运动消音器/消声器

中央消音器删除组件。适用于保时捷运动排气系统（带阀门）和标准 OE 系统。

#米尔泰克#

管道直径：2.26 英寸（57.50 毫米）

适合：
保时捷 911 (997.2) 3.6L 和 3.8L (C2 / C4 / S / GTS) 2009-2012 年

零件组装：
MSPO247：中央消音器删除组件

Replacement Rear sport exhaust set OE style. Bead blasted stainless steel.



Fits:
Porsche 997 II 3.6L C2 / C4 2009-
Porsche 997 II 3.8L C2S / C4S 2009-

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99722097331S

您正在查看的产品与这些编号存在交叉引用关系

DesignTek X-Pipe (primary muffler bypass) deletes the stock primary muffler and saves 6.4 lbs. from the rear of the vehicle. With a fast air flow the X-pipe increases BHP and Toque.



Made from high quality T304 14-16 gauge stainless steel, C.N.C. mandrel bent. The X-Pipe (primary muffler bypass) gives a great exotic car sound and power by about 5 decibels.

Fits:
Porsche 997 MKII

Click 'Zoom in' for large parts diagram.
3606009719 replace No 10.



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009719

您正在查看的产品与这些编号存在交叉引用关系

Rear sport exhaust set, "Super Sound", stainless steel.



Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1620613810

您正在查看的产品与这些编号存在交叉引用关系

Rear sport exhaust set, stainless steel, polished



Fits:
Porsche 997.2 3.6L - 3.8L Carrera 06/2008 - 12/2012

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1620613710

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer



Fits:
Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector.

SOUND - STRAIGHT PIPE
The straight pipe version guarantees a direct path from the engine, removing all factors which may affect the acoustic tuning

PIPE FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system.

Sports exhaust silencer cross pipe Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces rear centre exhaust silencer and side silencer. This exhaust does not come with new tail pipes. Original tips will be compatible.




Fits
2 and 4wd cars
Porsche 997 Gen 2 Carrera
Porsche 997 Gen 2 Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system

Sports exhaust silencers Porsche 997 Gen 2 Carrera and Carrera S 2009-2012
Replaces side silencers. This exhaust does not come with new tail pipes. Original tips will be compatible.



Fits Porsche 997 Gen 2 Carrera and Carrera S

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

EXHAUST VALVE - NO VALVE
The exhaust system does not include a valve and always guarantees the most impressive sound. If the standard system includes one, control of the valve by both the engine ECU and by the pilot via the specific control systems is no longer possible

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

EXHAUST SYSTEM FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves

END TIPS NUMBER AND POSITION - 2 + 2 AT THE SIDES
The tailpipes are located low down at the sides of the car. There are two tailpipes at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system