标准制动盘
Diameter Ø: 322 mm,
Brake Disc Thickness: 32,0 mm,
Height: 77,0 mm
Porsche 964 RS 1991-93 FRONT AXLE
Porsche 964 C2 TURBO LOOK 1992-93 FRONT AXLE
Porsche 964 TURBO 3.3L 1991-92 FRONT AXLE
Brake disc rotors are priced each.
Please note: OE brake discs and brake pads are not stocked items and fall under special order terms.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96535104
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
Diameter Ø: 322 mm,
Brake Disc Thickness: 32,0 mm,
Height: 77,0 mm
Porsche 964 RS 1991-93 FRONT AXLE
Porsche 964 C2 TURBO LOOK 1992-93 FRONT AXLE
Porsche 964 TURBO 3.3L 1991-92 FRONT AXLE
Brake disc rotors are priced each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96535104
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
Fits Left or Right.
Porsche 964 RS 1991-93 REAR AXLE
Porsche 968 CS M030 1991-93 REAR AXLE
Brake disc rotors are priced each.
Please note: OE brake discs and brake pads are not stocked items and fall under special order terms.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95135204192
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 968 CS 3.0L 1993-95
Porsche 964 RS 1991-93 REAR AXLE
Porsche 968 CS M030 1991-93 REAR AXLE
Diameter 299 mm
Hub Bore Ø 103 mm
Height 100 mm
Thickness 24 mm
Brake disc rotors are priced each.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
95135204192SEB
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 968 CS 3.0L 1993-95
For brake systems and is highly temperature-resistant (up to 1,000°C).
Available in 75ml tube and 5ml sachet
The advantages of Cera Tec:
• Non-conductive and contains no solids
• Suitable for ABS
• Facilitates brake installation
• Reduces brake squealing
• Protects against scoring and corrosion
• Free of copper and acids
• Pressure-resistant / high viscosity
Cera Tec is also suitable for lubricating:• Disc- and drum-brake systems
• Compressors
• Centralised lubrication systems
• Axle bearings
• Chains
• Seat rails
• Sunroof tracks
• Battery terminals
Application:
Apply a thin layer of Cera Tec on the marked sections
• brake, clutch and gear components
• starter motors and alternators
• carburetors, fuel pumps and engine components
• glass and metal surfaces before gluing
The advantages of Textar brake cleaner:
• does not destroy polystyrene
• does not contain any chlorinated solvents
• is listed with the German Federal Ministry for the EnvironmentHow to use:
Spray a thick coating on the parts to be cleaned. Allow the solvent to drip and/or evaporate. Repeat if necessary.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96000100
您正在查看的产品与这些编号存在交叉引用关系