Power Steering Conversion

Power steering conversion kit.

Fits:
Porsche 911 1967-73 LHD Cars
For cars WITHOUT heater or A/C unit in the smugglers box

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

Speed sensitive power steering is operated via a mechanical speed sensor fitted between the speedo cable and speedo-head that is supplied in the kit.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

Please note: Special Order Product allow 3 - 4 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EZPSKITLHDFNOAC

您正在查看的产品与这些编号存在交叉引用关系

Power steering conversion kit.

Fits:
Porsche 911 1967-73 RHD Cars
For cars WITHOUT heater or A/C unit in the smugglers box

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

Speed sensitive power steering is operated via a mechanical speed sensor fitted between the speedo cable and speedo-head that is supplied in the kit.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

Please note: Special Order Product allow 3 - 4 weeks for delivery

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EZPSKITRHDFNOAC

您正在查看的产品与这些编号存在交叉引用关系

Power steering conversion kit. For cars with and without air conditioning.

*** Special Order Product allow 10 - 14 Days for delivery ***

Fits:
Porsche 911 74-89 LHD

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

For installation instructions:
– cars WITH air conditioning CLICK HERE
– cars WITHOUT air conditioning CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EZPSKITLHD

您正在查看的产品与这些编号存在交叉引用关系

Power steering conversion kit. For cars with and without air conditioning.

** Special Order Product allow 10 - 14 Days for delivery **

Fits:
Porsche 911 74-89 RHD fits cars with and without air conditioning

Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.

It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.

You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.

If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

For installation instructions please CLICK HERE

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EZPSKITRHD

您正在查看的产品与这些编号存在交叉引用关系

Power steering conversion torque limiter.

** Special Order Product allow 10 - 14 Days for delivery **

Fits:
Porsche 911 67-89 LHD without air conditioning

Have you fitted an EZ Power Power Steering conversion kit but find the steering a little light and would like a little less assistance?

You can connect the blue speed sensor wire to the speedometer as this will reduce the assistance when you drive faster.

If this has been connected and you find still find the steering too light, you can fit this "plug and play" torque limiter between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

This can also be used to recalibrate the steering centre position.

The torque limiter works with the use of a potentiometer to weaken the torque signal from the sensor so can be adjusted to the preferred level of assistance.

Download the detailed installation instructions

Power steering conversion torque limiter.

** Special Order Product allow 10 - 14 Days for delivery **

Fits:
Porsche 911 67-89 RHD with and without air conditioning
Porsche 911 67-89 LHD without air conditioning

Have you fitted an EZ Power Power Steering conversion kit but find the steering a little light and would like a little less assistance?

You can connect the blue speed sensor wire to the speedometer as this will reduce the assistance when you drive faster.

If this has been connected and you find still find the steering too light, you can fit this "plug and play" torque limiter between the torsion sensor and the ECU which will allow you to  adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.

This can also be used to recalibrate the steering centre position.

The torque limiter works with the use of a potentiometer to weaken the torque signal from the sensor so can be adjusted to the preferred level of assistance.

Download the detailed installation instructions