Retro Line

杯子/饮料架。侧面安装

#复古线#

适合
保时捷 992 - 2019 年起

我很喜欢折叠式杯架，但如果您在车内喝过饮料，那么您就会知道饮料会移动并溅到您的 HVAC 按钮上。这通常会使您的风扇/温度控制变得粘滞，有时甚至无响应。随着 992 911 2020+ 内饰更新，一些汽车的中控台上有一个杯架，所有以前的 911 和当前的 Cayman 上都有一个小烟灰缸或小柜子。这是一款定制的杯架，可利用车内未使用的空间，并为您的所有其他品牌和型号的体验增添额外的便利。从视觉上看，我们的目标是提供一款在增加功能的同时不偏离汽车 OEM 外观的产品。

包装清单： 1 个杯架。 1x 皮革包裹侧支架。 1x Kup 支架。缎黑色。即插即用。安装时间 5-15 分钟。

即插即用：最少甚至无需工具。将侧支架滑入。它将滑入到位，您会感觉到它落入侧盖后面的铸件中。将 Kup 支架拧在一起。将 Kup 安装到支架上。

笔记
这些是 3D 打印零件。某些表面上会有支撑痕迹和小/轻微瑕疵。我们会尽最大努力处理这些，以匹配 OEM 的外观和感觉。上面的图片正是您所期望的。

Flat Version
Silver finish badge. Like the one fitted to Porsche 356.

Very Popular product which can be used to stick on dash board and other interior parts

Size: SMALL 356 Size 30mm X 40mm

Last One Available

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90155921098S

您正在查看的产品与这些编号存在交叉引用关系

Zenith 32 NDIX carburetor kit for 356A(T2), B,C (1956-65) with accelerator pump plunger included. One needed per carburetor.



FITS:
Porsche 356A(T2), B,C (1956-65)



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610890201

您正在查看的产品与这些编号存在交叉引用关系

Rust repair rear 1/4 panel arches Porsche 996 C4S / 996 Turbo 

The problem!   Porsche 996 rear wing and inner arch have a double skin join at the outer lips and this is where the rust is occurring. Once they start bubbling on the outside then its most likely a cut out and replace job for theses sections. At the complete rear wings are hard to find Design911 have come up with a less expensive solution by suppling just the rear replacement arches and side sill panels. 

Fits: 

• Porsche 996 C4S Widebody body
• Porsche 996 Turbo Widebody body 

Click picture for large parts diagram.
Diagram ref no 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99650396030

您正在查看的产品与这些编号存在交叉引用关系

Alloy Door Handles in Black finish with etched 911 logo - PAIR 



Replace the plastic cheap looking black door handles with our new alloy door handles, easy to fit and easy to keep clean.

Fits:
Porsche 911 1974-89
Porsche 964 1990-94
Porsche 993 1994-97

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911680DH950

您正在查看的产品与这些编号存在交叉引用关系

Gear lever knob 5-speed.



Fits:
Porsche 911 Carrera 3.2L 1987-89

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911680GG911

您正在查看的产品与这些编号存在交叉引用关系

RS Style inner door handle pull straps. Easy to install they simple slot and glue behind the original metal door handle 

Fits:

Porsche 986

Porsche 996

Available in red, yellow, blue, silver or black.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

RSDOORPULL

您正在查看的产品与这些编号存在交叉引用关系

Rust repair panels for side sills to rear 1/4 panels Porsche 996 

The problem!   Porsche 996 rear wing and inner arch have a double skin join at the outer lips and this is where the rust is occurring. Once they start bubbling on the outside then its most likely a cut out and replace job for theses sections. At the complete rear wings are hard to find Design911 have come up with a less expensive solution by suppling just the rear replacement side sill panels and arches (sold separately). 

Fits: Porsche 996 C2 / C4 Standard body 

Click picture for large parts diagram.
Diagram ref no 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99650396020

您正在查看的产品与这些编号存在交叉引用关系

Rust repair rear 1/4 panel arches Porsche 996

The problem!   Porsche 996 rear wing and inner arch have a double skin join at the outer lips and this is where the rust is occurring. Once they start bubbling on the outside then its most likely a cut out and replace job for theses sections. At the complete rear wings are hard to find Design911 have come up with a less expensive solution by suppling just the rear replacement arches and side sill panels. 

Fits: Porsche 996 C2 / C4 Standard body 

Click picture for large parts diagram.
Diagram ref no 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99650396010

您正在查看的产品与这些编号存在交叉引用关系

Centre console MagSafe phone charger. 



Fits
Porsche 992 - All

Package Includes: 1x Magsafe Insert. Satin Black Magsafe. Plug and play. 5 min installation time.

