后控制臂

Spring plate rubber bushing kit
1 kit required per car



Fits
Porsche 911 - 1965 to 1989
Porsche 911 turbo - 1975 to 1989
Porsche 912 - 1966 to 1976

Choice of Compound

Trailing arm bushings are available in "Sport" and "Stock" hardness.

Stock Hardness
Replicates the OEM rubber to ensure factory ride quality and performance levels.

Sport Hardness
Sport bushings have a harder rubber compound for less deflection and more precise handling.
Sport provides a nice intermediate step between our Stock rubber trailing arm bushings are our top performing WeatherSealed Monoballs.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

22900

您正在查看的产品与这些编号存在交叉引用关系

Rennline Mono ball (Fast road & track) Front Control Arm Bushing (Rear Position)
One kit includes 2 bushings, (1 car set)

Fit:
Porsche 911/912/930 All - 1969-89

Split bushing removal tool. 1 req'd per lifetime.



Fits:
Porsche 911 / 912 / 930 1965-89
Porsche 964 / 993 1989-98
Porsche 944 / 968 / 924 1976-95 w/ aluminium control arms

Easily removes the following bushings:
• 911 / 930 / 912 trailing arm bushing
• 964 / 993 front lower control arm rear bushing
• 944 front lower control arm front bushing (aluminium arms)

It used to be a difficult task

This clever tool is a real time saver that makes easy work of removing split bushings. Doing the job with the arms still on the car for 911, 964, and 993 saves time and labor.

Split bushings are actually two separate bushings, each pressed in from opposite sides of the arm. Removing them requires driving them out from the parting line where they meet, in the center of the arm. This has traditionally been a difficult job that requires removing the arm and fumbling with a punch to try and drive out the bushings from the center.

Easy & quick
This tool makes it easy to engage the parting line and drive out the bushing. It is so easy that the job can be performed without removing the arm from the 911, 964, and 993.

Pro Mechanics and DIY'ers alike will appreciate the time saving this tool provides.

Combine with bushing installation tools part #2020904 to complete the job.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020903

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Heritage Collection Stabilizer Bar Bush Rear.
Stabilizer Bar Bush Rear - 18mm.
Drop Link Bush Rear - 18mm.
Fits - left and right side.



SET OF 4

Replacement for Porsche parts No. 91133379302

Fits:
Porsche 911 1974-77 Rear
Porsche 911 Turbo 1975-77
Porsche 914 1970-76 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-412-18H

您正在查看的产品与这些编号存在交叉引用关系

Trailing arm bushing installation tool. 1 req'd per lifetime.



Fits:
Porsche 911/912/930 1965-89

This tool allows installation of the trailing arm bushing without removing the arms from the car, and without a shop press. Can be used for installation rubber bushings as well as our Monoball Cartridges (hyperlink).

Recommended for use in combination with Split Bushing Removal Tool part #2020903

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020904

2020904

90133105900

您正在查看的产品与这些编号存在交叉引用关系

Trailing arm inner bush.
SET OF 4 for TWO Arms.
OEM Part Number: 90133105900



Fits:
Porsche 911 1970-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 3


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-410H

您正在查看的产品与这些编号存在交叉引用关系

Trailing arm monoball cartridges.
PAIR, 1 pair required per car



Fits:
Porsche 911/912/930/914 1965-89

Performance
Today's sticky tire compounds generate corner loads that easily compress factory rubber bushings causing wandering alignment settings. The result is that camber and toe change unpredictably, making steering imprecise and the car difficult to drive fast.

Monoball Cartridges replace compliant factory rubber bushings with hardened-steel spherical bearings. Unlike poly bushings that bind and resist movement, true spherical bearings allow free motion on multiple axis.

• Precise, razor sharp handling
• Holds alignment settings true
• Weather-Sealed for long life
• Eliminates camber loss due to compression
• Extremely low friction

Weather Seals

Our proprietary-design Monoball cartridges have optional weather seals to keep dirt out and extend product life.

This is the only Monoball suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.

Fitment

Front monoballs fit easily into the stock camber plates of 67-89 911/912/930 cars (911 341 018 00). Cars with pre-67 camber plates are recommended to switch to a 67-89 camber plate for fitment. 65 cars without camber plates require grinding to enlarge the strut top opening to allow fitment of the cartridges.

Easy Bushing Replacement How-To

Your existing bushings are pressed in place, they will need to be pressed out, and you will need to press in the new bushings but it's really easy when you have the right tools. To ease and speed the bushing removal and installation process without using a shop press please see our purpose designed Split Bushing Removal Tool and our Bushing Installation tool.

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2020901

您正在查看的产品与这些编号存在交叉引用关系

Powerflex PFF57-410 Trailing Arm Top Silencer Block.
SET OF 4 for 2 Arms.
OEM Part Number: 90133105900



Fits:
Porsche 911 1970-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 3

Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-410

您正在查看的产品与这些编号存在交叉引用关系

Powerflex Black Series Trailing Arm Top Silencer Block.
SET OF 4 for TWO Arms.
OEM Part Number: 90133105900



Fits:
Porsche 911 1970-89

Click 'Zoom in' for large parts diagram.
Diagram Ref No 3

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PFR57-410BLK

您正在查看的产品与这些编号存在交叉引用关系

SuperPro Trailing Arm Top Silencer Block.
Replacement for Porsche parts No. 90133105900
SET OF 4



Fits:
Porsche 911 1970-89
Porsche 912
Porsche 911 SWB

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SPF0988K

您正在查看的产品与这些编号存在交叉引用关系