Nordschleife

适用于保时捷 944 S2 968 减震器支腿的螺纹套管（一对），适用于 Bilstein B6 减震器。

适合：
保时捷 944 S2 / 968

用于转换保时捷 944 S2 和 968 型号的两个标准减震器支腿的螺纹套管。它们允许使用 Bilstein B6 减震器。

程序：

1.凿开旧减震器部件的灌浆口并拉出减震器筒。

2. 将管子缩短44.5mm

3. 去除焊接区域的螺纹套上的锌层

4. 小心地将螺纹套管锤入管内，并在四周焊接好（焊接前，检查管与螺纹套管之间的间隙是否合适。必须能够用螺母将阻尼器筒拧紧 5 圈）。

5. 将焊缝打磨光滑，涂漆并组装减震器

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7305

您正在查看的产品与这些编号存在交叉引用关系

Rear axle upper carrier set (left and right)

Replacement for: 477501075A, 477501076A, 94433107500, 94433107501, 94433107600, 94433107601.



Fits:
Porsche 924 1976-85
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968 1992-95

These two support bearings attach the rear axle of the Porsche 924/944 and 968 to the body. In the original as a rubber-mounted connection, the torque arm of the axle is mounted with it on top behind the wheel house to the chassis. The original rubber bearings are after the decades porous, corroded and new hardly available. These rigid bearings replace the rubber-to-metal bearings 1-to-1 and provide a rigid connection between the body and the rear axle. This allows you to replace the defective bearings at a manageable cost while tuning your vehicle to be more sporty. The stiffened support reduces the pitching behaviour of the vehicle. The relative movements between body and axle are prevented and the vehicle becomes tighter. The axle mounts are milled from a high-quality steel alloy and galvanized.


Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1261

您正在查看的产品与这些编号存在交叉引用关系

Speedometer conversion kit.
To convert your speedometer from mph to km/h



Fits:
Porsche 911 Carrera 1984-89

Description:

This conversion kit can be used to convert speedometers from the '84-'89 911G (except turbo) that are from US first delivery and have a 20x30 gear as the drive on the worm.

The kit includes the four gears that come in power flow order right after the electric motor with the drive worm. Also included is the corresponding speedometer pulley and a new speedometer glass.

Please note that this set can only be used for tachos that originally have a 20x30 dual gear.
Also, the shape of the housing shown in the product images is important to fit the new gears.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5987

您正在查看的产品与这些编号存在交叉引用关系

Glass set for speedometer instruments KMH.
The km/h complete set made of high quality acrylic glass.



Fits:
Porsche 911 / 912 1965-73

Description:

This set of instrument discs is made of high quality acrylic glass in true to original form. The set of five discs is exactly suitable for the Porsche 911 F-model instruments and replaces your cracked, scratched or blind instrument discs. At the same time, the glasses are in no way inferior to the originals and are hardly distinguishable from the original after peeling off the green protective film.

In addition to this set of glass for the 911 T/E/S and 912 from 1965 to 1973,

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5981

您正在查看的产品与这些编号存在交叉引用关系

Display set for climate control V1 + manual
Contents: 1x display, 2x conductive rubbers, 1x UVEX cloth.



Fits:
Porsche 986 Boxster >>06.2002
Porsche 996 >>06.2002

Description:

The early LCDs suffer from the claim of long life and give up their function after more than a decade in use. So the climate control display is also a typical defective component on the Porsche Boxster. With this repair kit, you can solve the problem cheaply and in the long run.

Tip:

We advise against buying an air conditioning control unit that is "still intact": it is only a matter of time before the display here has also reached its life expectancy and expires. Therefore, it is better to save time, money and aggravation right away and install a display that was manufactured true to the original with the help of modern manufacturing technology and tighter tolerances.

Repair note:

The installation should be done by a professional, but is supported by an illustrated manual in the languages DE/EN/FR/ES/RU/IT.
Only a screwdriver and needle nose pliers are required for the swap. No soldering work is required.

Design:

The LCD corresponds to the Porsche original design and is not a "similar" third-party solution. Partially Audi displays are installed, whose installation requires adjustment work in the housing and do not have the original design.

