S
The muffler can be fitted on all 911 Turbo and Turbo S versions, both 991.1 and 991.2
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£2,153.85
Now £2,110.77
Orderable
Sports exhaust rear silencer straight pipe Porsche 911 GT3 GT3 RS and 911 R
Code: TSPO991GT317.001.T
Sports exhaust rear silencer titanium straight pipe Porsche 911 GT3 GT3 RS and 911 R 2013-2019
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT317.001.T
The product you are viewing cross references to these numbers
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
TSPO991GT317.001.T
99711102792
99711102799
99111102790
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 GT3 4.0L
£3,338.47
Now £3,271.70
Orderable
Sports exhaust rear silencer straight pipe Porsche 997 GT3 and GT3 RS
Code: TSPOGT3C10.900.AT
Sports exhaust rear silencer straight pipe Porsche 997 GT3 and GT3 RS
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
Product Vehicle Group
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£2,369.24
Now £2,321.86
Orderable
Sports exhaust side silencer straight pipe non valved Porsche 991 GT3 and GT3 RS
Code: 3606609140
Sports exhaust side silencer straight pipe (non valved) Porsche 991GT3 and GT3 RS
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609140
The product you are viewing cross references to these numbers
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Material: Stainless Steel 304
Replacement for Genuine muffler 991.111.048.81
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609140
99711104782
99711104784
99711104781
99711104882
99711104881
99711104884
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£695.00
Now £681.10
In stock
Sports exhaust silencer Porsche 991.2 Carrera 2015-2019
Code: TSPO991T16.002.A
Sports exhaust standard silencer Porsche 991.2 Carrera 2015-2019
Fits
Porsche 991.2 Carrera 2015-2019
NOT S
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera exhaust system differs from the Carrera S one in that it does not have bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Fits
Porsche 991.2 Carrera 2015-2019
NOT S
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
INSTALLATION
The Carrera exhaust system differs from the Carrera S one in that it does not have bypass valves.
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips
EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
END TIPS NUMBER AND POSITION
2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
Product Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
£2,153.85
Now £2,110.77
Orderable
Titanium Exhaust final muffler with carbon tailpipes Porsche 991 GT3 - DesignTek
Code: 3606609124
Titanium Exhaust final muffler with carbon tailpipes
High quality titanium exhaust rear section compatible with OE rear mufflers. Complimented by carbon fibre tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609124
The product you are viewing cross references to these numbers
High quality titanium exhaust rear section compatible with OE rear mufflers. Complimented by carbon fibre tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606609124
99711102799
99711102790
99711102792
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
£1,075.00
Now £1,053.50
In stock
DISPLAYING 1 to 16 (of 16 products)
Also found on these pages
About Sport Silencers / Mufflers
Title: Upgrading Your Porsche's Exhaust System: Original Porsche vs. Aftermarket Mufflers and Sports Exhaust
Keywords: Porsche, exhaust mufflers, sports exhaust, upgrade, replacement, technical specifications, known issues, Design911, professional advice
Summary:
Original Porsche Exhaust Mufflers:
Designed and manufactured by Porsche for specific models
Engineered to meet stringent quality standards
Precisely tuned for optimal performance and sound
Maintains the authenticity and originality of your Porsche
Compatible with existing components and systems
Aftermarket Exhaust Mufflers:
Produced by third-party manufacturers specializing in performance upgrades
Offer a wide range of options for customization
Can enhance exhaust note, performance, and aesthetics
May provide better flow dynamics for improved engine efficiency
Consider compatibility and fitment with your Porsche model
Sports Exhaust Systems:
Designed to maximize performance and enhance the driving experience
Typically include larger diameter pipes, sportier mufflers, and optimized airflow
Offer increased horsepower and torque
Produce a more aggressive and exhilarating exhaust sound
Check local regulations regarding noise restrictions
When considering purchasing an exhaust muffler or sports exhaust for your Porsche, several factors should be considered. Firstly, determine your specific requirements, whether it's a slight improvement in sound or a significant performance boost. Research the technical specifications and compatibility of the chosen exhaust system with your Porsche model. Consider your budget and the reputation of the manufacturer or retailer. It's crucial to ensure the product is backed by warranties or guarantees.
At Design911, we can assist you in finding the correct exhaust part for your Porsche. Our knowledgeable team can offer professional advice based on your requirements and guide you through the selection process. We stock a wide range of original Porsche parts as well as reputable aftermarket options, ensuring you have access to high-quality choices. Trust Design911 to help you enhance your Porsche's performance and provide an unmatched driving experience.
Note: The summary provided above is a general overview of the benefits and considerations related to upgrading the exhaust system of a Porsche vehicle. It's always recommended to consult with a professional and consider individual vehicle specifications and regulations before making any modifications.
You may also like
-
Switchable Silencers / Mufflers
-
All Silencers / Mufflers
-
Catalyst / Bypass
-
Manifold / Headers
-
Exhaust Tail Pipes
-
Heat Exchangers
-
Exhaust Package
-
Exhaust Gaskets
-
Exhaust Nuts / Bolts / Studs
-
Brackets / Clamps / Straps
-
Exhaust Fitting Kits
-
Sport Exhaust Vacuum Parts
-
Fabspeed Exhaust
-
Lambda Sensors / Probes
-
Lambda Sensor Extensions
Popular Models
