Airmatic

Evolution Lowering Kit Taycan *CARS WITH AIR SUSPENSION ONLY (15-50MM)



Fits:
Taycan
Taycan Cross Turismo

Our new Evolution lowering kits have been designed to address all the short comings of our competitors lesser quality kits and to offer greater benefits over our original kits.
We believe our new Evolution kits are the greatest engineered, easiest to install, most durable, safest, most functional kits available today and priced competitively.
The Evolution lowering kits have been designed to include the following features and benefits –
• Easy installation takes 45 minutes to 1 hour
• No need to remove to adjust saving time on installation and adjusting
• Black zinc coated bars and ball joints are up to 45x more corrosion resistant than other kits
• Additional retaining clips for greater safety.
• Can be adjusted to achieve OEM ride height.
• Specially designed billet aluminium adjusters with 'grip-it' knurled sections
• Stainless steel nuts and clips to increase durability and longevity.
• Stake pressed threads to securely attach static ball joints to the linkage bars

How it works:

Lowers between 15mm- 50mm

On Porsche there is a Ride Height Sensor on each of the four Control Arms. These sensors are connected to the frame of the vehicle by a short linkage called a Sensor Arm. The stock sensor arms or "links" are of fixed length and move with the suspension. They establish the position of the sensor which indicates to the computer what height the vehicle should be sitting at.

To see what these links look like on most vehicles is easy. Put the vehicle to the highest suspension setting and look straight into the wheel well on top of the front tire. You may need a flashlight. In the rear you have to look from underneath.

Our kit replaces the stock sensor arms with Fully Adjustable Aluminum Links. When extended, they change the voltage sent to the computer by the sensor. The computer then evaluates the ride height to be higher than the factory setting and compensates by lowering the vehicle.

Electronic Modules are really expensive and limit the height that your vehicle can be dropped. They often have to be hard wired which may lead to factory warranty issues. Worst of all, installation of a lowering module is extremely difficult to reverse. Setting the links to the original link length places your vehicle to the stock height. The standard/reverse thread design allows you to adjust the links on the vehicle for easy height modification.

FAQ:

Q. Will lowering my vehicle improve the handling?
A. Yes. A lower center of gravity always helps your vehicle's handling.

Q. Will the raise button inside the vehicle still work?
A. Yes.

Q. Will I need an alignment?
A. Yes. Any time a vehicle is lowered the alignment should be checked.

Q. How will the links affect my warranty?
A. The kits have never caused any issue on any vehicle. If for some reason your vehicle's air suspension failed while under warranty, we recommend installing the original links which takes no longer than 60 minutes to do.

Evolution 降低套件 MACAN *仅适用于带空气悬架的汽车 (15-50MM)

#空气动力#

我们全新的 Evolution 降低套件旨在解决我们竞争对手质量较差套件的所有缺点，并提供比我们原装套件更大的优势。
我们相信，我们的新款 Evolution 套件是当今设计最精良、安装最简单、最耐用、最安全、功能最齐全的套件，而且价格极具竞争力。
Evolution 降低套件的设计包含以下特点和优点 –
• 安装简便，仅需 45 分钟至 1 小时
• 无需拆卸即可调整，节省安装和调整时间
• 黑色镀锌杆和球接头的耐腐蚀性比其他套件高出 45 倍
• 附加固定夹以提高安全性。
• 可以调整以达到 OEM 行驶高度。
• 专门设计的铝坯调节器，带有“抓握”滚花部分
• 不锈钢螺母和夹子可提高耐用性和使用寿命。
• 用压紧螺纹将静态球接头牢固地固定到连杆上


适合：
配备空气悬架的保时捷 Macan

怎么运行的：

降低 15mm 至 50mm 之间

保时捷的四个控制臂上各有一个行驶高度传感器。这些传感器通过称为传感器臂的短连杆连接到车架。原装传感器臂或“连杆”长度固定，随悬架移动。它们确定传感器的位置，从而向计算机指示车辆应处于什么高度。

