Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://www.design911.com/images/schemaLogo.png https://www.design911.com/images/schemaLogo.png +443456003478 https://www.design911.com Facebook Instagram

Bilstein EVO SE

Refine by Car Type
Filter by brand
DISPLAYING 1 to 2 (of 2 products)
AirLift lift for front axle upgrade kit by CARGRAPHIC raising the body by 55mm
Code: AIRLIFTKIT
CARGRAPHIC AirLift Evolution Upgrade Kit

cargraphic

The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.
Best Price
BILSTEIN EVO SE coilover suspension for Porsche 992
Code: 49-303940
BILSTEIN EVO SE Porsche Coilover Suspension

bilstein evose

Fits:
Porsche 992 C2 / C2S / C4 / C4S with PASM, for cars without Lift System


Porsche coilover suspension with BILSTEIN DampTronic® X technology. The brand-new, high-performance Porsche coilover suspension uses the original BILSTEIN DampTronic® X technology, which is already installed in the Porsche 911 production model: the BILSTEIN EVO SE coilover kit is fully compatible with the newest Porsche Active Suspension Management (PASM) and can therefore be easily fitted using the plug-and-play method.

Porsche 992 lowering: 35 mm lowering – with threads to spare and a technical component report – lowers the center of gravity and gives the 911 an even sportier look. The Porsche coilover suspension impresses with higher cornering speeds and gives experienced sports drivers even more control.

Increased driving dynamics for Porsche 992. The BILSTEIN DampTronic® X technology in particular has a major influence on the increased driving dynamics: the BILSTEIN EVO SE shock absorbers are equipped with very fast-switching adjustment valves, which enable damping forces to adjust to the calculated damping requirement within milliseconds. This technology calculates and adjusts the damping several hundred times per second, depending on the driving situation and wheel-selectively.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-303940
49-303940

The product you are viewing cross references to these numbers
Best Price
DISPLAYING 1 to 2 (of 2 products)
You may also like
Popular Models