涡轮增压器/中冷器及零件

Complete performance charge air high flow cooling kit with inlet pipes.
Full Big Pack including Inlet Hoses.



To fit:
Porsche 911 (997.1 Turbo) 2007-2009

This complete package includes Do88's motorsport grade intercooler package with carbon fibre air guides, high flow Y-pipe with all hoses and accessories for installation and the optional high flow inlet hoses.

The intercooler and y-pipe are great products individually but as a team they give great reduction of inlet air temperatures and at the same time they reduce the back pressure of the whole system; this means increased power!

Significant advantages with Do88's Porsche Performance Charge Air High Flow Kit:

• Cooler air to your engine! 38°C (52°C), do88 14°C lower than OEM parts!
• High quality high density UK made motorsport cores
• 3D freeform designed cast end tanks
• Custom designed carbon fibre ambient air guides
• Assembly air flow at 0,175bar/2,54psi pressure drop: 646CFM (564CFM), do88 15% higher!
• Post intercooler air temperature at same conditions: 38°C (52°C), do88 14°C lower!
• Y-pipe made of 70mm mandrel bent aluminium pipes
• Y-pipe smooth flow cast collector part
• Comes with high quality silicone hoses and accessories for installation
• See enlarged images for more information!

About the Intercoolers:

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

About the Y-Pipe:

Do88: At the beginning of the development process of this product we spent a lot of time thinking what would be the preferred way to build a Y-pipe and here is the result of our conclusions and development process! Our pipe has both a very good flow rate and a low weight which is achieved by combining mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then welded CNC-machined connections for bov and breather hoses.

This construction adds a lot of performance but only small amount of extra weight. Do88 Performance Y-pipe weight 1,52 kg (3,35 lb) OEM plastic pipe weight 1,38 kg (3,04 lb) and competitor cast performance pipe weight 2,76kg (6,08 lb)!

The pipes are then finished in a high quality powder coat that makes them look as good as they perform! You can choose between the more discrete semi gloss black and a fresh silver metallic finish.

About the Inlet Pipes:

Do88: It was a real challenge developing new turbo intake hoses for the 997.2 Turbo. The lack of space makes it really difficult to make a set of hoses that outflow the stock OEM plastic pipes. We achieved this and succeeded in maximising the performance but we had to make the small compromise of letting the hoses have no clearance; so they will push or rub in some non-sensitive areas. The hoses are reinforced with stainless steel wire to ensure overall durability and lasting performance.

Our self-developed intake hoses increase air flow; 26% higher than the OEM hoses. We can ensure you the sensation while driving is very different. The improvement in throttle response is immense, making the car feel so much more refined and alert. This upgrade makes it become what it should have been from the start. This is an improvement no test figures can explain, it has to be perceived behind the wheel of a 997 turbo!

Overall Performance:

Do88: When it comes to performance our big pack gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers and Y-pipe! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Please select your preferred Y-Pipe Colour from the options

Air Duct. Satin Black.



Fits:
Porsche 997 GT2 2008>> I101

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99757547

您正在查看的产品与这些编号存在交叉引用关系

Intercooler bracket.



Fits:
Porsche 997.1 Turbo 2007-09
(not for GT2 models)

Click 'Zoom in' for large parts diagram.
Diagram ref no 23

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99750425

您正在查看的产品与这些编号存在交叉引用关系

Oil intake pipe for Turbo, Cylinders 1-3.


Fits:
Porsche 997 Turbo / GT2 2007-09
Porsche 997 GT2 RS 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 17

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710732974

您正在查看的产品与这些编号存在交叉引用关系

Oil intake pipe for Turbo, Cylinders 4-6.


Fits:
Porsche 997 Turbo / GT2 2007-09
Porsche 997 GT2 RS 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710732873

您正在查看的产品与这些编号存在交叉引用关系

Oil return line for turbo.


Fits:
Porsche 997 Turbo / GT2 2007-09
Porsche 997 GT2 RS 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 36

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710721673

您正在查看的产品与这些编号存在交叉引用关系

Performance charge air high flow cooling kit.
Big pack without optional inlet hoses



To Fit:
Porsche 911 997.1 Turbo / Turbo S 2007 to 2009

This comprehensive package includes Do88's motorsport grade intercooler package with carbon fibre air guides and high flow Y-pipe with all hoses and accessories for installation.

