陶瓷制动盘替换件

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118123

您正在查看的产品与这些编号存在交叉引用关系

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 Turbo with Ceramic Brakes (PCCB)

Porsche 997 Turbo Without Ceramic
Porsche 997 C2 / C2S / C4S with Ceramic Brakes (PCCB)
Porsche 997.2 C2 with Ceramic Brakes (PCCB)
Porsche 987 Cayman S with Ceramic Brakes (PCCB)
Porsche 991.1 C2S with Ceramic Brakes (PCCB)
Porsche 991 C4S with Ceramic Brakes (PCCB)
Porsche 981 Boxster S with Ceramic Brakes (PCCB)
Porsche 981 Cayman S with Ceramic Brakes (PCCB)
Porsche 718 Boxster S / GTS with Ceramic Brakes (PCCB)
Porsche 718 Cayman S / GTS with Ceramic Brakes (PCCB)
Porsche 991.2 C2S / C4S / GTS
Porsche 992 C2S / C4S


Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

PAGID RSC-1 复合刹车片

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991.1 3.4L Carrera [带 RBD 铸铁盘的陶瓷制动钳] 2011 - 2016 年（后）
保时捷 991.1 3.8L Carrera S [带 RBD 铸铁盘的陶瓷制动钳] 2011 - 2016 年（后）
保时捷 991.1 3.4L Carrera [陶瓷刹车] 2011 - 2015 (后)
保时捷 991.1 3.8L Carrera S [陶瓷刹车] 2011 - 2015 (后)
保时捷 991.1 3.8L Carrera 4S [陶瓷刹车] 2011 - 2015 (后)

保时捷 991.2 3.0L Carrera [陶瓷刹车] 2015 - 2018（后）
保时捷 991.2 3.0L Carrera S [陶瓷刹车] 2015 - 2018（后）

保时捷 992 3.0L Carrera [铁刹车] 2018>>（后）
保时捷 992 3.0L Carrera S [铁刹车] 2018>>（后）
保时捷 992 3.0L Carrera 4S [铁刹车] 2018>>（后）

保时捷 970 Panamera [陶瓷刹车] 2009 - 2016 (后)

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业当前的所有生态标准。

RSC 1是一种低金属树脂粘结材料，含有钢和芳纶纤维。该材料具有良好的综合特性，适用于所有类型的用途。

• 中等摩擦系数
• 良好的全面性能特征
• 适合光盘

应用范围：适用于所有已知类型的陶瓷刹车盘的比赛和赛道日复合材料。


有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4909RSC1

您正在查看的产品与这些编号存在交叉引用关系

PAGID RSC-1 复合刹车片

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991.1 3.4L Carrera 2011 - 2015 [陶瓷刹车（前）
保时捷 991.1 3.8L Carrera S 2011 - 2015 [陶瓷刹车（前）

保时捷 991.2 3.0L Carrera 2015 - 2018 [陶瓷刹车]（前部）
保时捷 991.2 3.0L Carrera S 2015 - 2018 [陶瓷刹车]（前部）

保时捷 981 Cayman S 2013 - 2016 [陶瓷刹车]（前部）

保时捷 718 Boxster 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster S 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Boxster T 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster GTS 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Boxster GTS 4.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster Spyder 4.0ltr [陶瓷刹车]（前部）

保时捷 718 Cayman 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Cayman S 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Cayman T 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Cayman GTS 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Cayman GTS 4.0ltr [陶瓷刹车]（前部）

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业当前的所有生态标准。

RSC 1是一种低金属树脂粘结材料，含有钢和芳纶纤维。该材料具有良好的综合特性，适用于所有类型的用途。

• 中等摩擦系数
• 良好的全面性能特征
• 适合光盘

应用范围：适用于所有已知类型的陶瓷刹车盘的赛车和赛道日复合材料。


有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

Zimmermann Formula:R race front brake pads. 
Designed exclusively for cast-iron brake discs

The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. 

RACETRACK USE ONLY.




Porsche 718 Boxster / Cayman 2.0ltr - 2017 Onwards
Porsche 718 Boxster S / Cayman S 2.5ltr - 2017 Onwards
Porsche 718 Boxster T / Cayman T 2.0ltr
Porsche 718 Boxster GTS / Cayman GTS 2.5ltr
Porsche 718 Boxster GTS / Cayman GTS 4.0ltr
Porsche 718 Boxster Spyder / Cayman GT4 4.0ltr
Porsche 991.1 Carrera / Carrera 4 3.4ltr - 2012 to 2016
Porsche 991.1 Carrera S / Carrera 4S 3.8ltr - 2012 to 2016
Porsche 991.2 Carrera / Carrera 4 3.0ltr - 2016 to 2018
Porsche 991.2 Carrera S / Carrera 4S 3.0ltr - 2016 to 2018
Porsche 991.2 Carrera GTS / Carrera 4 GTS 3.0ltr - 2016 to 2018
Porsche 992 GT3 - 2019 Onwards

Formula:R Brake Pads – for your perfect braking point. 

Compound Type:

OZ 20: suitable for long distance series; extremely high stability of the friction coefficient over a wide temperature range
OZ 30: suitable for sprint distances; highest friction coefficient with good wear properties of brake disc and brake pad

The mixtures of the friction material of Formula:R brake pads are individually developed in cooperation with our racing team and are successfully tested in endurance racing. The durability of brake discs and brake pads are just as important as a stable friction coefficient, which ensures that the pads are extremely fading-resistant. To adapt the pads to the individual requirements of different drivers, different friction compounds are available for some applications.

Zimmermann has been manufacturing high-quality brake parts at the Sinsheim site for more than 60 years. Our brake parts are used successfully in the Nürburgring Endurance Series (NLS) under the extreme conditions at the Nürburgring and are constantly being further developed.

Made in Germany

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98135193904ZIMFR

您正在查看的产品与这些编号存在交叉引用关系