Our LCD also takes into account the differences between first and second generation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1105

您正在查看的产品与这些编号存在交叉引用关系

Camshaft timing chain and sliding shoe set.



The four-valve technology is one of the sensitive parts of these otherwise robust engines: regular replacement of the chain and its sliding elements is essential to avoid major damage. The timing chain maintenance kit is quality "Made in Germany".

Notice: In many vehicles, only the upper sliding shoe and the chain have been replaced over the years for cost reasons. But also the lower sliding shoe runs in and becomes porous. Therefore, better prevent the risk and take a look under the valve cover.

Fits:
Porsche 928 S 5.0L 1985-94 two maintenance kits necessary
Porsche 928 S4 1986-91 two maintenance kits necessary
Porsche 928 GT 1989-91 two maintenance kits necessary
Porsche 928 GTS 1991-95 two maintenance sets necessary
Porsche 944 S 1986-88
Porsche 944 S2 1989-91

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1104

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster US version.



Fits:
Porsche 911 (Type 996) 1997 - 09.2001
Porsche Boxster (Type 986) 1996 - 06.2002

Description:

If the display on your vehicle only works incompletely or it is out or tarnish, then usually defective displays and / or their conductive contact are the cause. With the help of this offer, you as a hobbyist screwdriver can easily and independently repair your instrument.
The scope of delivery includes a puller for the speedometer needle and a T-soldering tip. This must be heated with a soldering iron so that the display conductor foil can be ironed on. No soldering is required as this display is ironed on.

Variants:

These are all three displays in the instrument cluster. (See picture). The displays fit speedometers with mph display.

Quality:

Through many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent original designs. Occasionally cheap replicas with dangerous quality deficits reach the market: We cannot offer advice for installation and follow-up problems on instruments caused by third-party products. We ask for your understanding in this regard.

Dimensions of the display glass over all: 28.5 x 45.5 mm / 45 x 62 mm / 28.5 x 45 mm.

Scope of delivery:
1 display, 1 speedometer needle puller, 1 T-soldering tip

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6079

您正在查看的产品与这些编号存在交叉引用关系

Screw set for struts front axle.
Reference numbers: 94434317500, 90008205802, 171407265, N0221414.



The offered set is necessary when the suspension on the front axle is replaced or toe-in and camber are readjusted: The bolts attach the McPherson strut to the wheel carrier. The eccentric is used to adjust the suspension.

Fits:
Porsche 924
Porsche 944
Porsche 968

These are high-strength bolts and stop nuts, "Made in Germany", as they are to be provided for safety-relevant suspension components. Please observe the specified tightening torques and have the assembly carried out by qualified personnel.

According to assembly specifications, used chassis bolts and locknuts must NOT be reused after being tightened once. The full clamping force of the lock nuts will not be achieved a second time due to plastic deformation during the tightening process.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1123

您正在查看的产品与这些编号存在交叉引用关系

Bock engine stand for workbench.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986/987 Boxster
Porsche 987c Cayman

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer engine mounts. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand.
Here you get the required trestle to be able to mount the engine mount also on a workbench or the like.
We have the engine stands for all classic Porsche as well as the 3.4-3.8L waterboxers in our program.
The stand is for engine mounts with a diameter of 60mm.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6822

您正在查看的产品与这些编号存在交叉引用关系

Engine stand for engine mount.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.

Notice: The colour of the part may differ from the colour shown.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6898

您正在查看的产品与这些编号存在交叉引用关系

Engine stand for engine mount.



Fits:
Porsche 996/997 Carrera
Porsche 986/987 Boxster
Porsche 987C Cayman
(Not for 911 turbo and GT2/GT3 models)

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using an additionally available bearing block.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6806

您正在查看的产品与这些编号存在交叉引用关系

Short throttle valve wheel for Porsche 924S/944 engine SPORT



Fits:
Porsche 924 S
Porsche 944 (except S/S2/turbo)

This new throttle valve control wheel changes the pedal angle-throttle valve angle ratio from a progressive to a linear curve. This results in a noticeably faster throttle response in the lower rpm range.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5080

您正在查看的产品与这些编号存在交叉引用关系

Connector housing lambda sensor.



