CV Joints Kits

CV joint Constant Velocity Joint

Fitting Position Transmission End
Joint Type CV Joint
Drive Shaft without ABS ring
Length [mm] 40 mm
Int. teeth, diff.side, conn.to transm. 28
Outer diameter [mm] 108 mm

Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203400

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133292301

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.
Internal Teeth, wheel side 28
Seal Diameter [mm] 108 mm



Fits:
Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133292301

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.
Internal Teeth, wheel side 28
Seal Diameter [mm] 108 mm



Fits:
Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133292301

您正在查看的产品与这些编号存在交叉引用关系

The CV joint (Constant Velocity Joint).



Fits:
Porsche 911 2.7/3.0L 1974-84
6 Bolt driveshaft type

Tooth Gaps, profile shaft conn.: 25,
without groove in internal component,
D1: 25.84 mm,
Joint Ø: 100 mm,
Length: 32 mm, with cap,
Bore Ø: 8.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 86 mm,

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203200

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

Specification:
Disc Joint,
Tooth Gaps, profile shaft conn.: 28,
without groove in internal component,
Joint Ø: 108 mm,
Length: 40 mm,
Bore Ø: 10.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 94 mm,
with rubber bellow,


The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203400

您正在查看的产品与这些编号存在交叉引用关系

CV joint kit Constant Velocity Joint
Internal Teeth, wheel side 28
Seal Diameter [mm] 108 mm



Fits:
Porsche 911 TURBO (930) 3.0L 1975-77
Porsche 911 TURBO (930) 3.3L 1978-89

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203400

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft joint tab washer.



Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95

Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133219100

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft joint tab washer.
For M10 CV Bolts



Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95

Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133219100

您正在查看的产品与这些编号存在交叉引用关系