发动机罩/锁及锁扣

Rear Lid Grille.



Fits:
Porsche 997 TURBO MKI
Porsche 997 TURBO MKII

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711017

您正在查看的产品与这些编号存在交叉引用关系

3" eRam Kit™ electric wing system for 997 Turbo
Closest height version for Cabriolet

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-3-S

您正在查看的产品与这些编号存在交叉引用关系

4.8" eRam Kit™ electric wing system for 997 Turbo
Similar height to GT3 and GT4 wings, provides Superior Downforce.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-4.8-S

您正在查看的产品与这些编号存在交叉引用关系

4" eRam Kit™ electric wing system for 997 Turbo
Creates very excellent downforce, wing looks great when up.

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-4-S

您正在查看的产品与这些编号存在交叉引用关系

Switch Panel. Black.



RHD Cars.

Fits:
Porsche 987 Boxster
Porsche 997 C2 / C4 / C4S
Porsche 997 Turbo / GT2
Porsche Cayman

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99755101905A03

您正在查看的产品与这些编号存在交叉引用关系

DUST & MOISTURE BOOTS
Rubber boot set to protect your eRam Kit™ investment.

Fits:
Porsche 996 Turbo 2001-2005
Porsche 997 Turbo 2007-2009
Porsche 997 Turbo 2009-2013

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK-BOOTS

您正在查看的产品与这些编号存在交叉引用关系

Engine compartment blower.



Fits:
Porshe 997 Gen1 Carrera cars with Aerokit spoiler (IXAA)
Porshe 997 Gen2 Carrera cars with Aerokit spoiler (IXAA)
Porshe 997 Gen1 Turbo
Porshe 997 Gen2 Turbo
Porsche 997 GT2 2007-10
Porsche 997 GT3 2007-10
Porsche 997 GT2 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99762405605

您正在查看的产品与这些编号存在交叉引用关系

Fixed position rear spoiler rams, the height can be manually adjustable. 

Fits:
Porsche 997 turbo - 2007 to 2012

Replace the often faulty, rear spoiler hydraulic rams with these fixed and adjustable spoiler mounts.

Made from 6061 billet aluminium these mounts are adjustable from fully down to a rise of 4 inches, in increments of 0.5 inch
Easily and quickly adjustable in a couple of minuets

Kit includes:
Instructions to disable OEM spoiler rams 
Left and Right fixed spoiler mounts 
Stainless steel hardware kit

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751295100

您正在查看的产品与这些编号存在交叉引用关系

发动机罩和行李箱开启开关面板的导销。

已售出 - 每辆车需要 2 个



适合：
保时捷 986 Boxster - 2001 年至 2004 年
保时捷 987 Boxster - 2005 年至 2012 年
保时捷 987 Cayman - 2006 年至 2012 年
保时捷 996 C2 / C4 / C4S - 1998 年至 2005 年
保时捷 996 Turbo - 2001 年至 2005 年
保时捷 996 GT3 - 1999 年至 2005 年
保时捷 997 - 2005 年至 2012 年
保时捷 997 Turbo - 2007 年至 2012 年
保时捷 997 GT3 - 2007 年至 2011 年

单击“放大”查看大零件图。
图表参考号 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99655187300

您正在查看的产品与这些编号存在交叉引用关系

Rear lid additional gasket.



Fits:
Porsche 997.1 Turbo 2007-09
Porsche 997.2 Turbo 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751271100

您正在查看的产品与这些编号存在交叉引用关系

Rear lid gasket.



Fits:
Porsche 997.2 Special model "911 Sport Classic"
Porsche 997.1 Turbo 2007-09
Porsche 997.2 Turbo 2010-13
Porsche 997 GT3 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751261101

您正在查看的产品与这些编号存在交叉引用关系

Rear lid grille



Fits:
Porsche 997 Carrera 2005-08
Porsche 997 GT3 / GT3 RS 2007>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99704480

您正在查看的产品与这些编号存在交叉引用关系

Rear lid hinge.



Fits:
Porsche 997.1 Carrera 2005-08
Porsche 997.2 Carrera 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751291100

您正在查看的产品与这些编号存在交叉引用关系

Rear Lid Lock. Lower Part.



Fits:
Porsche 997 Carrera 2005>>
Porsche 997 Turbo 2007>>
Porsche 997 GT3 / GT3 RS 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751205301

您正在查看的产品与这些编号存在交叉引用关系

Rear Lid Stop Buffer.



