Driveshafts & Parts

Ball Joint Lock Washer. M8. Rear Axle.



Fits:
Porsche 911 1965-68
Porsche 912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99952310203

您正在查看的产品与这些编号存在交叉引用关系

Ball Joint Lock Washer. M10. Rear Axle.


Fits:
Porsche 911 1969-73
Porsche 912 1969

Click 'Zoom in' for large parts diagram.
Diagram ref no 20

Price is for each bolt.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99952310301

您正在查看的产品与这些编号存在交叉引用关系

Machined in house from 4340 steel and heat treated.

For all 930 4 speed applications and 1978 and later 915.

Spacers are required if you are using with a factory LSD.

Replaces part 930-332-209-12

Sold in pairs.

Notes:
Factory LSD applications will require spacers, otherwise the flanges will be too short.

Designed for use with metal CV gaskets, not paper.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033223200

您正在查看的产品与这些编号存在交叉引用关系

CV boot clamp plate. For M8 CV Bolts.



Fits:
Porsche 911 1965-69
Porsche 912 1965-69
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133219100

您正在查看的产品与这些编号存在交叉引用关系

传动轴螺栓 保时捷 911 / 964 / 986 / 993 / 996 M8 X 50

#保时捷#

适合：
保时捷 911 1978-83手动车（非涡轮增压）每辆车 24 辆
保时捷 911 1984（不适用于 Turbo 和 Turbo 外观）每辆车 24
保时捷 964 C4前后
保时捷 993 C4 / C4S前部
保时捷 986 Boxster 1997-02 2.5L / 2.7L
保时捷 996 1997-05 C4前部

价格为每个螺栓的价格。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90006721102

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Bolt. M10 X 48
 

Fits:
Porsche 911 1969-73
Porsche 911 1974-83 SPORTOMATIC CARS only
Porsche 986 Boxster S 3.2L 2003-04
Porsche 987 Boxster 2005>> 6-speed Manual cars
Porsche 987C Cayman 2005>> 6-speed Manual cars
Porsche 996 2002-05 Manual cars REAR
Porsche 997 MKI 2005-08 Manual cars REAR
Porsche 997 MKII 2009-12 Manual cars REAR

Price is for each bolt.

Driveshaft bolt
Price is for each bolt.



Fits:
Porsche 911 1984-89 Turbo & Turbo look
Porsche 964 C2 / RS / Turbo 1989-93
Porsche 928 1978-95 (all models)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90006712301

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft bolt.



Fits:
Porsche 911 1978-89 Turbo 24 per car

Price is for each bolt.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90006711801

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Circlip. Rear Axle.



Fits:
Porsche 911 1965-77
Porsche 912 1965-69

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Price is for EACH.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99904101201

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Circle. S 10 X 20. Rear Axle.



Fits:
Porsche 911 1969-83
Porsche 912 1969
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 15

Price is for EACH.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99909501900

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft end cap.



Fits:
 Porsche 911 Carrera 1970-83

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133229503

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft flange. Porsche 911 68-73



Fits:
Porsche 911 2.0-2.7 08/68-07/73

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133223200

您正在查看的产品与这些编号存在交叉引用关系

Replacement driveshaft. Brand new unit.



Fits:
Porsche 911 1969-73 Manual cars

Price is for each driveshaft. Fits left or right side

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133203309

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Gasket.



Fits:
Porsche 911 1974-86

Price is for each gasket.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333229700

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Gasket.



Fits:
Porsche 911 (930) 1974-89

Click 'Zoom in' for large parts diagram.
Diagram ref no 19.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033229700

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft gasket. Sold each.



Fits:
Porsche 911 1969-73 / 912 1969
Porsche 911 1974-83 SPM only

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133229700

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft gasket.



Fits:
Porsche 911 1969-73 / 912 1969
Porsche 911 1974-83 SPM only

Price is for each gasket.

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133229700

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft joint flange.


Fits:
Porsche 911 (930) Turbo 1975-86

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92833209703

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft joint tab washer.



Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95

Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133219100

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft joint tab washer.
For M10 CV Bolts



Fits:
Porsche 911 1969-89
Porsche 964 C2 / Carrera RS / Turbo 3.6L 1989-94
Porsche 928 1983-86 Chassis no from F 92DFS8 41008>> and F92FS8 40290>> M593
Porsche 928 1987-95

Click 'Zoom in' for large parts diagram.
Diagram parts Ref No 3.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133219100

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft pan head screw. M8 X 48. Rear Axle.



Fits:
Porsche 911 1965-68
Porsche 912 1965-68

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Price is for each bolt.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PAF107190

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft Pan Head Screw. M 10 X 55. Rear Axle.

Fits:
Porsche 911 1969-73
Porsche 912 1969

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

Price is for each bolt.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90006708701

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft.
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Length [mm] 406 mm
Wheel-side joint diameter [mm] 94.7 mm
Transmission-side joint diameter [mm] 94.7 mm
Bore Ø [mm] 8.2 mm
Number of Bores 6
Bolt Hole Circle Ø [mm] 78 mm
Service exchange part

Fits:
Porsche 911 >>1968 Manual cars
Short wheel base cars.

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Driveshafts are sold on a exchange basis, A surchange of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133202611

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203302

您正在查看的产品与这些编号存在交叉引用关系

Fits:
Porsche 911 1969-73 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.


*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133203309

您正在查看的产品与这些编号存在交叉引用关系

Replacement driveshaft. Brand new unit.



Fits:
Porsche 911 1969-73 Manual cars

Price is for each driveshaft. Fits left or right side

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133203309

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft.



Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars

Price is for each Driveshaft.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

92333203302

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft. Porsche 911 1985-86 (915 G15.72/73) 1987-89 G50 gearbox 

Overall length: 603mm Flange diameter: 111mm

Fits:
Porsche 911 1985-86 (915 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133202415

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft

Overall length: 603mm Flange diameter: 111mm

Fits:
Porsche 911 1985-86 (915 G15.72/73 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge will be held and then refunded when the old one is returned

Price is for each Drive Shaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91133202415

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft. Porsche 911 1985-89 Turbo / WideBody



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203708

您正在查看的产品与这些编号存在交叉引用关系

Reconditioned replacement driveshaft
Please note:
Reconditioned Alternators are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203708

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft.



Length [mm] 406 mm
Wheel-side joint diameter [mm] 94.7 mm
Transmission-side joint diameter [mm] 94.7 mm
Bore Ø [mm] 8.2 mm
Number of Bores 6
Bolt Hole Circle Ø [mm] 78 mm
Service exchange part

Fits:
Porsche 911 >>1968 Manual cars
Short wheel base cars.

Price is for each Driveshaft.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90133202611

您正在查看的产品与这些编号存在交叉引用关系

Driveshaft. Porsche 930 01/75-07/85 Turbo / 911 08/83-07/85 WideBody 

Driveshaft, complete with boots and bolts, rear, 476 mm

Fits:
Porsche 930 3.0L / 3.3L  01/1975 - 07/1985 Turbo
Porsche 911 08/83-07/85  Wide Body

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

93033203700

您正在查看的产品与这些编号存在交叉引用关系

Pan head screw M10 x 20



Fits:
Porsche 911 65-68

Rear wheel hub castle nut. M 22 x 1,5.



Fits:
Porsche 911 3.2 Carrera 1984 to 1989
Porsche 944 1986>>
Porsche 994 S2
Porsche 924S 1986-88
Porsche 928 1978-95
Porsche 986 1992-95

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90091009302

您正在查看的产品与这些编号存在交叉引用关系