The intercooler and y-pipe are great products individually but as a team they give great reduction of inlet air temperatures and at the same time they reduce the back pressure of the whole system; this means increased power!

Significant advantages with Do88's Porsche Performance Charge Air High Flow Kit:

• Cooler air to your engine! 38°C (52°C), do88 14°C lower than OEM parts!
• High quality high density UK made motorsport cores
• 3D freeform designed cast end tanks
• Custom designed carbon fibre ambient air guides
• Assembly air flow at 0,175bar/2,54psi pressure drop: 646CFM (564CFM), do88 15% higher!
• Post intercooler air temperature at same conditions: 38°C (52°C), do88 14°C lower!
• Y-pipe made of 70mm mandrel bent aluminium pipes
• Y-pipe smooth flow cast collector part
• Comes with high quality silicone hoses and accessories for installation
• See enlarged images for more information!

About the intercoolers:

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

About the Y-Pipe:

Do88: At the beginning of the development process of this product we spent a lot of time thinking what would be the preferred way to build a Y-pipe and here is the result of our conclusions and development process! Our pipe has both a very good flow rate and a low weight which is achieved by combining mandrel bent lightweight pipes with a high quality 3D freeform designed cast joint between them. Onto the cast part we then welded CNC-machined connections for bov and breather hoses.

This construction adds a lot of performance but only small amount of extra weight. Do88 Performance Y-pipe weight 1,52 kg (3,35 lb) OEM plastic pipe weight 1,38 kg (3,04 lb) and competitor cast performance pipe weight 2,76kg (6,08 lb)!

The pipes are then finished in a high quality powder coat that makes them look as good as they perform! You can choose between the more discrete semi gloss black and a fresh silver metallic finish.

Overall Performance:

When it comes to performance our big pack gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers and Y-pipe! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Performance intercooler upgrade kit.



To Fit:
Porsche 911 997.1 Turbo 2007-2009 and GT2RS models
Porsche 911 997.2 GT2 RS model 2010 to 2012
Porsche 911 997.2 Turbo 2010 to 2012

A true performance upgrade intercooler kit for the 997.1 Turbo and GT2. This well thought out refined kit allows fitment of the larger later type 997.2 intercoolers onto the 997.1 model, and includes all the components and hardware necessary for a serious upgrade!

Significant advantages with Do88's Porsche Performance Intercooler Kit:

• Cooler air to your engine!
• High quality, high density UK made motorsport cores.
• 3D freeform designed cast end tanks.
• Custom designed carbon fibre ambient air guides.
• Comes with high quality silicone hoses and accessories for installation.
• See enlarged images for more information!

Do88: After our market research in the beginning of our intercooler development for the 997 generation 2 we understood that not many of the upgrade products on the market are really upgrades but more at the same level as the 997.2 standard intercoolers or sometimes even lower. For this reason we realised from the beginning we could not sacrifice anything to keep the cost down, we just had to do the best possible in the space available in the car!

First of all we carried out a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which has great cooling efficiency as well as being light weight. With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.

To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment from carbon fibre to ensure perfect fit to the vehicle integrated air guides and our intercooler. To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to designed custom silicone hoses for all positions.

The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature! Another important aspect for cooling performance is to maximise all ambient cooling air available, to optimise this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.

With the way we have chosen to build our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that it's completely made of aluminium. Our intercooler weight is 5,85 kg (12,89 lb) per piece and the 997.2 OEM intercooler weights 3,30 kg (7,27 lb) per piece. It might sound like a big weight increase but not when you compare it to similar core sized intercoolers on the market!

Included in this kit:

• Performance intercoolers
• Carbon fibre air guides
• Silicone hoses
• Hose clamps
• Rubber seals
• Installation hardware

When it comes to performance our intercooler kit gives a great reduction of the intake temperature compared to the OEM 997.2 intercoolers! See enlarged diagrams where we show data from our AIM racelogger recorded at 5 full throttle accelerations done in an immediate sequence without any cool down between 40-260 km/h (25-162 mph) in a Stage 1 tuned Porsche 997.2 Turbo PDK. In all tests the car was driven in Sport Plus, automatic gear change and AC off. First we made 5 runs with the car equipped with OEM intercooler and y-pipe then we switched to do88 performance intercoolers and y-pipe and drove car for a while, then we made 5 runs exactly the same as with the OEM parts. The temperatures are significant lower with our intercoolers which is visible in the graph!

