发动机改装及升级

铝制进气歧管高流量 Y 型管。



适合：
保时捷 991.2 Turbo /S

新款 Turbo IPD Y 型管提供与上一代 Turbo 相同的惊人性能。保时捷对 991 Turbo 到 991.2 Turbo 的进气系统几乎没有做任何改动。弹道加速度和超过 200 英里/小时的最高速度使新款 Turbo 成为超级跑车中的佼佼者。但当然，IPD Y 型管（和 Plenum）将性能标准提高到了更高的水平，适合那些希望从德国 Turbo 导弹中获得战斗机性能的保时捷驾驶爱好者。

IPD 投入了无数小时的研发时间，开发了各种独特的设计功能，并进行了多次原型测试，最终确定了一种最佳设计，可显著提高原厂和高度改装的 991 Turbos 的发动机性能。我们创新的 Y 型管道设计不仅更大，而且还采用了“非圆形”流道、优化的合并收集器区域和我们久经考验的凹陷内部表面。这种卓越的设计可提供更大的空气量、改善层流和提高空气速度。这些改进可提供额外的 40+ 轮马力、50+ 英尺磅的扭矩、改进的增压响应以及更线性的功率和扭矩曲线。
众所周知，在强制进气应用中，越大并不总是越好。IPD Y 型管比工厂生产的要大得多，但并不大到导致进气道内压力下降，从而导致涡轮迟滞和性能下降。这种优化的“非圆形”设计带有凹陷的内表面，这是传统圆管结构无法实现的。

991 Turbo Y-Pipe 是一种直接螺栓固定式发动机升级，无需任何改装，但应由熟悉 991 平台的经验丰富的保时捷技术人员进行操作。Y-Pipes 配备了完成安装所需的所有硬件。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91500.2

您正在查看的产品与这些编号存在交叉引用关系

IPD 铝制进气集气室。74 毫米。



适合：
保时捷 991.2 Turbo /S
保时捷 GT2 RS

IPD 接收了 991.2 Turbo S，并在它抵达新家的那一刻就开始了研发。新款 Turbo 并没有从任何一项特定的升级中获得实质性的收益，但其改进的总和使其整体 Turbo 比它所取代的已经令人印象深刻的 991.1 Turbo 更胜一筹。是的，我们知道最新的 Turbo 速度更快，马力增加了 20 马力，但正是轻快的换挡、锋利的操控和与车辆的精神联系的结合提升了非凡的新款 991.2 Turbo 的驾驶体验。

保时捷对最新的 991.2 Turbo 进行了大量重大升级。发动机改进包括改进的进气口、更大的喷油器、更大容量的燃油泵、更大的涡轮压缩机叶轮和更高效的中冷器，但工厂进气系统保持相对不变，只需进行微小改动即可安装 IPD 增压室和 Y 型管。

991.2 Turbo Plenum 升级版提供惊人的发动机功率和扭矩增益，将提升本已强大的超级跑车的性能标准，让您毛骨悚然。整个功率带的马力增益都很高，大部分增益是在 3500-5000 RPM 范围内实现的。45+ 轮毂马力的最大功率增益在 4300 RPM 时达到，并一直保持强劲直至红线。在中档时，扭矩在 60+ 时更加令人印象深刻，扭矩在 3500-5000 RPM 时大幅增加。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91274.2

您正在查看的产品与这些编号存在交叉引用关系

碳进气集气室高流量 Y 型管。






相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

91600.2

您正在查看的产品与这些编号存在交叉引用关系

Performance inlet hose kit.

To fit:
Porsche 991 Turbo and Turbo S from 2013 onwards
Fits both generation 1 and 2 models

do88 proudly presents the worlds first high flowing turbo inlet hoses for Porsche 991.1 / 991.2 Turbo. Self developed by do88 in Sweden !

• Much larger overall inner diameter for improved air flow, 31 % higher! (see graph diagram ). The hoses have a 2,5 inch (63mm) inner diameter at the narrowest location.
• Smooth flow transitions.
• Very smooth internal surface for best air flow.
• Excellent thermal properties, the hoses will not absorb heat from the engine.
• The hoses are reinforced with stainless steel wire to eliminate the risk of implosion on high out-takes.

It was a real challenge developing new turbo intake hoses for the 991 Turbo. The lack of space made it really difficult to make a set of hoses that would outflow the stock plastic pipes. We succeeded but in some smaller areas we had to compromise and allow these hoses to have no clearance, so they will push or rub in some non-sensitive areas.

Porsche 911 turbo. This immortal icon. The absolute essence of the motorworld´s cars, the Porsche 911, elevated by ten – applied with turbo charging. Could it get any better for a car enthusiast?

Owning a Porsche implicates more than just owning a car. A Porsche is a Porsche. You find yourself travelling in the true definition of immortality, feeling ever so alive. Owning a Porsche is all about enjoying every single detail there is to it. Everything ought to be as optimised and as refined as possible.

This is where do88 fit in. Our self-developed intake hoses increase air flow with 31 %. We can ensure you the sensation while driving is very different. The improvement in throttle response is immense, making the car feel so much more refined and alert. This upgrade makes it become what it should have been from the start. This is an improvement no test figures can explain, it has to be perceived behind the wheel of a 991 turbo!

The package includes everything for mounting:
• 2 wire-reinforced silicone hoses
• 2 silicone hoses
• 2 breather valves
• 2 CNC machined VTG adapters
• Clamps and Screws

This product is available in 2 options, OEM Porsche turbos or with 51.5mm turbo adapters for cars where the compressor wheel has been replaced, and compressor housing machined larger.
Please select your turbo type below.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

KIT179

您正在查看的产品与这些编号存在交叉引用关系

Semi-solid tunable engine mounts,  (SET OF 2) including extra polyurethane inserts 
CNC machined from billet aluminum.  

Fits:

Porsche 991 Carrera C2 3.4L (350Bhp)
Porsche 991 Carrera C2S 3.8L (400Bhp)
Porsche 991 Carrera C4 3.4L (350Bhp)
Porsche 991 Carrera C4S 3.8L (400Bhp)

Set your mounts by using the required inserts:
ORANGE - Street 65A Polyurethane
BLACK - Fast road 75A Polyurethane
RED - Race 85A Polyurethane

Please note: if your car has PADM (Dynamic engine mounts - I140 option code), you can fit these mounts but will need to turn the error code off the log.

Tunable semi-solid engine mount, Pair. 

Fits:

Porsche 991 Carrera C2 3.4L (350Bhp)

Porsche 991 Carrera C2S 3.8L (400Bhp)

Porsche 991 Carrera C4 3.4L (350Bhp)

Porsche 991 Carrera C4S 3.8L (400Bhp)

For Cars with Dynamic Engine Mount PADM (I140) this can be fitted however you will need to Get the Error code Turned off.

The Rennline Tunable Engine Mount for the 991 offers the ultimate in adjustability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive.

Our mounts are CNC machined from billet aluminum and include three sets of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilize the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.

YELLOW - Street 75A Polyurethane
BLUE - Aggressive street/track 85A Polyurethane
RED - Full Race  95A Polyurethane