MagSafe: MagSafe Magnetic Charger with USB C end (USB A adaptor included)

Phone Fitment for CHARGING: iphone 14,iphone 14 plus, iphone 14 pro max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max or iPhone 13 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max or iPhone 12 mini, AirPods 3, AirPods 2, AirPods Pro, and Mag-Safe Charger-adapted cases, Samsung or Google Pixel phone. Any phones that have Magnetic wireless charging. 

Fitment: 2020 - 2024 Porsche 911 992. No cutting or modification to the car is required. 

Fits the 911 992 in all trims/packages. 
This will replace your cubby or cupholder insert. (see our 991 Side Kup for a great cup holder solution for the 992)

Rear roll bar seal for Porsche Targa models.



Fits:
Porsche 911 1965-69

Click 'Zoom in' for large parts diagram.
Diagram Ref: 41

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90156509140

您正在查看的产品与这些编号存在交叉引用关系

Centre console MagSafe phone charger. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

What's the deal: I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to mimic the location of the 992 cupholder and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black Magsafe. Plug and play. 5 min install time.
MagSafe: MagSafe Magnetic Charger with USB C end

Phone Fitment for HOLDING ONLY:  Don't have wireless charging or don't want to charge? This setup will include a super thin metal stick-on ring with 3M tape backing that simply attaches to your phone or case to allow you to attach your phone to the magnetic mount.

Phone Fitment for CHARGING: iphone 14,iphone 14 plus,iphone 14 pro max,iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max or iPhone 13 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max or iPhone 12 mini,AirPods 3, AirPods 2, AirPods Pro, and Mag-Safe Charger-adapted cases, Samsung or Google Pixel phone. Any phones that have Magnetic wireless charging. 

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray insert in front of the armrest. Will NOT fit in the smokers package cubby.

Fuel pump wiring harness loom.



Fits:
Porsche 911 / 911 S / 911 Carrera 3.0ltr - 1977
Porsche 911 SC - 1978 to 1983

Complete fuel pump harness including relay socket, Weco connectors and Bosch rubber boots for the fuel pump connection.

Fuel pump relay included

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161207214

您正在查看的产品与这些编号存在交叉引用关系

Electric window power supply wiring harness loom.



Fits:
Porsche 911 - 1969 to 1975

Power supply harness.
This harness in installed in the trunk and supplies both doors, it has a round female 6 pole connector on the left and right.

It is connected to the front fusebox and ground studs (8mm eyelet) on both sides.

Other side of this harness needs to be connected to the terminal strip inside the door.

Handmade to concourse quality.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161207102

您正在查看的产品与这些编号存在交叉引用关系

Tunnel wiring harness loom.



Fits:
Porsche 911 - 1972 to 1973

Complete tunnel harness with original colour coded wiring.

Runs from front fusebox / gauges through tunnel to the engine bay.

Harness will exactly fit like the original.

Wire tube and oil resistant tape as original and the terminals have rubber sleeves.

Harness comes with detailed connection instructions.

2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) rubber sleeve and grommet included.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116120

您正在查看的产品与这些编号存在交叉引用关系

Tunnel wiring harness loom.



Fits:
Porsche 911 - 1971

Complete tunnel harness with original colour coded wiring.

Runs from front fusebox / gauges through tunnel to the engine bay.

Harness will exactly fit like the original.

Wire tube and oil resistant tape as original and the terminals have rubber sleeves.

Harness comes with detailed connection instructions.

2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) , rubber sleeve and grommet included.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116120

您正在查看的产品与这些编号存在交叉引用关系

Rear fuse panel wiring harness loom.



Fits:
Porsche 911 - 1970

Available for Bosch or Motorola Regulators

Complete engine fuse panel harness.

Mounted on fuse panel frame with original colour coded wiring.

Harness will exactly fit like the original with wire tube and oil resistant tape as original.

Terminals have rubber sleeves and harness comes with detailed connection instructions.

With new 2 x 14 pole male connectors, relay socket, 2 pole female connector.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161200

您正在查看的产品与这些编号存在交叉引用关系

Trunk light wiring harness loom.



Fits:
Porsche 911/ 912 - 1965 to 1974

Harness in front trunk, connects on left side in trunk to main harness (for double lamps in hood)

As original colored wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161204200

您正在查看的产品与这些编号存在交叉引用关系

Electric window wiring harness loom.



Fits:
Porsche 911 - 1969 to 1973

Wire harness for power windows (this loom is mounted in the door) and connects to the power supply harness by a 6 pole male connector.

Other side of this harness needs to be connected to the terminal strip inside the door.