Fits:
Porsche 911 G 1980-84 US with Cat

Here you will receive a housing for the lambda sensor plug of your Porsche 911 3.0 US model from 1980 to 1984. This plug housing is for the unheated lambda sensor with a single pole plug.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7306

您正在查看的产品与这些编号存在交叉引用关系

Pedal floor board , LEFT, for LHD Cars.



Fits:
For LHD cars
Porsche 964 1989-94 Manual Transmission
Porsche 993 1994-98 6-Speed Manual transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99355106300

您正在查看的产品与这些编号存在交叉引用关系

Belt tensioner for toothed belt.
Made in Germany



Fits:
Porsche 924S 2.5L 1986-88
Porsche 944 2.5L / 2.7L 1986>>
Porsche 944 S2 3.0L
Porsche 944 Turbo 951 2.5L

Here you get a tool to adjust the belt tensioner of the timing belt on your Porsche 924S and 944 from 1986 onwards. With this tool the adjustment of the belt tension is also possible under narrow space conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7314

您正在查看的产品与这些编号存在交叉引用关系

Rear wiper blind plug.



Fits:
Porsche 924 >>1988
Porsche 944 >>1988

Here you can get a blind plug for the rear window wiper, this fits all Porsche 924 and 944 up to 1988. Please check the hole diameter in the window before buying. This must be about 17 mm. Alternative identification feature is the M6 nut on the wiper arm. The later models have a diameter of approx. 27 mm, for this you will find the matching dummy plug in our store.

his blind plug ensures a clean and inconspicuous sealing of the hole in the rear window when the rear wiper is removed.

In motor sports and many leisure applications, the rear wipers are not needed on the vehicle and are removed for weight or optical reasons. Many transaxle models are now only driven in good weather and the rear wiper, which is hardly used anyway, is no longer necessary. Because many self-made plugs do not completely seal, we have decided to use this special solution.

The reduced weight due to the removal of the wiper motor ensures that the tailgate opens automatically as soon as it is unlocked.

The cap is made of matt black painted aluminum and is sealed on both sides with a gasket.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7313

您正在查看的产品与这些编号存在交叉引用关系

Wrench for support joint groove nut.
Here you will receive a special tool for mounting and dismounting the groove nut on the support joint of your Porsche 911 F and 911 G.



Fits:
Porsche 911F / 911G 1969-89
Porsche 930 1975-89
Porsche 914 1970-76

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7311

您正在查看的产品与这些编号存在交叉引用关系

Screw-in connector for radiator, aluminium.
Reference number: 94410692700.



Fits:
Porsche 924S 1986-88
Porsche 944 1985-91
Porsche 968 1992-95

Here you will receive a screw-in connector made of aluminium for the radiator of your Porsche 924, 944 II, 944 turbo and 968, which connects the radiator with the hose of the expansion tank.

Made in Germany

Click 'Zoom in' for large parts diagram.
Diagram ref no 27

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94410692700

您正在查看的产品与这些编号存在交叉引用关系

Bolts set for swords rear axle.



Fits:
Porsche 911 (73-89)
Porsche 924S
Porsche 944
Porsche 968

12-piece bolt set for the rear axle of various Porsche models.

The original screws are often rusted tight and wrench flats rarely survive disassembly without damage. Here you get a new set of screws.

Can be used on both sides (Left and Right).

Reference numbers:
91133330301, 91133330501, 91133330501, 90036000701,

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133330300

您正在查看的产品与这些编号存在交叉引用关系

Shift lever repair kit.
Reference numbers: 477711205D



Fits:
Porsche 924 / 924S 1976-85 (except turbo)
Porsche 944 1982-91 with manual transmission
* not for so-called dog-leg transmissions (1st gear down left)

This set, "Made in Germany" includes everything necessary to eliminate the shift lever play:
- Shims of different thickness
- Lubricant
- Ball socket
- Circlip
- Shift lever made of wear-resistant S355

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

477711205D

您正在查看的产品与这些编号存在交叉引用关系

Bearing for intermediate shift lever part number 94442401302 / 94442401301 / 94442401304.



Fits:
Porsche 924S 1986-88
Porsche 944 1982-91
Porsche 968

The intermediate shift levers connect the transmission input shafts with the shift linkage. The lever is deflected by this plastic bearing and is deflected in almost all vehicles. This results in excessive play in the shift linkage in the Porsche 924, 944 and 968. You can eliminate the sloppy feeling of the worn out gear lever with this.

