Powerflex
EPTG Ltd (European Polyurethane Technologies Group) was formed in the UK in 1996 to take advantage of the significant advances made in the development of polyurethane in recent years.
The company has wide experience in automotive suspension and chassis systems and combining these design skills with advanced polyurethane manufacturing techniques led to the development of a wide range of high performance, Porsche automotive polyurethane components now known the world over by the product name POWERFLEX.
The company operates in a self-contained state-of-the-art factory, manufacturing everything in-house.
Replacement motorsport lower arm centre polyurethane bushes.
Fits:
Front or Rear Arms
Porsche 986 Boxster 1994-04
Porsche 996 1998-04
Set of 2 for TWO lower arms which can be fitted either at the front & rear arms. Please note these parts should be fitted by an engineer.
Fits:
Rear Arms Only:
Porsche 987 Boxster 05>>
Porsche 987C Cayman 05>>
Porsche 997 05>>
Set of 2 for TWO lower arms which ONLY FITS REAR arms on 987 / 997 models. Please note these parts should be fitted by an engineer.
SET OF 2 for TWO lower arms front & back
Please note these parts should be fitted by an engineer.
Diagram ref:
no. 2 - front / no. 5 - rear
OEM Part Number: 996341053 / 996341941 / 997341041
OEM Part Number: 997341042 / 997341041
OEM Part Number: 997331053
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-502BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
OEM Part Number: 90134722303/1
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 24
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-405BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Size: 22mm
Replacement for Porsche parts No. 91134388100
SET OF 4
Fits:
Porsche 911 1984-86 3.2L and Turbo Front axle - Please choose by size
Porsche 911 1987-89 3.2L and Turbo Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 24
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-403-22BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Size: 20mm
Replacement for Porsche parts No. 91134379203
SET OF 4
Fits:
Porsche 911 1974-86 Front axle
Porsche 911 Turbo (930) 1975-86 Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-403-20BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
SET OF 4. Complete with metal inserts
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 34 and 35
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-402BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1986>>
Fits to No 10 on the diagram.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-303BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
每包数量: 4 个衬套、4 个垫圈、2 个锁紧螺母。
Powerflex 黑色系列- 专为赛道设计 - 随时准备比赛 - 力求做到最好。
Powerflex 黑色系列衬套采用 95 Shore A 复合材料制成,可最大程度地控制底盘几何形状。这种复合材料的抗负载能力比标准橡胶高出 80%,硬度比我们的紫色高性能材料高出 25%。
如果您的要求纯粹是极致的操控性和底盘性能,那么 Powerflex Black 系列是独一无二的,可为您的底盘提供最精确、最准确的定位。
使用聚氨酯悬架衬套替换您的汽车橡胶悬架衬套将为您带来:
- 更好的抓地力
- 恒定转向几何
- 延长轮胎寿命
- 转向更灵敏
- 悬架部件的使用寿命更长
适合:
保时捷 944 1985-91 全部前部
保时捷 968 1992-95 全部前部
单击“放大”显示装配图 - 参考编号 5、8、10。
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-210BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 25.5mm or 26.8mm anti roll bars. The bar diameter reduces at the end to 18mm where 95134379330PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1987-91 Turbo Front
Porsche 944 Turbo S 1988 Front
Porsche 968 1992-95 Front Cars with standard suspension not M030 cars
Please note price shown for Polyurethane bushes is for Quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-206BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 21mm or 23mm, anti roll bars. The bushes fit inside the drop link
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 924 1976-85
Please note price shown is for quantity 2.
Click 'Zoom in' to display fits inside diagram - Ref No 6.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-205-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 20mm, 21.5mm, 23mm & 24mm anti roll bars. The bar diameter reduces at the end to 16.45mm where 95134379300PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 944 1985-86 ALL Front
Porsche 944 1987-91 Front Cars with standard chassis (Not Turbo etc)
Please note price shown is for quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-205-16BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
FRONT
Quantity: 2
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 94434370630 or 94434370631 M030 anti roll bars. The bar diameter reduces at the end to 21mm where 95134379331PF fits.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Fits:
Porsche 968 1992-95 Front Cars with M030 cars
Please note price shown for Polyurethane bushes is for Quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-205BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
PowerFlex Front wishbone rear bush.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 968 1992-95
Fits to No 10 on the diagram.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-203BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Size: 22mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313E / PCG411313E
SET OF 2
Fits:
Porsche 924 1978 REAR AXLE
Porsche 964 Turbo (965) REAR AXLE
Click 'Zoom in' for large parts diagram.
