后扰流板/翼型件

4" eRam Kit™ electric wing system for 996 Turbo
Fast version that creates very good downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-4-S

您正在查看的产品与这些编号存在交叉引用关系

Air intake.



Fits:
Porsche 996 Turbo 2001-05

Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P996.10.3000

您正在查看的产品与这些编号存在交叉引用关系

Air Ram for 996 GT3 / GT3 RS rear spoiler.



Fits:
Porsche 996 MK2 GT3 or GT3 RS rear spoilers from 2002-2004

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Aluminium Black Mesh 'Diamond' Style - Mesh size: 100cm x 40cm Universal Product

Product description:

- Piece of powder coated mesh grill in size 100cm x 40cm
- Brand new product as shown in the photo below
- Hole size: 6mm x 4mm
-Thickness: 2mm
- Ideal for mounting in Bumpers, Bonnet intakes etc.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99950555555

您正在查看的产品与这些编号存在交叉引用关系

Bi-Plane Rear Spoiler Type GT for improved down force and aerodynamics. 997.2 Turbo Aerokit Look spoiler.
Made from high grade GRP material.
Does not include fixings and 3rd brake light. Reuses the existing stop light.

Fits:
Porsche 996 Carrera (not for Cabriolets)
Porsche 996 C4S* 
* It is possible to fit this on C4S model but you will need to remove the centre reflector. The lid will not follow the curves of the rear indicators (bottom red section) like the reflector does.


This is a fibre glass after market products and will require preparation before fitting.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651222196GRP

您正在查看的产品与这些编号存在交叉引用关系

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK-BOOTS

您正在查看的产品与这些编号存在交叉引用关系

Grille insert for 996 Duct tail



Fits:
Porsche 996 1998-05 fitted with P996 Ducktail

The vanes were angled to be as non-restrictive as possible to the air path into the engine bay. This means that the engine and air inlet are essentially open when viewed from the front but closed when viewed from the rear, which is good to keep falling leaves out.

The material we chose for the grille was ASA (Acrylonitrile-styrene-acrylate) which prints neatly and can withstand prolonged temperatures of up to 100C. This is more than any engine grille should ever see unless the engine is on fire. In terms of toughness it's on par with ABS but has the added benefit of being UV resistant.

Prevent spoiler warning MicroModule Device

Fixed wing or spoiler warning issues ? MicroModule Device™ is a great solution for 996 Turbo owners that have a FIXED WING or get the dreaded Spoiler Warning. For Turbos with integrated decklid and wing like the aerokit wing or other aftermarket wings. The MicroModule Device™ is easily hooked up to the factory wiring and PREVENTS all instances of the SPOILER WARNING. Less expensive than a new GT2 or GT3 lid wiring harness. Full set of illustrated step by step instructions emailed with order.

NOTE:  Included with every Rennkit eRam Kit.

Fits:
Porsche 996 Turbo 2001-2005




相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

Micro-M

您正在查看的产品与这些编号存在交叉引用关系

Rear deck lid moulding.



Fits:
Porsche 996 GT3 1999-02

Click 'Zoom in' for large parts diagram.
Diagram ref no 28

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651298500

您正在查看的产品与这些编号存在交叉引用关系

Rear Duck Tail (Ducktail) Spoiler. This spoiler will accommodate to re-fit the original C4S Centre reflector.

Material: Fibre Glass



Fits:
Porsche 996 C4S 2001-05 Coupe only
(will not fit 996 Turbo or Standard 996)

Note: Requires 3rd brake light 99763105201 - bought separately

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 Turbo

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler with 3rd brake light hole
Material: Fibre Glass



Note: Requires 3rd brake light 99763105201 - bought separately

Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) Spoiler.
WITHOUT hole for 3rd brake light
Material: Fibre Glass



Fits:
Porsche 996 1998-05
(will not fit 996 Turbo or 996 C4S)

Please note: As most fibre glass panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear Duck Tail (Ducktail) RS style Porsche 996 (Not Turbo, GT3 or GT2)

O/E fitment Porsche 996 Ducktail Spoiler. Ducktail can be fitted in 10 minutes and subtly transforms the look of you 996.  These come in raw finish and will require priming and painting. Any marks, blemishes or imperfections should be dealt with prior to applying primer and topcoat.

These spoilers weigh approximately 1.8kg more than the original flat deck lid without the Ducktail.

Disclaimer: By completing the purchase of this part, you accept all responsibility for any damage caused during the fitting or finishing process.  

Fits:
Porsche 996 1998-05
Not Turbo, GT3 or GT2

Please note: As most after market panels, this spoiler requires extra work prior to painting in order to ensure satisfying final effect. Gaps between body will need to be filled and dry fitting before painting is recommended.

Rear spoiler / Rear wing. Porsche 911 (996)

• Vehicle-specific TÜV parts certificate
• Mounting accessories, if required
• assembly Instructions
• Rear spoiler is made of the innovative and high-quality material
• Uniform surface structure allows painting without much preparatory work (Product is not painted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear spoiler fits Porsche 911 996 1997-2006 for variant Coupe (six parts, does not fit the Turbo, Carrera 4S, GT2)

• Currently, no TÜV approval,
• Mounting hardware, if necessary
• installation Instructions

• The angle adjustable rear wing paintable fiberglass (no carbon).
• Engine covers, cover incl RAM AIR system for better supply of fresh air - noticeably more power and higher top speed
• Improved aerodynamic properties and freely selectable pressure
• Wing has six parts

• Rear spoiler is manufactured from high quality fiberglass material.
• Excellent surface structure allows simple and inexpensive painting (Product is not painted).
• Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear wing.


