Flywheel / Torque

Clutch flywheel with starter ring Light weight. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

Lightweight Flywheel with starter ring for Porsche 911 65 - 69

The flywheel with starter ring is an important component in the drive system of a vehicle, including the Porsche 911 from 1965 to 1969. This component has a crucial function in starting the engine.

The flywheel is a round plate that is connected to the crankshaft bearing. It serves as a support for the starter ring, which in turn is connected to the vehicle's starter motor. The starter ring consists of a series of teeth or cams that allow it to mesh with the starter motor. When the driver turns the ignition key, the starter motor is activated and engages the starter ring to turn the crankshaft and start the engine.

The flywheel with starter ring for Porsche 911 from 1965 to 1969 is specially designed and manufactured for these model years. It is made of high quality material to ensure reliable performance and durability. The starter ring is precision manufactured to provide a secure and smooth connection with the starter motor.

When servicing or repairing the drive system of a 1965 to 1969 Porsche 911, it may be necessary to inspect or replace the flywheel with starter ring. Damage or signs of wear can impair the performance of the starter or lead to starting problems. In such cases, it is advisable to replace the defective component with a high-quality spare part to restore optimum engine function.

The flywheel with starter ring is an important element for the smooth starting of the engine of a Porsche 911 from 1965 to 1969. By regular maintenance and the use of high-quality spare parts, car owners can ensure the reliability of their vehicle and improve the driving experience.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

Clutch flywheel with starter ring. Porsche 911 1965-68 / 914-6 70-76
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

Flywheel.
6 Bolt type 215mm



Fits:
Porsche 911 2.0L 1965-69 (not for 912)
Note: early 911's might need to change the starter motor to later type (part number 901604102DX)

Porsche 914 1970-76 (6 cylinder only 914-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90110202602

您正在查看的产品与这些编号存在交叉引用关系

This a brand new, forged chromoly stock replacement flywheel.


Fits: for 215 Porsche 914

It is manufactured to exact specifications. Features a heat treated 12V ring gear.
Weight: 18LB

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

008215FW

您正在查看的产品与这些编号存在交叉引用关系

Flywheel needle bearing.



Fits:
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

111105313A

您正在查看的产品与这些编号存在交叉引用关系

Flywheel needle bearing.



Fits:
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

111105313A

您正在查看的产品与这些编号存在交叉引用关系

Flywheel, 215mm.
Forged Chromoly Lightweight



Fits:
Porsche 914 70-76

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

022105273A

您正在查看的产品与这些编号存在交叉引用关系

Rear main oil seal.
Inner Diameter: 32 mm, Outer diameter: 47 mm, Width: 10 mm.



Crankshaft Seal: Rear, Type 4, 914 & Waterboxer

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

029105245B

您正在查看的产品与这些编号存在交叉引用关系

Sportomatic Gearbox Shaft Sealing Ring.



Fits:
Porsche 911 1965-83
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99911318940

您正在查看的产品与这些编号存在交叉引用关系