Diagram Ref No 17.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-209-22BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 924 2.0L 1980-85
Size: 21mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313D /477411313M
Fits:
Porsche 911 1986-89 REAR AXLE
Porsche 964 C2 1989-94 REAR AXLE - Please choose by size
Porsche 993 Turbo REAR AXLE
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.
Pack of 2. Two bushes per car.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-209-21BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 964 (911) C2 1989-93
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Size: 20mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Reference to: 477411313C
Fits:
Porsche 911 SC 1974-83 Front axle
Porsche 911 TURBO 1985-88 Rear axle
Porsche 924 1976-77 Front axle
Porsche 924S 1986-88 Rear axle Cars with Sport Suspension
Porsche 944 1982-85 Front axle
Porsche 944 1985-88 Rear axle - Please choose by size
Porsche 964 1991-94 C2/C4 Rear axle Cars with manual transmission - Please choose by size
Porsche 993 C2S/C4S/RS Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' to see parts diagram.
Diagram Ref No 17.
Pack of 2. Two bushes per car.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-209-20BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 924 2.0L 1976-79
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
Size: 18mm anti-roll bar diameter
Quantity: 2 (2 per car)
Porsche Refference to: 477411313B
Fits:
Porsche 911 1978-85 Rear axle
Porsche 911 TURBO 1978-85 Rear axle
Porsche 911 TURBO 1989 Rear axle
Porsche 944 1985-91 Rear axle Please choose by size
Porsche 964 RS Rear axle
Porsche 964 C4 Rear axle Please choose by size
Porsche 968 Rear axle Cars with Sport Suspension & tiptronic transmission
Porsche 993 C2/C4 Rear axle Cars with standard suspension
Porsche 993 C2S/C4S Rear axle Cars with Sport Suspension - Please choose by size
Click 'Zoom in' for large parts diagram.
Diagram Ref No 11.
Pack of 2. Two bushes per car
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-209-18BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
Rear Alxe Carrier Outer Mounting Bush.
SET OF2. Replacement for Porsche parts No. 477501069A
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1986-91
Porsche 968 1992-95
Diagram Ref no 2.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-220BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 / 91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-401BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
PAIR
Fits:
Porsche 964 1989-94
Porsche 993 1994-98
Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-102BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
Set of 2 for both wishbones
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 944 1985-91 Alloy wishbone
Fits to No 2 on the diagram.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-101BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
SET OF 2 for both wishbones
Fits to Wishbone OEM Part Number: 96434101706 / 96434101707 / 96434101806
Fits to Wishbone OEM Part Number: 96434101807 / 96434101780 / 96434101782
Fits to Wishbone OEM Part Number: 96434101880 / 9643410182
Fits:
Porsche 964 1990-94
Porsche 993 1994-97
Click 'Zoom in' for large parts diagram.
Fits to No 12 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-101BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
SET OF 4 BUSHES (for both sides)
If you still have the original strut bushes on your 944/2 or 968 they will be worn causing rear geometry changes and stability issues. By fitting our new polyurethane bushes this will offer a solution plus improved stability.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
Fits:
Porsche 924 S
Porsche 944 1985 Onwards
Porsche 968 1992-95
Fits to No 22 on the diagram.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-223
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Front control arm outer bush comes with a lightweight aluminium adjustable sleeve allowing on-car caster adjustment, again in our unique polyurethane bushes.
Set of 2 for TWO lower arms.
Please note these parts should be fitted by an engineer.
Fits:
Porsche 987 Boxster 2006>>
Porsche 987C Cayman 2005>>
Porsche 997 2006>>
Please click 'Zoom in' to view the diagram.
Diagram re No 13.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-802
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Front control arm inner bush gives the camber adjustment with its durable stainless steel adjustable sleeve which runs in our unique grease retaining polyurethane bush.
Set of 2 for TWO lower arms.
Please note these parts should be fitted by an engineer.
Fits:
Porsche 987 Boxster 2006>>
Porsche 987C Cayman 2005>>
Porsche 997 2006>>
Please click 'Zoom in' to view the diagram.
Diagram re No 13.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-801
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 21mm or 23mm, anti roll bars. The bushes fit inside the drop link
Quantity: 2
Fits:
Porsche 924 1976-85
Please note price shown is for quantity 2.
