歧管/集管

Exhaust bolt repair kit for Boxster / 996 / 997 Carrera & Cayman Gen1 1997- 2009 (Not GT3, GT2 or TT engines)



With more and more broken exhaust bolts reported on the water-cooled engines, the headache of repairing a broken bolt is becoming epidemic. Tasks ranging from a simple exhaust system update through an engine removal, are consistently plagued by snapped, rusted, and broken exhaust manifold bolts. Rarely can an accurate removal of the broken bolt be performed with the engine in the car, and even after removal, the task is time consuming and if not done carefully can lead to a damaged head or faulty repair. STOMSKI RACING's answer to these problems is the SR067, a kit that easily, accurately, and flexibly allows you to drill out the broken bolts - with the engine still in the car- saving time and headaches. A CNC milled plate indexes precisely off the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR067 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR067 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with an included M8x1.25 tap.

Kit includes : anodized aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case.

Now also includes our SR065D drill guide.

这些钛部件具有防锈和耐腐蚀的特性，而这可能是传统钢螺柱和螺母的常见问题。这种耐腐蚀性可确保螺柱和螺母保持完整性，从而在必要时轻松拆卸和安装。对于需要轻松使用车辆排气系统的保时捷爱好者来说，它们是完美的升级。

#罗勒#

• 超高性能产品
• 采用钛Ti6Al4V技术

包含18 个螺柱、螺母和垫圈

适合：
保时捷 996 Turbo / GT3 / GT2
保时捷 997 Turbo / GT3 / GT2
保时捷 997.2 全部
保时捷 991 全部
保时捷 992 全部
保时捷 987 2009-12
保时捷 981
保时捷 718 GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TITANSTUDS18

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Manifold / Header Equal Length DesignTek K16 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers.K16 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with the OEM K16 turbochargers. The short design is perfectly matched for the exhaust travel from the heads to the K16 turbo for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 14 HP and 16 Ft. TQ with no other modifications.Adds up to 14 HP / 16 Ft. TQ
All Stainless steel construction.
Mandrel bent short primary tubes.
Flowed Pyramid merge collector.
Designed specifically for cars fitted with OEM size K16 Turbos

Fits:
Porsche 996 Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309603

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Manifold / Header Equal Length DesignTek K24 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers. K24 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with upgraded K24 turbochargers. The medium length and 41.5 mm primary tube diameter design is perfectly matched for the exhaust travel from the heads to the larger turbochargers for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 17 HP and 20 Ft. TQ with no other modifications.

Fits:
Porsche 996 Turbo S /GT2 /X50

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309604

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Manifold / Header Equal length manifolds with larger 45mm bore the standard original ones are normally 38mm



DesignTek Predator High Grade stainless steel equal length headers. Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with the factory turbo chargers. The short design is perfectly matched for the exhaust travel from the heads to the turbos for better boost response and power throughout the rev range.
The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 14 HP and 16 Ft. TQ with no other modifications.

- All T304 Stainless Steel construction
- Mandrel bent short primary tubes
- Flowed Pyramid merge collector
- Designed specifically for cars fitted with Factory Turbos

Fits:
Porsche 997 Turbo
Porsche 997 GT2 Turbo
Porsche 996 K16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309705

您正在查看的产品与这些编号存在交叉引用关系

DesignTek Stainless Steel Exhaust Manifold / Header Equal Length.



Fits:
Porsche 996 Turbo
Porsche 997 Turbo MKI

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606309708

您正在查看的产品与这些编号存在交叉引用关系

Titanium exhaust manifold bolts M8x27. Torx head.
Pack of 18 pcs.



Fits:
Porsche 996 Turbo / GT2 / GT3 1999-2005
Porsche 997.1 Turbo / GT2 / GT3 2007-2009
Porsche 997.2 Turbo / GT2 RS / GT3 2010-2013

Porsche 991 Turbo / Turbo S / GT2RS  2014-2020

Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

TITANTORXLONG18

您正在查看的产品与这些编号存在交叉引用关系

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-In-18

您正在查看的产品与这些编号存在交叉引用关系

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

SL-Ti-18

您正在查看的产品与这些编号存在交叉引用关系