One loom required for each door

Handmade to concourse quality.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161207103

您正在查看的产品与这些编号存在交叉引用关系

Interior light wiring harness loom - Targa



Fits:
Porsche 911 - 1969 to 1986 Targa Only

Harness for interior lights (Targa version)

Connects to main harness on right side under window.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90161203541

您正在查看的产品与这些编号存在交叉引用关系

Front fog light wiring harness loom.



Fits:
Porsche 911 - 1969 to 1973

Complete harness for front fog-lights with original spiral colour coded wiring.

Harness will exactly fit like the original.

Wire tube and oil resistant tape as original and the terminals have rubber sleeves.

Relay included.

Harness comes with detailed connection instructions.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161202700

您正在查看的产品与这些编号存在交叉引用关系

Luggage compartment wiring harness loom.



Fits:
Porsche 911 - 1971 to 1973

Complete main harness with original colour coded wiring.

Runs from front fusebox to dashboard and harness will exactly fit like the original.
Wire tube and oil resistant tape are as original and terminals have rubber sleeves.

Harness comes with detailed connection instructions.

• 2 x Single bulb holder for headlight signal lights included.
• Fuel pump connector, boot and cable entry grommet included.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116120

您正在查看的产品与这些编号存在交叉引用关系

Luggage compartment wiring harness loom.



Fits:
Porsche 911 - 1970

Complete main harness with original colour coded wiring.

Shown fuseboxes are not included

Runs from front fusebox to dashboard and harness will exactly fit like the original.
Wire tube and oil resistant tape are as original and terminals have rubber sleeves.

Harness comes with detailed connection instructions.

• 2 x Single bulb holder for headlight signal lights included.
• Fuel pump connector, boot and cable entry grommet included.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116120

您正在查看的产品与这些编号存在交叉引用关系

Engine bay lamp wiring harness loom.



Fits:
Porsche 911 1974 to 1989

Harness from left rear light (tunnel harness) to engine bay light in engine lid & ground.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161204900

您正在查看的产品与这些编号存在交叉引用关系

发动机线束织机。

#复古线#

适合：
保时捷 911 SC 1978 年至 1983 年

完整的发动机线束。

从隧道线束连接到 14 极公连接器，并具有原始颜色编码接线。

线束将与原装完全相同，线管和耐油胶带也与原装一样。

端子具有氯丁橡胶套管，带有新型 14 极母连接器和橡胶电缆入口块、交流发电机索环、交流发电机连接上的橡胶套、CDI 连接器和保护套、绿色屏蔽配电线/插头等。

1978 至 1981版本适用于具有外部稳压器的早期 SC 型号。
1983-1983版本适用于后来的 SC 型号，具有内置稳压器。

线束附带我们详细的连接图。

特殊订单需订购零件，请允许 2 – 4 周

手工制作，达到大厅品质。

单击“放大”查看大零件图。
图表参考号 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911607016

您正在查看的产品与这些编号存在交叉引用关系

Tunnel wiring harness loom.



Fits:
Porsche 930 turbo - 1978 to 1983 Left Hand Drive (LHD)

Complete 911 tunnel harness with original spiral colour coded wiring.

Runs from front fusebox / gauges through tunnel to the engine bay.

Harness will exactly fit like the original.

Wire tube, and oil resistant tape as original.
The terminals have rubber sleeves.

Harness comes with detailed connection instructions.

Two new 6 pole male connector , 1 x 14 pole male connector and 1 x relay socket , rubber sleeve and grommet included.

As original colored wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93061200106

您正在查看的产品与这些编号存在交叉引用关系

Luggage compartment wiring harness loom



Fits:
Porsche 911 SC - 1978 to 1984

Complete main harness with original colour coded wiring. Runs from the front fusebox to dashboard.
This harness will exactly fit like the original and the wire tube, oil resistant tape are as original.
Terminals have rubber sleeves.

Harness comes with detailed connection instructions.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink tube!)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9116120

您正在查看的产品与这些编号存在交叉引用关系

Rear fuel pump wiring harness loom.



Fits:
Porsche 911 - 1971 to 1973

Fuel pump harness (rear)

"T" connector and fuel pump connector + correct rubber fuel pump boot.

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 24

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161207210

您正在查看的产品与这些编号存在交叉引用关系

Air conditioning thermo switch wiring harness loom - Left Hand Drive (LHD)



Fits:
Porsche 911 - 1978 to 1989
Porsche 911 turbo - 1978 to 1989

Wiring Harness Nr. 29
Thermo Bi-metal Switch - Left hand Drive

Model: M559 - 1978-1989, Air conditioner

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161202901

您正在查看的产品与这些编号存在交叉引用关系

Air conditioning relay wiring harness loom.



