专业工具

Bearing grease (200 g)



Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG04311000

您正在查看的产品与这些编号存在交叉引用关系

Bock engine stand for workbench.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986/987 Boxster
Porsche 987c Cayman

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer engine mounts. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand.
Here you get the required trestle to be able to mount the engine mount also on a workbench or the like.
We have the engine stands for all classic Porsche as well as the 3.4-3.8L waterboxers in our program.
The stand is for engine mounts with a diameter of 60mm.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6822

您正在查看的产品与这些编号存在交叉引用关系

Engine stand for engine mount.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.

Notice: The colour of the part may differ from the colour shown.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6898

您正在查看的产品与这些编号存在交叉引用关系

All Porsche factory tool kits included this pulley holding wrench to be used in conjunction with the box wrench when loosening the alternator nut to replace the v-belt.



Fits:
Porsche 911 2.0L / 2.2L / 2.4L 1969-74
Porsche 914-6 1970-72

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91172170200

您正在查看的产品与这些编号存在交叉引用关系

Input shaft flange nut socket for Porsche 911

STOMSKI RACING's version of the socket to remove/install the input shaft flange nut on the 901/911 (SR252) or 915/930 (SR252A) transmissions allows you to secure the input shaft using either end of the input shaft by mounting it to a factory tool (such as P256 from the first-gear end of the shaft) or a by using a clutch disk mounted in a vice.

Moreover, unlike the factory-style long-tube socket, with SR252 and SR252A there is less tendency to want to leverage away from the centerline of the input shaft. High quality impact-grade socket and hardened steel weldment with black oxide finish.

• SR252 for 901/911/914 transmissions.
• SR252A for 915/930 transmissions.

Each sold separately/individually.

Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997



Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.

The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.

Anodized Aluminum.