要查看大多数车辆上的这些连杆是什么样子的，很简单。将车辆调到最高悬挂设置，然后直视前轮胎上方的轮舱。您可能需要手电筒。在后部，您必须从下方查看。

我们的套件用完全可调的铝制连杆取代了原装传感器臂。当它们伸展时，会改变传感器发送给计算机的电压。然后计算机会评估行驶高度是否高于出厂设置，并通过降低车辆进行补偿。

电子模块非常昂贵，并且会限制车辆的降下高度。它们通常必须采用硬接线，这可能会导致工厂保修问题。最糟糕的是，降低模块的安装极难逆转。将连杆设置为原始连杆长度会将您的车辆置于原厂高度。标准/反向螺纹设计允许您调整车辆上的连杆，以便轻松修改高度。

常问问题：

问：降低车辆高度能改善操控性吗？
答：是的。较低的重心总是有助于车辆的操控。

问：车内的升高按钮还能用吗？
答：是的。

问：我需要进行校准吗？
答：是的。每次降低车辆时都应检查定位。

问：这些链接会对我的保修产生什么影响？
答：这些套件从未在任何车辆上造成任何问题。如果您的车辆的空气悬架在保修期内因某种原因出现故障，我们建议安装原装连杆，安装时间不超过 60 分钟。

Evolution 降低套件 9YA / 9Y0 / 9YB CAYENNE *仅限带空气悬架的汽车 (15-50MM)

#航空#

我们的新型 Evolution 降低套件旨在解决竞争对手质量较低的套件的所有缺点，并提供比我们原来的套件更大的优势。
我们相信，我们的新型 Evolution 套件是当今设计最出色、最易于安装、最耐用、最安全、功能最齐全的套件，且价格极具竞争力。
Evolution 降低套件的设计包含以下功能和优点 –
• 安装简便，只需 45 分钟到 1 小时
• 无需拆卸调整，节省安装调整时间
• 黑色镀锌棒和球形接头的耐腐蚀性比其他套件高出 45 倍
• 额外的固定夹可提高安全性。
• 可调节以达到 OEM 行驶高度。
• 专门设计的铝坯调节器，带有“抓握式”滚花部分
• 不锈钢螺母和夹子可提高耐用性和使用寿命。
• 桩压螺纹，将静态球接头牢固地固定到连杆上


适合：
配备空气悬架的保时捷卡宴

怎么运行的：

降低 15mm- 50mm

保时捷的四个控制臂上各有一个行驶高度传感器。这些传感器通过称为传感器臂的短连杆连接到车辆的框架。库存传感器臂或“连杆”具有固定长度并随悬架移动。他们确定传感器的位置，向计算机指示车辆应该停在什么高度。

要查看这些链接在大多数车辆上的样子很容易。将车辆调至最高悬架设置，并直视前轮胎顶部的轮舱。您可能需要一个手电筒。在后面，你必须从下面看。

我们的套件用完全可调的铝制连杆取代了库存传感器臂。当扩展时，它们会改变传感器发送到计算机的电压。然后，计算机评估行驶高度高于出厂设置，并通过降低车辆进行补偿。

电子模块非常昂贵并且限制了车辆的掉落高度。它们通常必须采用硬接线，这可能会导致工厂保修问题。最糟糕的是，降低模块的安装极难逆转。将链接设置为原始链接长度将使您的车辆达到库存高度。标准/反螺纹设计允许您调整车辆上的连杆，以便轻松修改高度。

常问问题：

问：降低车辆高度会改善操控性吗？
答：是的。较低的重心总是有助于车辆的操控。

问：车内的升起按钮还能用吗？
答：是的。

问：我需要对齐吗？
答：是的。任何时候降低车辆时都应检查对准情况。

问：这些链接将如何影响我的保修？
答：这些套件从未对任何车辆造成任何问题。如果由于某种原因您的车辆的空气悬架在保修期内出现故障，我们建议安装原始链接，该操作时间不超过 60 分钟。

