Blower Motors & Fans

Electric Air Conditioning for Porsche 964 and 993 (two condensers)

The Electrocooler electric air conditioning system for Porsche 964/993 is an update to the original factory A/C system using an electric compressor pump.

• Fits vehicles with or without factory AC

The 964/993 blower unit and fans are retained but everything else is replaced.

All parts are provided except for the factory evaporator, which is available from Porsche
• All Electric. All modern components
• Weighs around 22 lbs (10 kg)
• Fits in front of vehicle
• Lightweight narrow hose set weighing under 4lbs (1.5kg)
• Easy Install. Bolt-in installation
• Clutter Free. Uses the standard fresh air vents to deliver cool air
• Simple to Use. Control by a single 'smart button' or original CCU
• Energy Efficient. Uses less than 1 HP of engine power
• Fits all models of 964 / 993 including RS
• Fits vehicles with or without factory AC

All 964 systems are now shipped with two condensers for increased cooling performance. Check our install manual here for details on second condenser fitment.

Please note! Our electric air conditioning likes a healthy current. We recommend upgrading the original alternator in the vast majority of installations. Porsche 964 and 993 models are less affected but may still benefit.

Electric motor temperature mixing flap crank.


Fits:
Porsche 964 Carrera 2/4 (1989 to 1994)

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96457220500

您正在查看的产品与这些编号存在交叉引用关系

Electric motor temperature mixing flap.


Fits:
Porsche 964 Carrera 2/4 (1989 to 1994)

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96462432400

您正在查看的产品与这些编号存在交叉引用关系

发动机舱鼓风机电机和风扇（不带外壳）。



适合：
保时捷 964 1990-94 年（非涡轮增压）
保时捷 993 1994-98
保时捷 993 Turbo 1994-98

请点击“放大”查看大部件图。
适合图表上的数字 11。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99362432801

您正在查看的产品与这些编号存在交叉引用关系

Heater / Aircon blower motor. Inside front bluk head. Left side.



Fits:
Porsche 964 1989-94
Porsche 993 1994-98

Click 'Zoom in' for large parts diagram.
Diagram ref no 5.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96457201501

您正在查看的产品与这些编号存在交叉引用关系

加热器/空调鼓风机电机。前大头内。



适合：
保时捷 964 1989-94
保时捷 993 1994-98

单击“放大”查看大零件图。
图参考号 5。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

96457201

您正在查看的产品与这些编号存在交叉引用关系

This a replica of the Porsche Germany RS lightweight factory heat duct that was used on all 3.6 liter special RS lightweight rare cars.

The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.

Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.

Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.

Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.

Simple do it yourself 20 minute installation that gives you the RS style engine look.

All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below

fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997

To see a video about this product Click Here

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

964167003

您正在查看的产品与这些编号存在交叉引用关系

发动机舱风扇和鼓风机电机的外壳。



适合：
保时捷 964 1990-94 年（非涡轮增压）
保时捷 993 1994-98
保时捷 993 Turbo 1994-98

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99362432801

您正在查看的产品与这些编号存在交叉引用关系

鼓风机电机和风扇 - 位于发动机舱内。不再有轴承发出嘎嘎声。



适合：
保时捷 964 1990-94 年（非涡轮增压）
保时捷 993 1994-98
保时捷 993 Turbo 1994-98

单击“放大”可查看大部件图。
图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99362432801

您正在查看的产品与这些编号存在交叉引用关系

鼓风机电机和风扇 - 位于发动机舱内。不再有轴承发出嘎嘎声。



适合：
保时捷 964 1990-94 年（非涡轮增压）
保时捷 993 1994-98
保时捷 993 Turbo 1994-98

单击“放大”可查看大部件图。
图表参考编号 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99362432801

您正在查看的产品与这些编号存在交叉引用关系

Rennline RS Carbon Fiber Heater Duct.



Fits:
Porsche 964/993 89-98 EXCEPT 95's*. 993's require the 964 fan shroud part # 964.106.403.02 . Many people are using these on 95's but fitment at the base is poor, and we do not recommend installation on this model year.

Rennline’s blower motor bypass pipe is a carbon fiber replica of the factory installed unit found on the lightweight 3.6 RS race cars. This pipe allows you to save 9 pounds from the removal of the factory blower motor assembly, but still have a functioning heater system in your car. Manufactured from ultra strong, lightweight carbon fiber and comes equipped with the aluminum fitting for the distributor breather tube. Available with or without a machined aluminum 3.6 (or 3.8) insignia plate at the top.

Note: Pictures may not show actual product.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

M09

您正在查看的产品与这些编号存在交叉引用关系

Rennline RSR/Cup Heater Fan Delete Kit.

Fits:
Porsche 964/993 1989-95 Non VarioCam Cars
*** Will not work on Turbo cars.

Removing the blower motor assembly from your 1989-98 964/993 is a very standard modification for cars that want to loose a few pounds. This modification reduces your cars weight by about 10 pounds and really cleans up the engine bay. This kit is an exact replica as used by Porsche Motorsports for the factory lightweight 964 CUP and 964 RSR race cars. Manufactured from aluminum and is available in Red and Black Powder coat or clear anodized. Comes with all the stainless steel hardware required for a 20 minute installation.

Note: Pictures may not show actual product.

Tapping screw B4,8 x 13 - Multiple applications



Fits:
Porsche 911 - 1970 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 928 - 1983 to 1995



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90038400601

您正在查看的产品与这些编号存在交叉引用关系