The bearing fits all Porsche four-cylinder transaxles, whether 924S or 944S2/turbo.

Click 'Zoom in' for large parts diagram.
The item is in between No.21

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

94442401304

您正在查看的产品与这些编号存在交叉引用关系

Camshaft adjustment tool kit.
Very good material quality



Fits:
Porsche 986 Boxster
Porsche 996 Carrera
Porsche 997 Carrera

This tool kit is for locking the Porsche 996/986/997 and 987 camshaft. The set is suitable for the 3.4L and 3.6L and 3.8L Boxer engines. The tool set was manufactured according to the most modern production methods and from own development. The surface of the auxiliary tool is electrogalvanized for high resistance. This is of particular importance for work on the open engine.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

00072196860

您正在查看的产品与这些编号存在交叉引用关系

The complete set of high quality acrylic glass



Fits:
Porsche 911 SC / Carrera and 930 / Turbo from 1974 to 1989

Description:
This set instrument discs is made of high quality acrylic glass in true to original form. The set of five discs fits exactly the Porsche 911 G model instruments and replaces your cracked, scratched or blind instrument discs. The glasses are in no way inferior to the original and are hardly distinguishable from the original after peeling off the green protective foil.

Note :that the diameters of the instrument cluster and fuel gauge vary between models. Also, the central hole with paragraph for the dial of the clock is not identical on all models. With our ready-made sets you get the right lenses for your Porsche instruments.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5982

您正在查看的产品与这些编号存在交叉引用关系

Drop link set, Rear.
Reference numbers: 477511051A, 477511051, 477511051B



Fits:
Porsche 924
Porsche 944
Porsche 968

Description:
The newly reproduced tie rods complete with mounting hardware. The set consists of two pendulum supports with rubber bearings. The Pendestützen have already installed new rubber bushes in true to the original hardness. These tie rods are usually knocked out on all Porsche models 924/944 and 968 after years and should be replaced. If you want to keep your vehicle true to the original, you are well served with these coupling rods in the original design.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1260

您正在查看的产品与这些编号存在交叉引用关系

2x rubber insert for rear hatch lock.



Fits:
Porsche 924
Porsche 944
Porsche 968

Description:
The old locks of the Porsche 924, 944 and 968 tailgates often have the problem of creaking and rattling noises while driving. The cause lies in this silicone insert: In hardly any vehicle, the original rubber inserts in the lock are still intact, so that the pins of the rear window can move undamped by body movements back and forth. The formerly white material is still completely preserved in hardly any vehicle and usually discoloured and darkened very dark. The funnel-shaped insert is pressed from above into the locks of the boot lid. After cleaning and lubricating the pawls in the lock, you can simply squeeze the rubber inserts into the lock from above. In our example photo in red, the four ring-shaped heels must protrude out of the castle. So you can eliminate the unpleasant noises of the rear window and completely revise their rear locks.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5947

您正在查看的产品与这些编号存在交叉引用关系

LCD display for rev counter on-board computer in KMH Only



Fits:
Porsche 964
Porsche 993

Description:
If the display of the on-board computer in the tachometer only works incompletely on your vehicle, defective displays are usually the cause. As a hobbyist without electronics expertise, this offer also enables you to easily and independently repair your instrument. The installation requires no soldering and no special tools. After you have opened your tachometer and removed the old glass, you can replace it with this new part in the exact true to original design. It requires no configuration or adjustment of the display. If you have any questions, feel free to contact us. Our email and telephone service is available for our opening hours reliable and advisory to the side. Through many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs. Chance of cheap replicas with dangerous quality deficiencies on the market: For follow-up problems on instruments, which are created by inferior foreign make, we can not offer advice. We ask for your understanding.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5932

您正在查看的产品与这些编号存在交叉引用关系

Display set for climate control unit A /C repair.



