运动消音器/消声器
按品牌过滤
Akrapovic Evolution header set (Titanium). Porsche 991.2 GT3 RS / Speedster 2019>> with OPF/GPF filter
代码: E-PO/T/6/1
Akrapovic Evolution header set (Titanium)
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
E-PO
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 GT3 RS (991.2) with OPF/GPF 2019 - 2020
Porsche 911 Speedster with OPF/GPF 2019 - 2020
Evolution Header Set (Titanium) must be mounted together with:
• Slip-On Line (Titanium) system S-PO/TI/15
or
• Slip-On Race Line (Titanium) system S-PO/TI/8.
An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
Evolution Header Set converts the slip-on system into a full system designed to give noticeably increased power at higher revs. Handcrafted titanium headers incorporate 100 cpsi sports catalytic convertors and side mufflers—all designed to increase power and torque—the Evolution Header Set utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. With the valves in the open position, it delivers a sportier and hard-hitting sound, but also has the option of a lower sound level when the valves are closed, perfect for use in more everyday locations. Offering an increased weight savings in the area behind the engine and the rear axle, the reduction will enhance the handling and improve performance.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
E-PO
9GT254400B
9GT254400E
9GT254450B
9GT254450E
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€9,917.90
当前 €9,719.54
由供应商供货 
Akrapovic Slip-On Line (Titanium). Porsche 991.2 GT3 RS
代码: S-PO/TI/10H
Slip-On Line (Titanium)
Fits:
Porsche 911 (991.2) GT3 RS
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovič sound, while still meeting ECE specifications.
The mandatory tail pipe set TP-T/S/19/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17/H or TP-T/S/17.
The Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 (991.2) GT3 RS
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3 RS's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 RS more powerful and lighter, and gives the car that unique Akrapovič sound, while still meeting ECE specifications.
The mandatory tail pipe set TP-T/S/19/H needs to be ordered separately. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17/H or TP-T/S/17.
The Slip-On system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves. If the system is upgraded with link pipe or evolution sets, the ECE type approval is not valid anymore.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
99111102790
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€4,917.06
当前 €4,818.72
由供应商供货
Akrapovic Slip-On Line Titanium Exhaust for Porsche 991 (911) GT3 / RS 2014>>
代码: MTP-PO997GT3H/1
Akrapovic Slip-On Line Titanium Exhaust
Fits:
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
MTP-PO997GT3H
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 991 (911) GT3 2014>>
Porsche 991 (911) GT3 RS 2014>>
Akrapovič's Slip-On Line represents the first step in the exhaust system tuning process and the muffler can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique Akrapovič sound. Designed to make the car stand out from the crowd and increase its appeal even more, the visual delight of the Akrapovič Slip-On can be further enhanced with the addition of an optional carbon- fibre rear diffuser. Beautifully handcrafted from the finest materials and designed to enrich the exclusive look of the titanium exhaust system, the diffuser is a must-have extra for any discerning owner.
TECHNICAL DATA
* measured with: Porsche 911 GT3 RS (991) 2014
Maximum power:
- kW: plus 4.5 at 7800 rpm
- HP (m): plus 6.1 at 7800 rpm
- HP (i): plus 6 at 7800 rpm
Maximum torque:
- Nm: plus 4.9 at 8100 rpm
- lb-ft: plus 3.6 at 8100 rpm
Weight:
- minus 1.1 kg / 2.4 lb
*** Mandatory Extra Part Required
Tail pipe set (Titanium) - part no TP-PO991RS/H/T
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
MTP-PO997GT3H
99711102792
99711102799
99111102790
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€4,815.58
当前 €4,719.27
库存
Akrapovic Slip-On race line (Titanium). Porsche 911 (991.2) GT3 RS OPF model
代码: S-PO/TI/15
Slip-On race line (Titanium).
Fits:
Porsche 911 (991.2) GT3 RS OPF model
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Slip-on system (S-PO/TI/15) for GT3 RS OPF model must be mandatory combined with:
- Evolution Header Set (E-PO/T/6)
- Tail pipe set TP-T/S/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17.
- An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
This Slip-On system (S-PO/TI/15) must be upgraded into a full Akrapovič Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO/T/6) with side mufflers and valves, which is designed to unleash the system's full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovič's own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 (991.2) GT3 RS OPF model
Hard facts:
power: +4.6 kW at 4200 rpm
torque: +10.4 Nm at 4200 rpm
weight: -1.4 kg
Slip-on system (S-PO/TI/15) for GT3 RS OPF model must be mandatory combined with:
- Evolution Header Set (E-PO/T/6)
- Tail pipe set TP-T/S/19. When combining the slip-on system with optional carbon fibre diffuser DI-PO/CA/7/G, you must use tail pipe set TP-T/S/17.