As well as lower intake temperature our big pack also flows better than the 997.2 original intercoolers! See enlarged image showing the air flow rates at different pressure drops in the graph where we compared our big pack to the original intercooler and Y-pipe in our own Superflow SF-1020 Probench to verify the final result!

From our five in a row full throttle accelerations between 40-260 km/h (25-162 mph) we have very accurate and consistent test data for the range 50-250 km/h (31-155 mph). When analyzing the numbers, we found that in average we cut down the acceleration time for 50-250 km/h (31-155 mph) by 3 seconds compared to the OEM intercooler and y-pipe! No software programming or adaption reset was done in between the tests.

Please select which Y-Pipe you intend to install this intercooler kit with from the options.

Performance intercoolers & pressure hoses.



To Fits:
Porsche 911 997.1 Turbo and GT2. Fits both manual and auto 2007 to 2009 (phase 1)


Significant advantages with do88's Porsche Performance Intercoolers & Silicone Hoses:

• Equivalent OEM numbers, 997.110.639.00, 997.110.640.00 (ref only)
• Core Volume: 6825 cm³ (4821 cm³), do88 41% larger!
• Lower post Intercooler Air Temperature at same conditions: OEM 50°C (122°F), do88 34°C (93°F)
• See enlarged images for test data results!

These Intercoolers are constructed to deliver the best cooling efficiency during tough conditions. Exclusively manufactured in aluminium with continuous welds, they guarantees reliability and endurance when you really need it. The increased core volume improves cooling efficiency and lowers the intake air temperature. Do88 have undergone thorough testing under severe and continuous conditions to ensure the absolute best performance! These Intercoolers are immensely optimized to allow the maximum core size in the given space without compromising on easy drop-in-fitment. This is the undoubted choice for the inspired enthusiast or the race car driver demanding reliability at the limit.

This package is supplied with everything you need for fitment, including Silicone Hoses, Screws, Brackets and Clamps.

The Boost Pressure Hoses included in this Kit are Silicone reinforced 4 ply polyester fabric for optimum airflow, performance and reliability!

Please note: This is a special-order item, once ordered cannot be cancelled.

Porsche 911 (997) GT2 Twin Turbos - Stage 1 - MD516 & MD517 [650-675 bhp]

MD516 & MD517 Stage 1 Twin Hybrid Turbos feature:
• Specially modified high flow BorgWarner K24 Compressor Wheels featuring the latest extended tip techology
• Compressor cover profile re-profiled to suit larger compressor wheels
• Turbochargers fully blueprinted to motorsport standards
• Estimated Power Output: 650-675bhp*

MD516 & MD517 Twin Hybrid Turbochargers fit:

Porsche 911 GT2 (997) 3.6 litre 523 bhp, engine code 997 Top, year 2007 onwards, OEM number 99712307776
MD516 & MD517 turbos are a direct replacement for 5304-970-0080 & 5304-970-0081.

These Hybrid Turbos must be fitted as a pair.

*Please Note: Our hybrid turbochargers require exact engine management settings and/or supporting modifications to achieve these horsepower figures.


All Turbochargers are built to order and are usually despatched in 7 working days.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

MD516MD517

您正在查看的产品与这些编号存在交叉引用关系

保时捷 911（997）双涡轮增压 - 第 1 阶段 - MDX472 & MDX473 [575-600 马力]

这是基于修改您现有的涡轮增压器。

MDX472 和 MDX473 第 1 阶段双混合涡轮增压器特点：
• 经过特别改装的高流量 BorgWarner K26 压缩机叶轮
• 压缩机盖重新设计以适应更大的压缩机叶轮
• 涡轮增压器完全按照赛车运动标准设计
•预计输出功率：575-600bhp*

