Brake Disc Type: Vented, Perforated,
Porsche 991.2 3.0L Non S models FRONT
Porsche 992.1 C2 / C4 Non S models FRONT
Porsche 718 Cayman S / GTS 2.5L 2017>> FRONT
Porsche 718 Boxster S / GTS 2.5L 2017>> FRONT
Increased strength thanks to the greater proportion of carbon in the product
Optimised brake reaction: Brake judder is minimised due to reduced disc distortion
More even heat distribution due to better thermal conductivity
Higher thermal load capacity
Benefits:
Reduction in braking noise (less susceptible to screeching)
Corrosion protection
Improved visual appearance of the brake discs, e.g. when used with alloy wheels
Reduced assembly time: No removal of protective oil necessary
Time saving thanks to assembly aid, in future fixing screws included
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
9P161530
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
• brake, clutch and gear components
• starter motors and alternators
• carburetors, fuel pumps and engine components
• glass and metal surfaces before gluing
The advantages of Textar brake cleaner:
• does not destroy polystyrene
• does not contain any chlorinated solvents
• is listed with the German Federal Ministry for the EnvironmentHow to use:
Spray a thick coating on the parts to be cleaned. Allow the solvent to drip and/or evaporate. Repeat if necessary.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
96000100
您正在查看的产品与这些编号存在交叉引用关系
库存
For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