Fits:
Porsche 997 all models
Porsche 987 Cayman all models

Will not work with manual A/C system option code 572

Description:
The original climate control parts of the Porsche 997 and 987 Cayman / Boxster have the well-known problem of expiring advertisements. The display turns semicircular bright or no longer displays all icons properly. However, if the other function of the instrument is complete and only the display shows defects, you can use this repair kit to repair your climate control. The repair is without special tools and without soldering for untrained screwdrivers no problem. The display is plugged in and can be repaired with the help of our repair manual in a few minutes. So you not only preserve the originality of the vehicle, but save on the several hundred euros compared to a new climate control.

Tip: We generally advise against buying used, still intact climate control parts: it is only a matter of time before the display runs out. Better save time, money and trouble right away and build a display that has been faithfully manufactured using state-of-the-art manufacturing technology and tighter tolerances. Please do not hesitate to contact our customer service.

Repair instructions:
Installation should be carried out by a specialist. Suitable part numbers for comparison purposes (available on the control panel): 997.653.101.11 997.653.101.12 997.653.111.11 997.653.111.13 997.653.201.02 or 99765310111 99765310112 99765311111 99765311113 99765320102.

Design: The LCD corresponds to the Porsche original design and is not a "similar" third - party solution.

For Installation instruction please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5961

您正在查看的产品与这些编号存在交叉引用关系

LCD repair kit for climate control unit.



Fits:
Porsche 996 2002>>
Porsche 986 Boxster 2002>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1108

您正在查看的产品与这些编号存在交叉引用关系

LCD repair kit for outside temperature gauge. Incl bulb.
Porsche ref no 94464122300



Fits:
all Porsche 968 outside temperature readings

Description:
Most ads are broken after more than 20 years of use, used ones that still work are rare, are high traded and can fail at any time.
In this offer, you will purchase a repair kit for your temperature gauge.


Advantages:
• Original design
• New guide contact
• 1x new light bulb
• Extended service life thanks to better production technology
• Legal warranty and guarantee

Tip:
Avoid buying a "still" intact, used or NOS ad. It's only a matter of time before the display runs out. Save better time, money and trouble.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1166

您正在查看的产品与这些编号存在交叉引用关系

LCD repair kit for digital clock. Incl bulb.
Porsche ref no 94464121300, 94464191300.



Fits:
Porsche 944
Porsche 968 CS

The display is one of the most frequent sources of error on the 944 digital clock and is basically renewed during our repairs. If you bring a little technical know-how and do not fear the tricky work, you can handle the repair of your watch yourself with this set.

Note:
The repair kit alone is not a guarantee for a functional clock, in some cases, other components such as capacitors, transistors, tracks or the board are damaged.

For Installation Instructions please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1097

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster (US) yellow shade.
Contents: 1x display.



Fits:
Porsche Cayenne 9PA / 955 (except Turbo) US models

Description:
If the display only works incompletely on your vehicle or if it has started or stopped, then defective displays and / or their guide contacts are usually the cause. With this offer, you as a hobby screwdriver can easily and independently repair your instrument.
There are no soldering necessary as this display is plugged.

Variants:
It is the display which is located in the centre of the instrument cluster. It is the monochrome variant in yellow as it has been installed in the US variants. Not suitable for colour displays as in the Cayenne turbo!

Quality:
Thanks to many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6080

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster (EU) red shade.
Contents: 1x display.



Fits:
Porsche Cayenne 9PA / 955 (except Turbo) EU models

Description:
If the display only works incompletely on your vehicle or if it has started or stopped, then defective displays and / or their guide contacts are usually the cause. With this offer, you as a hobby screwdriver can easily and independently repair your instrument.
There are no soldering necessary as this display is plugged.

Variants:
It is the display which is located in the center of the instrument cluster. It is the monochrome variant in red as it has been installed in the European variants. Not suitable for colour displays as in the Cayenne turbo!

Quality:
Thanks to many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6082

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster right.
Contents: 1x display, 1x puller for the tachometer needle and 1x T-soldering tip.



Fits:
Porsche 996 (911) 1997 - 09.2001
Porsche 986 Boxster 1996 - 06.2002


Description:
If the display only works incompletely on your vehicle or if it has stopped, then defective displays and / or their guide contacts are usually the cause. With this offer, you as a hobby diyer can easily and independently repair your instrument.
The set includes a puller for the speedometer needle and a T-soldering tip. This must be heated with a soldering iron, so that the display circuit foil can be ironed. There are no soldering necessary as this display is ironed.