Fits:
Porsche 996 Turbo 2001-05
Porsche 997 2005-08 Cars with Aerokit Cup
Porsche 997 Special model '911 Sport Classic' 2009-11
Porsche 997 Turbo / GT2 2007>>
Porsche 996 GT3 1999-05
Porsche 997 GT3 / GT3 RS 2007-11
Porsche 991 GT3 2014>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99651298700

您正在查看的产品与这些编号存在交叉引用关系

2" eRam Kit™ electric wing system for 997 Turbo
Up/Down Speed of 5 sec
NOT RECOMMENDED FOR CABRIO

Do not risk Pentosin® Power Steering fluid leaks into your engine bay or down the bumper. Extensively designed and engineered to permanently fix the overly complex and troublesome factory hydraulic mechanism. Since 2015, our eRam Kit™ is the best permanent economical solution to maintain a fully functional wing!

The dealer wants up to £1000's to replace a troublesome hydraulic mechanism. Others offer a rebuild service, simply tearing down and repairing the same failure prone mechanism, often using solvents to swell internal o-rings. Another offers shiny aftermarket parts for the internal hydraulic mechanism made from stainless instead of brass. They do not even attempt to call it a permanent solution, claiming it is "easy" to change out cheap internal o-rings to refill and bleed the mechanism when it fails again… Who wants to go through that EVER let alone more than once? It is only a matter of time until hot engine bay conditions destroy one of many hydraulic components that are failure prone!
The eRam Kit™ wing elevator consists of two pre-assembled self-contained electric Rams that simply bolt onto the engine lid with absolutely NO modifications. The eRam Kit™ includes a small electronic "MicroModule Device™" that connects to the factory wiring and prevents the dreaded SPOILER WARNING. Nearly plug and play! WORKS EXACTLY LIKE THE FACTORY MECHANISM.

The patented eRam Kit™ comes with two self-contained electric eRams, all fittings, fasteners, electrical connections, and the tiny MicroModule Device™ which prevents the spoiler warning. No cutting, drilling or modification to any part of the car. Easy install – about the same skill level as changing brake pads. Installation of the eRam Kit™ takes about 2 hours for anyone with any mechanical skill. Most customers install the eRam Kit™ themselves using our illustrated instruction guide and video (sent with purchase). Easily maintained – no special tools needed. Easily modified – for example to exchange for different length rams or to add Dust & Moisture Boots.

Fits:
Porsche 997 Turbo

Click 'Zoom in' for large parts diagram.
Diagram ref no 2 (LEFT) & 3 (RIGHT)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

EK7-2-SS

您正在查看的产品与这些编号存在交叉引用关系

Rear spoiler electric rams pump Porsche 997TT



Fits:
Porsche 997 Turbo



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99751294300

您正在查看的产品与这些编号存在交叉引用关系

Retaining washer for rear lid lock.



Fits:
Porsche 997.1 GT2 2007-09
Porsche 997.1 Turbo with Aerokit 2007-09
Porsche 997.2 GT2 2010-13
Porsche 997.2 Turbo with Aerokit 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 16

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90011600203

您正在查看的产品与这些编号存在交叉引用关系

Rubber stop for rear lid.




Porsche 968 3.0 06/91-11/95
Porsche 991 3.4-3.8 12/11-07/13
Porsche 996 3.4-3.6 09/97-08/05
Porsche 997 3.6-4.0 07/04-12/12
Porsche 981 Boxster 2.7-3.4 04/12-07/13


Porsche 911 2.7-3.3 08/73-07/89
Porsche 928 4.7-5.4 08/83-11/95
Porsche 944 Cabrio 2.5-3.0 12/88-07/91
Porsche 968 Cabrio 3.0 06/91-07/92
Porsche 996 3.4-3.6 09/97-08/05
Porsche 997 3.6-4.0 07/04-12/12

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99970314040

您正在查看的产品与这些编号存在交叉引用关系

Sealing cap covers for rear spoiler.
25.5 x 37.0, Sold each.



Fits:
Porsche 997.2 GT2 2010-13
Porsche 997.1 GT3 RS 2007-11

Click 'Zoom in' for large parts diagram.
Diagram ref no 22

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99970301940

您正在查看的产品与这些编号存在交叉引用关系