后侧车顶支架
Stock rubber rear shock mounts deflect under load and distort suspension settings, leading to poor tire wear, poor grip, poor handling, and slower laps times.
STOMSKI RACING's 996/997 Rear Shock Monoball Mounts ensure that your tire investment is optimized, providing for the best grip, the best handling, and the fastest lap times.
CNC machined from aircraft quality aluminum and anodized for great looks and protection, STOMSKI RACING's Rear Shock Monoball Mounts deliver maximum range, the most precise tuning, the smoothest suspension travel, the easiest and the most accurate adjustment for your car.
STOMSKI RACING SR120's reconfigured geometry automatically allows for lowering of 16mm (.625") compared to factory mounts. Include the finest quality aerospace monoballs available, as well as stainless steel hardware.
Available with 12mm or 14mm stainless steel bushings.
Two complete mounts included per set.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
SR120
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
Fits:
Porsche 997.1 / 997.2 2005-12
These shock mounts use high strength hardened steel spherical bearings and are direct replacements for the factory mounts. The Teflon lined spherical bearings used in our kit are maintenance-free and require no supplemental lubrication. Included seals prevent contamination from water or grime, thus extending bearing life.
Porsche used spherical bearings on the 997 GT3 and Cup Cars. We went one step further and added larger bearings and weather-seals to ensure longevity.
Fully Weather Sealed
We've designed in weather seals to keep dirt out and extend product life. This is the only shock mount suitable for street or extended track use. Dirt and water contaminate ordinary products and accelerate wear.
Improved Shock / Coilover Performance
The spherical bearings pivot freely and eliminate the deflection that is inherent with the factory rubber bushings. This is important because:
The factory rubber acts as a spring in series with the shock. This rubber spring-action is completely un-damped and reduces the shocks ability to control the tire contact patch. The spherical bearing allows the damper to do its job and control the contact patch.
These will work with stock springs and coilovers.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2152213
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
SET OF TWO
Fits to OE Part Numbers: 99733306100 / 99733306101 / 99733306102 / 99733306103
Fits:
Porsche 997 GT2, GT3, GT3RS
Porsche 997 inc. Turbo
Fits to No. 2 on the diagram.
Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-830
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
SET OF TWO
Fits to OE Part Numbers: 99733306100 / 99733306101 / 99733306102 / 99733306103
Fits:
Porsche 997 GT2, GT3, GT3RS
Porsche 997 inc. Turbo
Fits to No. 2 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
PFR57-830BLK
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
1 kit required per axle
Fits
Porsche 986 Boxster - Front and Rear
Porsche 987 Boxster - Front and Rear
Porsche 987 Cayman - Front and Rear
Porsche 996 - Front Only
Porsche 997 - Front Only
Cartridges install easily to replace rubber bushings for 996/997/Boxster/Cayman. An excellent alternative to our QuickChange Camber Plates for cars that don't need more camber but still want the handling precision of a spherical bearing monoball. Spherical bearings improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings.
Eliminating Deflection Is Important For Two Reasons
• The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.
• The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
2011002
您正在查看的产品与这些编号存在交叉引用关系
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
使用高性能后顶置支架增强您的保时捷后悬架:技术规格和优势
高性能后悬架顶部支架的技术规格:
- 性能后悬架上支架(也称为支柱支架或轴承板)是将后悬架支柱连接到保时捷底盘的部件。
- 它们是专为保时捷汽车的后悬架系统设计的。
- 性能后顶支架由铝合金或增强橡胶等高品质材料制成。
- 与标准支架相比,它们具有更坚固的结构和改进的设计,从而提供了增强的性能、耐用性和操控特性。
- 高性能后悬架上支架可作为保时捷车辆的售后升级或标准替换件。
升级或更换保时捷性能后悬架顶部支架的好处:
改进的后悬架性能:性能后上支架提供了更高的刚性和精度,增强了后悬架在转弯、加速和制动时的性能和响应能力。
增强的稳定性和控制力:升级到性能支架可提高后悬架的整体稳定性和控制力,提供更自信、更沉着的驾驶体验。
降低噪音、振动和声振粗糙度 (NVH):更坚固的后顶部支架有助于最大限度地减少传输到底盘的不必要的振动和噪音,从而带来更平稳、更舒适的乘坐体验。
精确的校准调整:性能后顶部支架可进行精确的校准调整,优化后悬架几何结构,从而改善轮胎磨损、牵引力和转弯性能。
提高耐用性:高性能后顶支架旨在承受更高的负载,与标准支架相比,具有更高的耐用性,即使在苛刻的驾驶条件下也能确保长使用寿命。
在 Design911,我们专门为您的保时捷提供合适的零件和专业建议。我们提供专为保时捷车型设计的各种高性能后悬架上支架,包括售后升级和 OEM 更换。我们知识渊博的团队可以根据您的保时捷车型、年份和特定的后悬架要求帮助您选择合适的后悬架上支架。我们了解在性能和舒适性之间找到适当平衡的重要性,我们可以指导您选择最适合您需求的最佳上支架。凭借我们的专业知识和对客户满意度的承诺,我们可以帮助您提高保时捷后悬架的性能、操控性和整体驾驶体验。立即联系我们,享受我们的全面支持并获得根据您的要求量身定制的高质量零件。
- 支撑架
- 防侧翻稳定杆
- 前控制臂
- 后控制臂
- 前悬挂连接杆
- 后悬挂连接杆
- 发动机支架
- 变速箱座
- 前侧车顶支架
- 转向横拉杆
- 前副车架
- 后副车架
- 气动升降系统
- 悬架控制单元
- 防翻架
- Bilstein B14 PSS 避震悬架套件
- Bilstein B16 PSS9/10 高度减震可调避震悬架套件
- Bilstein B16 DampTronic (PASM)
- Bilstein EVO SE
- Ohlins 道路及赛道悬架
- Powerflex 聚氨酯衬套
- Powerflex 黑色系列衬套
- H&R 可调悬架套件
- H&R Cup-Kit 系列运动悬架
- KW 变体 1 Inox 悬架套件
- KW 变体 2 Inox 可调回弹减震悬架
- KW 变体 3 Inox 可调悬架套件
- KW Clubsport 避震悬架套件
- KW Clubsport 避震悬架套件(带车顶支架)
- KW HLS(液压升降系统)
- Eibach Pro-Tronic PASM 拆卸套件
- Sachs 高性能悬架 CSS
- Nitron 汽车系列