Variants:
It is the right display in the instrument cluster. (See picture) We also have the other two displays in the program. The displays only fit Tachos with km / h scale!

Service:
We permanently have over 250 variants of display elements and their accessories in stock. So we can quickly provide you with replacement whenever needed. For many vehicles we also have illustrated repair manuals (in English) or links to repair videos, which we can send you on request.

Quality:
Thanks to many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6078

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster centre.
Contents: 1x display, 1x puller for the tachometer needle and 1x T-soldering tip.



Fits:
Porsche 996 (911) 1997 - 09.2001
Porsche 986 Boxster 1996 - 06.2002

only for MPG and not L/100Km option

Description:
If the display only works incompletely on your vehicle or if it has stopped, then defective displays and / or their guide contacts are usually the cause. With this offer, you as a hobby diyer can easily and independently repair your instrument.
The set includes a puller for the speedometer needle and a T-soldering tip. This must be heated with a soldering iron, so that the display circuit foil can be ironed. There are no soldering necessary as this display is ironed.

Variants:
It is the middle display in the instrument cluster. (See picture) We also have the other two displays in the program. The displays only fit Tachos with km / h scale!




Service:
We permanently have over 250 variants of display elements and their accessories in stock. So we can quickly provide you with replacement whenever needed. For many vehicles we also have illustrated repair manuals (in English) or links to repair videos, which we can send you on request.

Quality:
Thanks to many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6077

您正在查看的产品与这些编号存在交叉引用关系

Display set for instrument cluster left.
Contents: 1x display, 1x puller for the tachometer needle and 1x T-soldering tip.



Fits:
Porsche 996 (911) 1997 - 09.2001
Porsche 986 Boxster 1996 - 06.2002


Description:
If the display only works incompletely on your vehicle or if it has stopped, then defective displays and / or their guide contacts are usually the cause. With this offer, you as a hobby diyer can easily and independently repair your instrument.
The set includes a puller for the speedometer needle and a T-soldering tip. This must be heated with a soldering iron, so that the display circuit foil can be ironed. There are no soldering necessary as this display is ironed.


Variants:
It is the left display in the instrument cluster. (See picture) We also have the other two displays in the program. The displays only fit Tachos with km / h scale!


Service:
We permanently have over 250 variants of display elements and their accessories in stock. So we can quickly provide you with replacement whenever needed. For many vehicles we also have illustrated repair manuals (in English) or links to repair videos, which we can send you on request.

Quality:
Thanks to many years of experience with our manufacturing partners and our own electronics development, we can offer excellent quality and one hundred percent true to original designs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6076

您正在查看的产品与这些编号存在交叉引用关系

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1154

您正在查看的产品与这些编号存在交叉引用关系

Removal tool injectors filter.



Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968


Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5167

您正在查看的产品与这些编号存在交叉引用关系

Assembly tool for oil cooler repairs.
Porsche ref no 0007219261.



Fits:
Porsche 924 S (from 08.87)
Porsche 944 2.5 / 2.7 / S / S2 / Turbo (from 08.87)
Porsche 968

The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.

Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1120

您正在查看的产品与这些编号存在交叉引用关系

Assembly tool for oil cooler repairs.
Porsche ref no 00072192150.



Fits:
Porsche 924 S (until 07.1987)
Porsche 944 2.5 / S / turbo (until 07.87)
= all models with old heat exchanger housing


The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.

Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1121

您正在查看的产品与这些编号存在交叉引用关系

Special key for timing belt replacement, 27mm.
Made in Germany



Fits:
Porsche 924S
Porsche 944
Porsche 968

Description:
The tool is for loosening and tightening the hard to reach running / tensioning rollers and allows a secure and defined tightening.

The tool has been specially developed for this application only and allows the correct replacement of the balance shaft belt and / or timing belt. The narrow design of the keyhole and the double offset offer the best possible accessibility to the key areas behind the rollers.

The key is 100% German produced. Material and component geometry were designed for the maximum load cases in this application. The corrosion protection is galvanic blue galvanizing.

Note:
Only an outdated 24mm wide version of the tool is available at Porsche although the manufacturers of the wheels are already adjusted to 27mm.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1130

您正在查看的产品与这些编号存在交叉引用关系