Evolution Lowering Kit PAMAMERA 970 MK2 *CARS WITH AIR SUSPENSION ONLY (15-50MM)



Our new Evolution lowering kits have been designed to address all the short comings of our competitors lesser quality kits and to offer greater benefits over our original kits.
We believe our new Evolution kits are the greatest engineered, easiest to install, most durable, safest, most functional kits available today and priced competitively.
The Evolution lowering kits have been designed to include the following features and benefits –
• Easy installation takes 45 minutes to 1 hour
• No need to remove to adjust saving time on installation and adjusting
• Black zinc coated bars and ball joints are up to 45x more corrosion resistant than other kits
• Additional retaining clips for greater safety.
• Can be adjusted to achieve OEM ride height.
• Specially designed billet aluminium adjusters with 'grip-it' knurled sections
• Stainless steel nuts and clips to increase durability and longevity.
• Stake pressed threads to securely attach static ball joints to the linkage bars


Fits:
Porsche Cayenne with Air Suspension

How it works:

Lowers between 15mm- 50mm

On Porsche there is a Ride Height Sensor on each of the four Control Arms. These sensors are connected to the frame of the vehicle by a short linkage called a Sensor Arm. The stock sensor arms or "links" are of fixed length and move with the suspension. They establish the position of the sensor which indicates to the computer what height the vehicle should be sitting at.

To see what these links look like on most vehicles is easy. Put the vehicle to the highest suspension setting and look straight into the wheel well on top of the front tire. You may need a flashlight. In the rear you have to look from underneath.

Our kit replaces the stock sensor arms with Fully Adjustable Aluminum Links. When extended, they change the voltage sent to the computer by the sensor. The computer then evaluates the ride height to be higher than the factory setting and compensates by lowering the vehicle.

Electronic Modules are really expensive and limit the height that your vehicle can be dropped. They often have to be hard wired which may lead to factory warranty issues. Worst of all, installation of a lowering module is extremely difficult to reverse. Setting the links to the original link length places your vehicle to the stock height. The standard/reverse thread design allows you to adjust the links on the vehicle for easy height modification.

FAQ:

Q. Will lowering my vehicle improve the handling?
A. Yes. A lower center of gravity always helps your vehicle's handling.

Q. Will the raise button inside the vehicle still work?
A. Yes.

Q. Will I need an alignment?
A. Yes. Any time a vehicle is lowered the alignment should be checked.

Q. How will the links affect my warranty?
A. The kits have never caused any issue on any vehicle. If for some reason your vehicle's air suspension failed while under warranty, we recommend installing the original links which takes no longer than 60 minutes to do.

Evolution Lowering Kit PAMAMERA 970 MK1 *CARS WITH AIR SUSPENSION ONLY (15-50MM)



Our new Evolution lowering kits have been designed to address all the short comings of our competitors lesser quality kits and to offer greater benefits over our original kits.
We believe our new Evolution kits are the greatest engineered, easiest to install, most durable, safest, most functional kits available today and priced competitively.
The Evolution lowering kits have been designed to include the following features and benefits –
• Easy installation takes 45 minutes to 1 hour
• No need to remove to adjust saving time on installation and adjusting
• Black zinc coated bars and ball joints are up to 45x more corrosion resistant than other kits
• Additional retaining clips for greater safety.
• Can be adjusted to achieve OEM ride height.
• Specially designed billet aluminium adjusters with 'grip-it' knurled sections
• Stainless steel nuts and clips to increase durability and longevity.
• Stake pressed threads to securely attach static ball joints to the linkage bars


Fits:
Porsche Cayenne with Air Suspension

How it works:

Lowers between 15mm- 50mm

On Porsche there is a Ride Height Sensor on each of the four Control Arms. These sensors are connected to the frame of the vehicle by a short linkage called a Sensor Arm. The stock sensor arms or "links" are of fixed length and move with the suspension. They establish the position of the sensor which indicates to the computer what height the vehicle should be sitting at.