Fits:
Porsche 911 - 1974 to 1984
Porsche 911 turbo - 1974 to 1984

Loom - NR 80

Complete harness from fusebox to relay socket (AC control relay) and 2 pole female connector.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

High quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

The high flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161208001

您正在查看的产品与这些编号存在交叉引用关系

Air conditionong wiring harness loom.



Fits:
Porsche 911 - 1974 to 1984
Porsche 911 turbo - 1974 to 1984

Loom - NR 78

Complete harness from fusebox to AC control relay and 6 pole female connector.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink wrap)

High quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

The high flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161207801

您正在查看的产品与这些编号存在交叉引用关系

Ignition switch wiring harness loom.



Fits:
Porsche 911 - 1987 to 1989
Porsche 911 turbo - 1987 to 1989

Harness with 6 pole male connector that connects to ignition switch and comes with original colour coded wiring.

Harness will fit exactly like the original with the wire tube and oil resistant tape as original.

Terminals have rubber sleeves.

Harness comes with detailed connection instructions.

2 x Bulb holder to re-used from old harness

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161201135

您正在查看的产品与这些编号存在交叉引用关系

Ignition switch wiring harness loom.



Fits:
Porsche 911 - 1985 to 1986
Porsche 911 turbo - 1985 to 1986

Harness with 6 pole male connector that connects to ignition switch and comes with original colour coded wiring.

** Ignition switch harness two bulb holders are NLA and need to be re-used from the original.  

You will need to send us the original harness for this.
The reason for requiring the donor harness is that some of the unique components required to manufacture a new harness are no longer available, or no longer being reproduced.
Harness will fit exactly like the original with the wire tube and oil resistant tape as original.

Terminals have rubber sleeves.

Harness comes with detailed connection instructions.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161201134

您正在查看的产品与这些编号存在交叉引用关系

Ignition switch wiring harness loom.



Fits:
Porsche 911 - 1976 to 1984
Porsche 911 turbo - 1976 to 1984 (including)

Harness with 6 pole male connector that connects to ignition switch and comes with original colour coded wiring.

Harness will fit exactly like the original with the wire tube and oil resistant tape as original.

Terminals have rubber sleeves.

Harness comes with detailed connection instructions.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161201132

您正在查看的产品与这些编号存在交叉引用关系

Heated and electric seat wiring harness loom.



Fits:
Porsche 911 3.2 Carrera - 1987 to 1989
Porsche 911 turbo - 1987 to 1989

Harness for both heated and electrically adjustable front seats.

2 x 8 POLE connectors. (Driver & Passenger seat)

Comes with detailed connection diagram.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161252102

您正在查看的产品与这些编号存在交叉引用关系

Fuel pump wiring harness loom.



Fits:
Porsche 911 3.2 Carrera - 1984 to 1986

Fuel pump harness from the fusebox to front fuel pump.

Grommets and fuel pump connection boots included.

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161207215

您正在查看的产品与这些编号存在交叉引用关系

Tunnel heater panel wiring harness loom.



Fits:
Porsche 911 - 1975 to 1986

Harness for center heater control panel (between front seats)

Harness goes from the fusebox (& ground) through the tunnel towards the heater control unit.

Comes with the right female pins but the connector housing needs to be re-used (NLA)

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

911612152

您正在查看的产品与这些编号存在交叉引用关系

Luggage compartment wiring harness loom - Left Hand Drive (LHD)



Fits:
Porsche 911 3.2 Carrera - 1984 Left Hand Drive (LHD)

Complete main harness with original colour coded wiring. Runs from the front fusebox to dashboard.
This harness will exactly fit like the original and the wire tube, oil resistant tape are as original.
Terminals have rubber sleeves.

Harness comes with detailed connection instructions.

As original coloured wiring.

Original neoprene terminal sleeves used, (no shrink tube!)

Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53

Gasoline, oil, battery acid, engine coolant resistant.

High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161200215

您正在查看的产品与这些编号存在交叉引用关系

DME wiring harness loom.



Fits:
Porsche 911 3.2 Carrera - 1984 to 1985

DME harness for Carrera 3.2

Complete harness with 35PIN ECU/DME connector to Motronic Box

• Female connector to injector harness (chassis part is NLA and needs to be re-used from your old harness)

Connectors for:
• Cylinder head temp sensor
• Reference mark sensor
• Speed sensor
• Oxygen sensor
• Test connector
• Air flow sensor
• Idle speed positioner
• Idle speed switch
• Throttle valve switch
• RPM signal/Shift light
• Altitude sensor

Comes with detailed connection diagram.

Special order made to order parts please allow 2 – 4 weeks

Handmade to concourse quality.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1A

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91161217307

您正在查看的产品与这些编号存在交叉引用关系