Flywheel / Torque

Speedi Sleeve for Flywheel End Sealing Surface.



Fits: Crankshaft Flywheel Hub End

Fits:
Porsche 356 1950-65
Porsche 912 1965-69

Speedi Sleeves to Repair Worn, Grooved Seal Surfaces

Over time, sealing surfaces will become grooved, making a good seal impossible.The most economical and fastest method of shaft repair is to install the CR Speedi Sleeve. Speedi Sleeve is a precision engineered piece of stainless steel. It's ultra-thin wall design allows it to be used without changing the sel size ans its finish is perfect for lip sealing applications. Speedi Sleeve is built with removable installation flange. The installation tool included in every box allows the seal to be put in. This avoids the possibility of distortion from heat or other installation methods

Dowel Pin For Flywheel. Sold as EACH. 8 required per engine.



Fits:
Porsche 912
Porsche 356

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90010900400

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Gasket.



Fits:
Porsche 356 (not for CARRERA)
Porsche 912 1965-69

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

50202301

您正在查看的产品与这些编号存在交叉引用关系

Flywheel HD gland nut.



Thread count 1.5mm

Fits:
Porsche 356
Porsche 912

Machined from 4140 steel and tested to 700 lb-ft of torque (Porsche factory recommended torque is 400-450 lb-ft).  Fits all 356 and 912 engines.

Note: Each time the gland nut is removed, it must be replaced with a new one.

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610202501

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Porsche 356B 1600 C / SC 1960-63
Size: 200mm



Fits:
Porsche 356B 1600 C / SC
Porsche 356C

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610220104

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Porsche 356B SUPER 90 1960-63
Size: 200mm



Fits:
Porsche 356B SUPER 90 1960-63

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

61610220102

您正在查看的产品与这些编号存在交叉引用关系

Flywheel Spacer.



Use only one flywheel spacer to achieve proper crankshaft end play

Fits:
Porsche 356 (not for Super 90)
Porsche 912 1965-69

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

36902107

您正在查看的产品与这些编号存在交叉引用关系

Flywheel.
Size: 180mm



Fits:
Porsche 356 / 356A / 356B

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

50210211601

您正在查看的产品与这些编号存在交叉引用关系

这是一款全新 12V 飞轮 200mm 转换飞轮，可将保时捷 356、912 和 36HP 大众发动机安装到后期大众变速箱中。

#复古表演#

适合：保时捷 356 / 912

它的深度为 20.5 毫米，专为 200 毫米大众离合器而设计，具有经过热处理的 12 伏大众齿圈。

重量：12磅
离合器深度：20.5mm
牙齿数量：130

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200F12VW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications, 180 mm.

Fits: For early 356

All flywheels are drilled for 8 dowel pins (SPG Pattern). Features a heat treated ring gear.

Weight: 14LB
Clutch Depth: 24mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008180FW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications. Works with all 200mm VW Type 1 Clutches.



Fits: for Porsche 356

All flywheels are drilled for 8 dowel pins(SPG Pattern). Features a heat treated ring gear.

Weight: 12LB
Clutch Depth: 20.5mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200FVW

您正在查看的产品与这些编号存在交叉引用关系

This a brand new forged chromoly flywheel it is manufactured to exact specifications.
Works with OEM Porsche 200mm clutch.



Fits: for Porsche 356

All flywheels are drilled for 8 dowel pins (SPG Pattern). Features a heat treated ring gear.

Weight: 13LB
Clutch Depth: 25mm

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008200FW

您正在查看的产品与这些编号存在交叉引用关系

Lock washer for bolting the flywheel to the crankshaft.



Fits:
Porsche 356 (1950 to 1965)
Porsche 911 and 912 (1965 to 1969)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

53902103

您正在查看的产品与这些编号存在交叉引用关系