- An additional original Porsche stock bracket (Porsche p/n: 99111147391) is required for mounting the Akrapovič exhaust system. Please read the instructions carefully before the start of the installation.
This Slip-On system (S-PO/TI/15) must be upgraded into a full Akrapovič Evolution Line exhaust system by combining it with the Evolution Header Set (E-PO/T/6) with side mufflers and valves, which is designed to unleash the system's full potential and enhance the performance of the car as the revs rise. With superb attention to detail, including parts cast in Akrapovič's own titanium foundry, the craftsmanship and coating finish on the system is a joy to behold. With an exhaust manifold incorporating 100 cpsi sports catalytic convertors and side mufflers, the Evolution Line utilizes integrated catalytic convertors and the functionality of the exhaust valves to deliver an out-and-out attack on the senses. It offers increased weight savings in the area behind the engine and rear axle. The Evolution Line is also tuned to deliver a sporty and hard-hitting sound. The more the engine is revved and the acceleration builds, the six-cylinder engine sound delivers a rich, harmonic, and high-frequency soundtrack, making every journey a memorable experience and one that continues even after the throttle is released, providing a full and rewarding sensory experience.
When installing Akrapovič aftermarket optional link pipes with sports catalytic converters or without catalytic converters, which are developed for use on closed tracks only, remapping the ECU is mandatory. When installing Akrapovič aftermarket exhaust system that was developed for use on closed tracks, we recommend remapping the ECU in order to prevent potential »check engine light« warning signals.
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
99111102790
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€4,917.06
当前 €4,818.72
由供应商供货
Akrapovic Slip-On race line (Titanium). Porsche 991.2 GT3 2018
代码: S-PO/TI/8
Slip-On race line (Titanium)
Fits:
Porsche 911 GT3 (991.2) 2018
Hard facts:
power: +6.5 kW at 4400 rpm
torque: +15.2 Nm at 4400 rpm
weight: -4.7 kg
Akrapovič's Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovič sound.
Please note: The mandatory tail pipe set TP-T/S/17 needs to be ordered separately.
The Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.
The look of this system can be further enhanced with the addition of the superbly handcrafted high-quality optional carbon- fibre rear diffuser in matte and high gloss finish to give even more exclusivity to the Porsche 911 GT3 RS (991.2).
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
您正在查看的产品与这些编号存在交叉引用关系
Fits:
Porsche 911 GT3 (991.2) 2018
Hard facts:
power: +6.5 kW at 4400 rpm
torque: +15.2 Nm at 4400 rpm
weight: -4.7 kg
Akrapovič's Slip-On Race Line represents the first step in the exhaust system tuning process and it can easily be installed onto the Porsche GT3's original system. Built from hi-grade titanium and finished with two eye-catching double round tailpipes, this entry system makes the GT3 more powerful and lighter, and gives the car that unique, sporty Akrapovič sound.
Please note: The mandatory tail pipe set TP-T/S/17 needs to be ordered separately.
The Slip-On Race system can be optionally combined with Link Pipe Set (Titanium) that retains stock headers and removes stock side mufflers, or it can be upgraded into a full Akrapovič exhaust system, either with combining it with Evolution Race Header Set without valves or Evolution Header Set with side mufflers and valves.
The look of this system can be further enhanced with the addition of the superbly handcrafted high-quality optional carbon- fibre rear diffuser in matte and high gloss finish to give even more exclusivity to the Porsche 911 GT3 RS (991.2).
THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
S-PO
99711102792
99711102790
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€2,638.48
当前 €2,585.71
由供应商供货
Exhaust final muffler with black chrome tailpipes Porsche 991 GT3 - DesignTek
代码: 3606609136
Exhaust final muffler with black chrome tailpipes
High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609136
您正在查看的产品与这些编号存在交叉引用关系
High quality SUS304 stainless steel exhaust rear section compatible with OE rear mufflers. Complimented by black chrome tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609136
99711102799
99711102790
99711102792
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€820.10
当前 €803.70
即将抵达
Sports exhaust rear silencer straight pipe Porsche 911 GT3 GT3 RS and 911 R
代码: TSPO991GT317.001.T
Sports exhaust rear silencer titanium straight pipe Porsche 911 GT3 GT3 RS and 911 R 2013-2019
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO991GT317.001.T
您正在查看的产品与这些编号存在交叉引用关系
Made from titanium
Straight pipe replaces rear centre silencer
FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Replaces centre silencer and tailpipe trims
SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip
OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip
END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance
END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre
MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.
CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
TSPO991GT317.001.T
99711102792
99711102799
99111102790
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
- Porsche 992 GT3 4.0L
€3,939.39
当前 €3,860.60
由供应商供货
Sports exhaust rear silencer straight pipe Porsche 997 GT3 and GT3 RS
代码: TSPOGT3C10.900.AT
Sports exhaust rear silencer straight pipe Porsche 997 GT3 and GT3 RS
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
Replaces rear silencer with straight through pipe
Fits
Porsche 911 GT3 and GT3 RS (997 Gen 1 and Gen 2)
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 upto 2019)
This product can be mounted on every GT3, GTR RS, GT3 RS 4.0 versions, both on 997 Gen 1, Gen 2 and on 991.1 and 991.2 up to 2019
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning
END TIPS NUMBER AND POSITION - 2 CENTRAL
The end tips emerge from the centre
SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves
MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal
MAIN PIPE DIMENSION - 65mm
This is the diameter in mm of the main pipe of the exhaust system
产品车辆组
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€2,795.70
当前 €2,739.79
即将抵达
Sports exhaust side silencer straight pipe non valved Porsche 991 GT3 and GT3 RS
代码: 3606609140
Sports exhaust side silencer straight pipe (non valved) Porsche 991GT3 and GT3 RS
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609140
您正在查看的产品与这些编号存在交叉引用关系
Bypass pipes for side mufflers.
Fits
Porsche 911 GT3 and GT3 RS (991.1 and 991.2 2014-2019)
RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector
Material: Stainless Steel 304
Replacement for Genuine muffler 991.111.048.81
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609140
99711104782
99711104784
99711104781
99711104882
99711104881
99711104884
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 Speedster 4.0L (510Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
€820.10
当前 €803.70
库存
Titanium Exhaust final muffler with carbon tailpipes Porsche 991 GT3 - DesignTek
代码: 3606609124
Titanium Exhaust final muffler with carbon tailpipes
High quality titanium exhaust rear section compatible with OE rear mufflers. Complimented by carbon fibre tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609124
您正在查看的产品与这些编号存在交叉引用关系
High quality titanium exhaust rear section compatible with OE rear mufflers. Complimented by carbon fibre tail pipe in ⌀89mm
Designed for maximum flow and no restriction.
Reduced back pressure and better scavenging. More torque and horsepower across the RPM band.
Fits:
Porsche 991 GT3 3.8L 476 Bhp 2013 - 2017 (A175 engine)
Porsche 991 GT3 RS 4.0L 507 Bhp 2013 - 2017 (A175 engine)
Porsche 911 R 4.0L 507Bhp 2014-2017 (A176 engine)
Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。
3606609124
99711102799
99711102790
99711102792
您正在查看的产品与这些编号存在交叉引用关系
产品车辆组
- Porsche 991 R 4.0L (500 Bhp)
- Porsche 991 GT3 3.8L (475Bhp)
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€1,268.50
当前 €1,243.13
库存
显示从1到10（共10个产品）
也可在这些页面找到
关于运动消音器/消声器
标题：升级保时捷排气系统：原装保时捷与售后消声器和运动型排气系统
关键词：保时捷、排气消声器、运动型排气、升级、更换、技术规格、已知问题、Design911、专业建议
概括：
原装保时捷排气消声器：
由保时捷为特定车型设计和制造
按照严格的质量标准设计
精确调整以获得最佳性能和声音
保持保时捷的真实性和原创性
与现有组件和系统兼容
售后排气消声器：
由专门从事性能升级的第三方制造商生产
提供多种定制选择
可以增强排气音、性能和美观度
可以提供更好的流动动力学以提高发动机效率
考虑与您的保时捷车型的兼容性和适合性
运动型排气系统：
旨在最大程度提高性能并增强驾驶体验
通常包括更大直径的管道、更具运动感的消声器和优化的气流
提供更大的马力和扭矩
产生更具侵略性和令人振奋的排气声音
查看当地有关噪音限制的法规
在考虑为您的保时捷购买排气消声器或运动型排气管时，应考虑几个因素。首先，确定您的具体要求，无论是声音的轻微改善还是性能的显著提升。研究所选排气系统与您的保时捷车型的技术规格和兼容性。考虑您的预算和制造商或零售商的声誉。确保产品有保修或担保至关重要。
在 Design911，我们可以帮助您找到适合您的保时捷的排气管部件。我们知识渊博的团队可以根据您的要求提供专业建议，并指导您完成选择过程。我们备有各种原装保时捷零件以及信誉良好的售后市场选项，确保您能够获得高质量的选择。相信 Design911 可以帮助您提升保时捷的性能并提供无与伦比的驾驶体验。
注意：以上摘要概述了升级保时捷车辆排气系统的好处和注意事项。在进行任何修改之前，始终建议咨询专业人士并考虑个别车辆的规格和法规。
您可能也喜欢
流行车型