To see what these links look like on most vehicles is easy. Put the vehicle to the highest suspension setting and look straight into the wheel well on top of the front tire. You may need a flashlight. In the rear you have to look from underneath.

Our kit replaces the stock sensor arms with Fully Adjustable Aluminum Links. When extended, they change the voltage sent to the computer by the sensor. The computer then evaluates the ride height to be higher than the factory setting and compensates by lowering the vehicle.

Electronic Modules are really expensive and limit the height that your vehicle can be dropped. They often have to be hard wired which may lead to factory warranty issues. Worst of all, installation of a lowering module is extremely difficult to reverse. Setting the links to the original link length places your vehicle to the stock height. The standard/reverse thread design allows you to adjust the links on the vehicle for easy height modification.

FAQ:

Q. Will lowering my vehicle improve the handling?
A. Yes. A lower center of gravity always helps your vehicle's handling.

Q. Will the raise button inside the vehicle still work?
A. Yes.

Q. Will I need an alignment?
A. Yes. Any time a vehicle is lowered the alignment should be checked.

Q. How will the links affect my warranty?
A. The kits have never caused any issue on any vehicle. If for some reason your vehicle's air suspension failed while under warranty, we recommend installing the original links which takes no longer than 60 minutes to do.

Evolution Lowering Kit 955/957/958 CAYENNE *CARS WITH AIR SUSPENSION ONLY (15-50MM)

Our new Evolution lowering kits have been designed to address all the short comings of our competitors lesser quality kits and to offer greater benefits over our original kits.
We believe our new Evolution kits are the greatest engineered, easiest to install, most durable, safest, most functional kits available today and priced competitively.
The Evolution lowering kits have been designed to include the following features and benefits –
• Easy installation takes 45 minutes to 1 hour
• No need to remove to adjust saving time on installation and adjusting
• Black zinc coated bars and ball joints are up to 45x more corrosion resistant than other kits
• Additional retaining clips for greater safety.
• Can be adjusted to achieve OEM ride height.
• Specially designed billet aluminium adjusters with 'grip-it' knurled sections
• Stainless steel nuts and clips to increase durability and longevity.
• Stake pressed threads to securely attach static ball joints to the linkage bars


Fits:
Porsche Cayenne with Air Suspension

How it works:

Lowers between 15mm- 50mm

On Porsche there is a Ride Height Sensor on each of the four Control Arms. These sensors are connected to the frame of the vehicle by a short linkage called a Sensor Arm. The stock sensor arms or "links" are of fixed length and move with the suspension. They establish the position of the sensor which indicates to the computer what height the vehicle should be sitting at.

To see what these links look like on most vehicles is easy. Put the vehicle to the highest suspension setting and look straight into the wheel well on top of the front tire. You may need a flashlight. In the rear you have to look from underneath.

Our kit replaces the stock sensor arms with Fully Adjustable Aluminum Links. When extended, they change the voltage sent to the computer by the sensor. The computer then evaluates the ride height to be higher than the factory setting and compensates by lowering the vehicle.

Electronic Modules are really expensive and limit the height that your vehicle can be dropped. They often have to be hard wired which may lead to factory warranty issues. Worst of all, installation of a lowering module is extremely difficult to reverse. Setting the links to the original link length places your vehicle to the stock height. The standard/reverse thread design allows you to adjust the links on the vehicle for easy height modification.

FAQ:

Q. Will lowering my vehicle improve the handling?
A. Yes. A lower center of gravity always helps your vehicle's handling.

Q. Will the raise button inside the vehicle still work?
A. Yes.

Q. Will I need an alignment?
A. Yes. Any time a vehicle is lowered the alignment should be checked.

Q. How will the links affect my warranty?
A. The kits have never caused any issue on any vehicle. If for some reason your vehicle's air suspension failed while under warranty, we recommend installing the original links which takes no longer than 60 minutes to do.