防翻架

Roll cage 6 point bolt in with single door bars.
For cars without sunroof



MSA/FIA homologated. Certificate 1100 available from MSA

Fits
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994
Porsche 964 RS- 1992 to 1993

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. This allows use of inertia reel seatbelts.

Rear roll cage section is available with different options.
For vehicles WITHOUT sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

Roll cage 6 point bolt in with single door bars.
For cars with sunroof



Not for Competition Use

Fits
Porsche 964 Carrera 2 / Carrera 4 - 1989 to 1994
Porsche 964 RS- 1992 to 1993

6 point bolt-in roll cage for single door bars.
This clears normal trim and dashboard and mounts to the floor and rear wheel arches. This allows use of inertia reel seatbelts.

Rear roll cage section is available with different options.
For vehicles WITH sunroof

Build the roll cage to your individual specification using the rear cage and door bar options available below.

For Single Door Bars
• Front cage (Must be used with the front and rear cage)
• Rear cage, single fixed diagonal (May be used without the front cage)
• Rear cage, single fixed diagonal and harness bar (May be used without the front cage)
• Rear cage, cross diagonal and harness bar
(May be used without the front cage)
• Single door bar N/S (left)
• Single door bar O/S (right)
• Finished roll cage supplied with black powder coat finish

适用于保时捷 911 车型的螺栓式防滚架，防滚杆为螺栓式装置，无需焊接，还包含安装硬件。防滚架有或无中央线束杆可供选择。

适合：
保时捷 964 1989-94

每个防滚架都是按订单制作的，并采用 RAL 颜色粉末喷涂。您可以在订购时指定 RAL 颜色。
交货时间约为 8 周。如果您订购不常见的特定颜色，交货时间可能会更长。
标准颜色：黑色（RAL 9005）、红色（RAL 3000 或 RAL 3020）、白色（RAL 9016）或黄色（RAL 1003 或 RAL 1023）

请访问http://www.ralcolor.com/并告诉我们您想要的颜色。

它使用防滚架附带的安装套件安装在安全带的原始安装点上。
因此不需要对车身进行切割或焊接。

安装指南？

• 把座位拿走
• 松开安全带固定点的螺栓
• 抬起防滚架（仅需 2 个人，以防止损坏任何表面）
• 将防滚架放入车内
• 使用安装套件安装防滚架，并将安全带安装回原位，但不要用螺栓固定
• 使用冲压导向销（类似帐篷杆上的数字）安装防滚架的各个部件，确定哪个部件需要放到哪里（在防滚架和松散部件中）
• 用螺栓将其固定在地板上
• 安装座椅
• 试驾汽车，听听是否有异响，看看是否需要对固定装置施加额外的扭矩
• 享受！

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P964RB

您正在查看的产品与这些编号存在交叉引用关系