专业工具

Bearing grease (200 g)



Fits:
Porsche 356 (1950 to 1965)
Porsche 911/912 (1965 to 1989)
Porsche 914 (1970 to 1976)
Porsche 924 / 924 S (1976 to 1988)
Porsche 928 (1978 to 1995)
Porsche 944 /2 (1982 to 1991)
Porsche 968 (1992 to 1995)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PCG04311000

您正在查看的产品与这些编号存在交叉引用关系

Belt tensioner for toothed belt.
Made in Germany



Fits:
Porsche 924S 2.5L 1986-88
Porsche 944 2.5L / 2.7L 1986>>
Porsche 944 S2 3.0L
Porsche 944 Turbo 951 2.5L

Here you get a tool to adjust the belt tensioner of the timing belt on your Porsche 924S and 944 from 1986 onwards. With this tool the adjustment of the belt tension is also possible under narrow space conditions.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

7314

您正在查看的产品与这些编号存在交叉引用关系

Camber adjustment tool. Rear axle.
Porsche ref number 00072191710



Fits:
Porsche 911
Porsche 968
Porsche 944

This special tool fits all Porsche 911, 924/944/968 trailing arm rear axles with torsion bar suspension and is used to adjust the camber.
For the adjustment, the vehicle is jacked up, the semi-trailing arm with the two screw connections released and rotated by means of this eccentric tool against the axle swords.

The tool has a galvanized surface with passive layer.
Quality "Made in Germany"

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1118

您正在查看的产品与这些编号存在交叉引用关系

DigiDix™ Adapter for Porsche 944 / 968



This adapter allows you to use DigiDix™ on all 944, 968, etc. crankshafts. Includes O-ring, and custom bolts for the perfect conversion.

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1154

您正在查看的产品与这些编号存在交叉引用关系

Special key for locking the balance shafts.
Porsche ref no 00072192000.



Fits:
Porsche 924 S
Porsche 944
Porsche 968

This tool is necessary for the exchange of the timing belt and allows the countering of the wheels during the process.

Made in Germany.

Note:
Trying to block the waves with pliers or lever is strongly discouraged: Not only by slipping the tool, but also by burrs on the roller, the new belt can be damaged.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1113

您正在查看的产品与这些编号存在交叉引用关系

Special key for timing belt replacement, 27mm.
Made in Germany



Fits:
Porsche 924S
Porsche 944
Porsche 968

Description:
The tool is for loosening and tightening the hard to reach running / tensioning rollers and allows a secure and defined tightening.

The tool has been specially developed for this application only and allows the correct replacement of the balance shaft belt and / or timing belt. The narrow design of the keyhole and the double offset offer the best possible accessibility to the key areas behind the rollers.

The key is 100% German produced. Material and component geometry were designed for the maximum load cases in this application. The corrosion protection is galvanic blue galvanizing.

Note:
Only an outdated 24mm wide version of the tool is available at Porsche although the manufacturers of the wheels are already adjusted to 27mm.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1130

您正在查看的产品与这些编号存在交叉引用关系

Removal tool injectors filter.



Fits:
Porsche 911
Porsche 996
Porsche 924S
Porsche 944
Porsche 968


Description:
With this special tool, the filters of the injectors can be removed quickly, cleanly and effectively. In addition, the tool has a centering syringe on the head side, with which the new filter can be pressed straight into the injection nozzle without tilting.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

5167

您正在查看的产品与这些编号存在交叉引用关系

Assembly tool for oil cooler repairs.
Porsche ref no 0007219261.



Fits:
Porsche 924 S (from 08.87)
Porsche 944 2.5 / 2.7 / S / S2 / Turbo (from 08.87)
Porsche 968

The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.

Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1120

您正在查看的产品与这些编号存在交叉引用关系

Assembly tool for oil cooler repairs.
Porsche ref no 00072192150.



Fits:
Porsche 924 S (until 07.1987)
Porsche 944 2.5 / S / turbo (until 07.87)
= all models with old heat exchanger housing


The seals of the oil-water cooler are a typical weak point on the transaxle models. For proper repair, Porsche provides this special tool to ensure correct positioning of the seal during installation. Incorrect installation and insufficient sealing can cause serious consequential damage.

Here you get a true-to-original assembly tool high quality machined and phosphate coated. We also have the required sealing kit for the oil cooler in our assortment.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1121

您正在查看的产品与这些编号存在交叉引用关系