Fits:
Porsche 996 GT2 >>2003

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651226130G2X

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler air intake, outer. Primed.



Fits:
Porsche 996 GT2 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651232

您正在查看的产品与这些编号存在交叉引用关系

2" eRam Kit™ electric wing system for 996 Turbo
Up/Down Speed of 5 sec.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-2-SS

您正在查看的产品与这些编号存在交叉引用关系

3" eRam Kit™ electric wing system for 996 Turbo
The fast version that creates good downforce, wing looks great when up. Closest factory height version for Coupe or Cabriolet.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-3-S

您正在查看的产品与这些编号存在交叉引用关系

4.75" eRam Kit™ electric wing system for 996 Turbo
Highest electric wing lift Kit™ possible - Similar height to GT3 and GT4 wings, provides the ultimate Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 996 Turbo 2001-2005

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK6-475-S

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler GT3 Cup . 
The rear spoiler is made from fiberglass (lightweight parts)



Fits:
Porsche 996 Carrera 2 / Carrera 4

Rear spoiler 996 Cup / Supercup with adjustable wing (12 positions).

Including thread inserts for hinges and powder coated wing uprights and side wings.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TK356a

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler GT3 R / Le Mans
The rear spoiler is made from fiberglass (lightweight parts)



Fits:
Porsche 996 Carrera 2 / Carrera 4

Rear spoiler 996 GT3 / Cup "Le Mans" with adjustable wing (12 positions).

Including thread inserts for hinges and powder coated wing uprights and side plates.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TK356b

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler II GTS for Porsche 996 Turbo/GT2

BRAND: Techart

Rear spoiler II GTS unit with adjustable deck lid integrated air intakes and adjustable gurney in Carbon.

Fits:
Porsche 996 Turbo/GT2


Please note this item is not a stock product. It is a special order part and once ordered with us is not subject to cancellation or return unless proven not fit for purpose or defected.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

096100885009

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler lip.


Fits:
Porsche 996 GT3 MKI >>2002

Click 'Zoom in' for large parts diagram.
Diagram ref no 30

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651298800

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler pump bracket.



Fits:
Porsche 996 Turbo 2001-05

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651291700

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler Rubber Wall.
please note you may also require new clips order 2 x part number 99959171240

Fits:
Porsche 996 Carrera 1998-05
Porsche 997 Carrera MKI 2005-08
Porsche 997 Carrera MKII 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 5.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651225000

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler for Porsche 911 996 1997-2006
for model / body variant (s) Coupe,
not suitable for Convertible, GT 2, Turbo and 4S

Wing is six parts
Suitable only in combination with add-on parts HSK996RS, KOT007, KOT008, SS996LRS, SS996RRS, ZB072.

• Incl. Mounting accessories, if necessary
• Rear spoiler is made of high quality material GFK
• Uniform surface structure allows painting without much preparation (product is unpainted)
• Material is flexible
•Currently no TÜV certificate, therefore individual approval according to §21 StVZO required

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Rear spoiler, prime-coated.


Fits:
Porsche 996 Carrera (1998 to 2004)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651290300G2X

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler.


Fits:
Porsche 996 GT3 1999-01 for Supercup Cars

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651299199G2X

您正在查看的产品与这些编号存在交叉引用关系

Produces more down force. Rear spoiler motorsport airduct. carbon fibre look. fits onto the middle section of 996 GT3 MKII rear lid 2002>>. Bolt on type.

Fits:
Porsche 996 2002>>

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Replica rear spoiler & boot lid. made to look like 996 GT2 rear spoiler. made from epoxy resin for higher strength. Made with OE hinges so it allows the top wing to tilt.



Fits:
1. Porsche Original 996 Carrera - Coupe
2. Porsche Original 996 C4S - Coupe
3. Porsche Original 996 Turbo - Coupe


Material:
Made from Fiber Glass. GRP

Product Type:
Replica

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

996512996

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler Replica GT3 MK1 for all 996 1997-08/2001, not cabrio models. This is a complete rear lid spoiler.

Fits:
Porsche 996 1997-08/2001

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651226011

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler/Aerofoil GT3 MKII. Porsche 996 >>2004, not cabrio models. This is a complete rear lid spoiler. ORGINAL PORSCHE

Fits:
Porsche 996 1997-04

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651290193G2X

您正在查看的产品与这些编号存在交叉引用关系

Rear Spoiler/Aerofoil GT3 MKII. Porsche 996 >>2004, not cabrio models. This is a complete rear lid spoiler.

Fits:
Porsche 996 1997-04

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

SpeedArt CS rear spoiler mounts on to the original standard rear spoiler. rear spoiler for Targa and Coupe models.

Fits:
Porsche 996 1997-04

Material:
Made from Fiber Glass. GRP

Product Type:
SpeedArt Replica

Turbo look rear spoiler. fits standard body 996 Carrera C2/C4 or 996 C4S. This spoiler will be in the fixed rised postion.

Fits:
Porsche 996 1997-04

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Special order product please allow about 14 days for delivery.

Rennline engine lid spoiler carbon fibre. 



Fits:
Porsche 996 Carrera 2 / Carrera 4 - 1997 to 2005
Porsche 996 C4S - 2001 to 2005

Product Description

Rennline’s new ducktail spoiler is a great way to give your 996 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality hand laid carbon fiber using state of the art manufacturing techniques for a factory fit and finish.

• High quality construction, using the latest technologies
• Carbon Fiber is hand laid with a high gloss UV protectant finish
• CAD designed using 3D scans of the factory decklid
• Uses pre-installed industrial grade 3M VHB adhesive to install
• OEM fit and finish

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E359

您正在查看的产品与这些编号存在交叉引用关系