Click 'Zoom in' to display fits inside diagram - Ref No 6.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-205-2
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
Fitting the front anti roll bar link rod to the end of the anti roll bar on models using 94434370630 or 94434370631 M030 anti roll bars. The bar diameter reduces at the end to 21mm where 95134379331PF fits.
Quantity: 2
Fits:
Porsche 968 1992-95 Front Cars with M030 cars
Please note price shown for Polyurethane bushes is for Quantity 2.
Click 'Zoom in' to display fitment diagram - Ref No 7.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-205
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
SET OF 4. Complete with metal inserts.
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 35
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-402
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits to spring plate OEM part number 90133300309
/ 90133300301.
SET OF 4
Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)
Fits to No. 16 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-409
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Replacement motorsport Upper Link Arm INNER Rear in polyurethane.
This kit contains a set of 4 bushes for upper rear link arms:
4 x PFR57509 INNER bushes
Please note these parts should be fitted by an engineer.
Fits:
Porsche 996 1998-04
Fits to No 8 on the diagram.
Please note:
On some early 997 models (pre 2006) there is no supporting lug on the upright to the outside faces of the outer bushes. For these models use 4 x PFR57-508 outer bush & 4 x PFR57-509 for the inner bush. For cars with lugs use 8 x PFR57-509.
OEM Part Number: Fits wishbone OE Nr 996331047 / 997331047
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-509
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Size: 22mm
This kit contains a set of 4 bushes for upper rear link arms:
4 x PFR57508 Outer bushes
Please note these parts should be fitted by an engineer.
Fits:
Porsche 996 1998-04
Fits to No 8 on the diagram.
PLEASE NOTE:
On some early 997 models (pre 2006) there is no supporting lug on the upright to the outside faces of the outer bushes. For these models use 4 x PFR57-508 outer bush & 4 x PFR57-509 for the inner bush. For cars with lugs use 8 x PFR57-509. PFR57-508 fits 22mm width arms, for 19.5mm width arms please use PFR57-1508.
OEM Part Number: Fits wishbone OE Nr 996331047 / 997331047
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-508
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 MKII GT3 2010>>
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.
SET OF 4
Replacement for Porsche parts No. 91133379302
Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear
Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-412-18
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1975-1977 3.0L Turbo (930)
Size: 22mm
SET OF 4
Replacement for Porsche parts No. 91134388100
Fits:
Porsche 911 1984-86 3.2L and Turbo Front axle - Please choose by size
Porsche 911 1987-89 3.2L and Turbo Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 24
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-403-22
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Size: 16mm
SET OF 4
Fits:
Porsche 911 1974-77
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-403-16
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
Size: 20mm
Replacement for Porsche parts No. 91134379203
SET OF 4
Fits:
Porsche 911 1974-86 Front axle
Porsche 911 Turbo (930) 1975-86 Front axle
Click 'Zoom in' for large parts diagram.
Diagram Ref No 23.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-403-20
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
OEM Part Number: 90134722303/1
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 24
Powerflex. Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-405
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Set of 2 bushes which will fit 2 Engine mounts
Fits inside the Mounts of:
Porsche 911 1965-69 Engine Mount
Porsche 911 1970-86 Engine & 915 Gearbox Mount
Porsche 911 1986-89 Engine Mount
Porsche 930 1975-77 Engine Mount
Porsche 930 1978-89 Engine Mount
(not CS, not Cabrio)
Please note the price does not include mounts
Fits to No.8 on the diagram
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-415
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-411
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
SET OF 4 for 2 Arms.
OEM Part Number: 90133105900
Fits:
Porsche 911 1970-89
Click 'Zoom in' for large parts diagram.
Diagram Ref No 3
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-410
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 /91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFF57-401
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
SET OF 2
Replacement for Porsche parts No. 477501541
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Fits:
Porsche 924 1976-88
Porsche 944 1982-91
Porsche 968 1992-95
Fits into the end of Diagram Ref no 4.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-222
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 924 2.0L 1976-79
- Porsche 924 2.0L 1980-85
- Porsche 924 Turbo 2.0L 1979-81
- Porsche 924 Turbo 2.0L 1982-84
- Porsche 924 Carrera GT 2.0L 1981
- Porsche 924 Carrera GTS 2.0L 1982
- Porsche 924S 2.5L 1986-87
- Porsche 924S 2.5L 1988
- Porsche 944 2.5L 8V 1982-87
- Porsche 944 2.7L 8V 1988-89
- Porsche 944S 2.5L 16V 1987-88
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988>>
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94