Turbo 受益于 Hybrid Turbos 自己设计的铝坯压缩机叶轮。如果使用得当，坯料不仅比原来的铸铝叶轮具有显著提高的强度和耐用性，而且还可以用于减轻叶轮重量。更轻的压缩机叶轮将更快地旋转，从而使涡轮增压器响应更好，这意味着涡轮迟滞减少。铝坯压缩机叶轮比原来使用的铸件轻 20%。

MDX472 和 MDX473 双混合涡轮增压器适合：
保时捷 911 Turbo，发动机代码 997，年份 2006 年和 2010 年，OEM 编号 99712301476
MD472 和 MD473 涡轮增压器可直接替换 5304-970-0060 和 5304-988-0060。

这些混合涡轮增压器必须成对安装。

*请注意：我们的混合涡轮增压器需要精确的发动机管理设置和/或支持修改才能实现这些马力数字。


所有涡轮增压器都是按订单生产的，通常在 7 个工作日内发货。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

MDX472MDX473

您正在查看的产品与这些编号存在交叉引用关系

Radiator intercooler, Left.



Fits:
Porsche 997.1 Turbo 3.6L

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711063900

您正在查看的产品与这些编号存在交叉引用关系

Radiator intercooler, Right.



Fits:
Porsche 997 Turbo 3.6L

Click 'Zoom in' for large parts diagram.
Diagram Ref No 1.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99711064000

您正在查看的产品与这些编号存在交叉引用关系

Round seal intercooler. 

Fits:
Porsche 955 Cayenne turbo - 2003 to 2006
Porsche 996 turbo / GT2 - 2000 to 2005
Porsche 997 turbo / GT2 - 2005 to 2012

Click 'Zoom in' for large parts diagram.
Diagram ref no 39

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

95511072100

您正在查看的产品与这些编号存在交叉引用关系

Sensor boost pressure.



Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 997 Turbo / GT2 / GT2 RS 2007-11
Porsche 997 Turbo / Turbo S 2010-13
Porsche 955 Cayenne Turbo 4.5L V8 2003-06
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 958 Cayenne Turbo 4.8L 2011>>
Porsche 970 Panamera Turbo 4.8L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99660618000

您正在查看的产品与这些编号存在交叉引用关系

Sensor boost pressure.



Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 997 Turbo / GT2 / GT2 RS 2007-11
Porsche 997 Turbo / Turbo S 2010-13
Porsche 955 Cayenne Turbo 4.5L V8 2003-06
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 958 Cayenne Turbo 4.8L 2011>>
Porsche 970 Panamera Turbo 4.8L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99660618000

您正在查看的产品与这些编号存在交叉引用关系

Sensor boost pressure.



Fits:
Porsche 996 Turbo / GT2 2001-05
Porsche 997 Turbo / GT2 / GT2 RS 2007-11
Porsche 997 Turbo / Turbo S 2010-13
Porsche 955 Cayenne Turbo 4.5L V8 2003-06
Porsche 957 Cayenne Turbo 4.8L V8 2007-10
Porsche 958 Cayenne Turbo 4.8L 2011>>
Porsche 970 Panamera Turbo 4.8L 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99660618000

您正在查看的产品与这些编号存在交叉引用关系

Stud for Turbo M8x22.



Fits:
Porsche 996 Turbo 2001-05
Porsche 997 Turbo 2007-09
Porsche 997 Turbo / GT2 RS 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 29

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

90008105901

您正在查看的产品与这些编号存在交叉引用关系

TTE670 VTG upgrade turbocharger for Porsche 997.1 TURBO

Product Highlights:

• Original BorgWarner VTG turbocharger as base part
•TTE Billet geometry improved and reinforced
•Clipped turbine
•Upgrade bearing pack
•Fitment As Original. Plug & play
•670 PS Capable
•Single parts finely balanced then components assembled and core high-speed VSR balanced
•Supplied with a balance test result document
•Proven TheTurboEngineers quality
•Made in Germany

TTE720 VTG upgrade turbocharger for 997.1 TURBO / GT2

Product Highlights:

• BWTS VTG turbocharger as base part
• Very early response
• Billet Milled TTE compressor 6+6 BLADE
• BWTS High Flow Clipped Turbine
• Plug and Play installation
• 700 PS Capable
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany

TTE750 VTG upgrade turbocharger for Porsche 997.1 TURBO

Product Highlights:

• Original BWTS VTG turbocharger as base part
• Very early response
• TTE Billet Milled compressor wheel
• BWTS Clipped turbine
• Plug and Play installation (with larger turbo intakes)
• 750 PS Capable
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany

TTE800 VTG upgrade turbocharger for Porsche 997.1 Turbo / GT2

• Original BWTS VTG turbocharger as base part
• Very early response
• TTE Billet Milled compressor wheel
• BWTS Clipped blade Turbine
• 800 PS Capable
• Plug and Play installation (with larger turbo intakes)
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany

Turbo Charger Sport 997 Turbo K-04/K-26

Variable geometry turbocharger (VTG) is designed to allow the effective A/R ratio of the turbo to be altered as the conditions change. This is done as the optimum A/R at low engine speeds is very different to the optimum at high engine speeds. By altering the geometry of the turbine housing as the engine accelerates, the turbo's A/R ratio can be maintained at its optimum. Because of this, our VTG turbochargers have almost no lag, have a low boost threshold and are very efficient at higher engine speeds.

This set should only be fitted by engine builders or tuners as other performance parts may be required

Fits:
Porsche 997 Turbo

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Turbocharger breather line, Cylinders 4-6.



Fits:
Porsche 997.1 Turbo 3.6L 2007-09
Porsche 997.2 GT2 RS 3.6L 2010-13

Click ' Zoom in' for large parts diagram.
Diagram ref no 24

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710724076

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger coolant line, return line.



Fits:
Porsche 997 Turbo 3.6L 2007-09
Porsche 997 GT2 RS 3.6L 2011

Click 'Zoom in' for large parts diagram.
Diagram ref no 13 (Cyl 1-3) or 14 (Cyl 4-6).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710607

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger oil tank container.



Fits:
Porsche 997.1 Turbo 2007-09
Porsche 997.2 GT2 RS 2011>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 45

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710732672

您正在查看的产品与这些编号存在交叉引用关系

涡轮增压器操作杆。

#保时捷#

适合：
保时捷 997 Turbo / GT2 2007-09
保时捷 997 Turbo / GT2 RS 2010-13

单击“放大”可查看大部件图。
图表参考编号 46

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99712312

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger pressure line, Cylinder 1-3.



Fits:
Porsche 997.1 Turbo 3.6L 2007-09
Porsche 997.2 GT2 RS 3.6L 2010-13

Click 'Zoom in' for large parts diagram.

Diagram ref no 20

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710721979

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger pressure line, Cylinder 4-6.



Fits:
Porsche 997.1 Turbo 3.6L 2007-09
Porsche 997.2 GT2 RS 3.6L 2010-13

Click 'Zoom in' for large parts diagram.
Diagram ref no 19

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99710722078

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger water pump.



Fits:
Porsche 997.1 Turbo 2007-09 (Engine 9770)
Porsche 997.2 Turbo 2010-13 (Engine 9770)

Click 'Zoom in' for large parts diagram.
Diagram ref no 35

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99762025102

您正在查看的产品与这些编号存在交叉引用关系

Standard replacement turbocharger.


BorgWarner ref no 53049980303 / 53049980304

Fits:
Porsche 911 GT2 (997) 3.6L >>2009
engine code 997 Top

REPLACEMENT
These turbos are a direct installation in replacement of your factory turbos.


Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99712307

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger.



Fits:
Porsche 911 GT2 (997) 3.6L >>2009
engine code 997 Top

Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6).

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99712307

您正在查看的产品与这些编号存在交叉引用关系

Standard replacement turbocharger.


BorgWarner ref no 53049980301 / 53049980302

Fits:
Porsche 997.1 Turbo (2007-09)

REPLACEMENT
These turbos are a direct installation in replacement of your factory turbos.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99712301

您正在查看的产品与这些编号存在交叉引用关系

Turbocharger.



Fits:
Porsche 997.1 Turbo (2007-09)

Click 'Zoom in' for large parts diagram.
Diagram ref no 1 (Left, cyl 1-3) or 2 (Right, cyl 4-6)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99712301

您正在查看的产品与这些编号存在交叉引用关系