专业工具

Bock engine stand for workbench.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Porsche 986/987 Boxster
Porsche 987c Cayman

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer engine mounts. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand.
Here you get the required trestle to be able to mount the engine mount also on a workbench or the like.
We have the engine stands for all classic Porsche as well as the 3.4-3.8L waterboxers in our program.
The stand is for engine mounts with a diameter of 60mm.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6822

您正在查看的产品与这些编号存在交叉引用关系

Cam block off plate for 996 / 997 GT3



Replace your bulky factory-style cam caps with these high-quality aluminum caps when the GT3 & Turbo vario lift intake cams are replaced for static timing race cams on any of the 996/997 Mezger engines.

A direct replacement for all GT3 Cup & RSR engines and all tuner applications.

Sold as a pair/set (2).

Crankcase head stud driver for Porsche All 911 964 993 996 / 997 GT3 & Turbo Models 1965-On



Double-nutting a head stud to install it into the engine case not only takes time, but can be stressful for the threads, and can lead to variations in stud depth (unless you are extra careful when removing the double nuts). Protect your hardware investment and speed installation by using STOMSKI RACING's Head Stud Driver.

Made from black oxide finished hardened steel, this uniquely designed tool threads onto the head stud but will not clamp on to the threads, making installation faster, gentler, and more accurate.

Cylinder press for Porsche 996/997 GT3



Here is the ultimate tool to press the cylinders in and out of the water jacket on GT3, Turbo, and RS/RSR 996/997 engines.

This kit includes everything you need to safely, accurately, quickly, and conveniently perform this critical task.

Each kit contains:
• ring compressor (1 @102.7)*,
• Delrin cylinder spacers (4),
• complete stainless steel/AL press,
• aluminum cylinder bushing,
• bolts, and a sturdy storage case.

*100mm ring compressor (1) available separately.

Cylinder press for Porsche 996/997 GT3 with 100mm ring compressor



Here is the ultimate tool to press the cylinders in and out of the water jacket on GT3, Turbo, and RS/RSR 996/997 engines.

This kit includes everything you need to safely, accurately, quickly, and conveniently perform this critical task.

Each kit contains:
• ring compressor (1 @100),
• Delrin cylinder spacers (4),
• complete stainless steel/AL press,
• aluminium cylinder bushing,
• bolts, and a sturdy storage case.

DigiDix™ Digital degree wheel cam timing system for Porsche all 911 and GT3 engines



A revolution in cam timing, STOMSKI RACING's DigiDix™ - Digital Degree Wheel - provides the most accurate, easy to use degree wheel ever. No more awkward setups, questionable readings, convoluted pointers, or imprecise measurements. With DigiDix™, simply bolt the sensor/adapter to the flywheel-end of the crankshaft and secure the torsion arm. Setup time is less than one minute. You are now ready to measure crank rotation to one tenth (.1) of one degree accuracy and repeatability.

DigiDix™ includes a 3 foot cable for easy reading anywhere on the engine and fits all 911 and GT3 engines (and others by special order). Storage case included.

STOMSKI RACING - "reinventing the wheel."

Stomski Racing SR124 Engine case splitter for Porsche 911



No more hammering, chiseling, swearing, heating, prying or praying to get an 911 engine case apart. STOMSKI RACING'S SR124 ELEGANTLY and GENTLY separates the engine case halves and not only shortens the process of engine tear-down, but it also protects what doubtlessly is an expensive asset- the engine case itself. The rare #s matching early 911S sand-cast aluminum case, or the impossible to find 911 GT3 RSR case, or the early magnesium case that seems so fragile, all can NOW be protected from the threat of the block of wood and lead hammer, or the torch, or the pry-bar and chisel.
SR124 includes a CNC precision machined aluminum platform that you bolt to four head studs (ideally over #2 or #5) using the included thumbscrews. An over-sized drive-screw (stainless steel) is then threaded through the platform to mate with a high-load bearing in our specially designed rod cap that presses against the wrist pin of #2 or #5 connecting rod that is at bottom-dead-center. As you slowly use a wrench or ratchet to tighten the drive-screw, the torque of the SR124 splitter is evenly distributed through the entire crankshaft, pressing against ALL 8 main bearings. Once the slack is taken up, only GENTLE effort on the drive screw is required to split even the most belligerent of cases.
The SR124 platform is designed to work on all Mezger 911s (2.0 through 997) and includes Delrin inserts/sleeves that protect the head studs from scratches or dings.

Heat exchanger pressure tester for Porsche 996/997 Turbo/GT2/GT3



Some GT3 engines are experiencing oil-to-coolant intermixing. While there are potentially several sources of intermixing, faulty engine mounted oil-to-coolant heat exchangers are a major source. Now, with STOMSKI RACING's GT3 Heat Exchanger Tester set, you can confirm if your exchanger is faulty and needs replacing, or whether the source of the contamination is elsewhere. This set of CNC machined gauge blocks is machined from 6061 aluminum for years of service and comes complete with all gauges, seals, valves, and hardware.

Also works on the GT2 and 996/997 TT engines as well.

Engine stand for engine mount.



Fits:
Porsche 356
Porsche 911 912 F/G
Porsche 930
Porsche 914
Porsche 964
Porsche 993
Porsche 996 turbo/GT2/GT3
Porsche 997 turbo/GT2/GT3
The pickup tube is D=60mm in outer diameter

Reference numbers:
00072120100, 000.721.201.00, 000 721 201 00, P201

For the revision of your Porsche engine, we offer this engine mount. The flange surface with your cantilevers to the mounting axis allows a secure and at the same time easily accessible attachment of the engine to a rolling engine stand. Alternatively, you can use the engine mount to mount the engine to a workbench using a bearing block. We have the engine stands for all classic Porsches with and without a mounting stand in our program.

Notice: The colour of the part may differ from the colour shown.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

6898

您正在查看的产品与这些编号存在交叉引用关系

发动机正时套件 - 适用于保时捷996 Turbo / 996 GT2 / 997.1 Turbo / 997.1 GT2 3.6ltr

该 8230 正时工具套件旨在将配备 4 凸轮 3.6L 发动机的保时捷 911 GT2 和 911 Turbo 上的所有 4 个凸轮轴锁定在其定时位置。允许更换两个凸轮链，同时保持发动机正时。

该套件还包括 2 个凸轮链预紧器

附加信息
• 应用包括：保时捷996 Turbo / GT2 和997.1 Turbo / GT2 (2001 - 2010)。
• 发动机代码应用包括：M97/70S、M97/70、M96/70SL 和M96/70E。
• 相当于OEM 9661、9661/1 和9401。
• 与适当的 DTi（千分表指示器）和支架一起使用，以准确设置凸轮轴位置 - 请参阅激光零件号 7687。
• 设计按照 OEM 说明使用

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

8230

您正在查看的产品与这些编号存在交叉引用关系

Exhaust bolt repair kit for all Porsche 996/997 GT3s, GT2s, and TTs.



Avoid the headache of trying to drill out broken exhaust bolts on the GT3 engines.

A CNC milled plate indexes precisely off of the broken bolts and/or bolt holes. Using our uniquely designed Thumb Screws, the SR068 plate is locked in place (by threading a Thumb Screw over a broken bolt or by using a supplied bolt threaded through the SR068 Thumb Screw). With the included pilot drills and drill guides, the faulty bolt can be drilled out, producing a perfectly perpendicular and centered hole that if necessary can be chased with the supplied M8x1.25 tap.

Kit includes: aluminum fixture, drill bits, tap with extension, drill jigs/guides, Thumb Screws, and hardware in a sturdy storage case. Now also includes our SR065D drill guide.

Jack receptacle



Fits:
Porsche 944 from 08/1985
Porsche 964
Porsche 968
Porsche 993
Porsche 996 Carrera 2/4 / 996 Turbo
Porsche 997 Carrera 2/4 / 997 Turbo
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987C Cayman


If you want to lift your vehicle at the usual jack points, you will not get around an adapter. Only then can the vehicle safely and stably raised without risk of slipping and the underbody protection / paint are protected. This adapter can be rotated thanks to the pin geometry in the original carriage holder and sits so firmly on the vehicle.

Advantages:
• High strength thanks to 7000 aluminum alloy
• prevents scratching of the underbody protection / paint
• enables safe jacking with universal jacks
• Locking function thanks to conical journal base
• geometry adapted to the Porsche models mentioned.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

1154

您正在查看的产品与这些编号存在交叉引用关系

Oil pressure relief plug extractor Porsche 911 / 964 / 993 / 996 / 997



Tolerance between the pressure relief plug and its galley are very close, and the slightest bit of gunk, corrosion, or bur will cause the plug to freeze up in the oil passage. A magnet is rarely powerful enough to overcome the seized plug, and leaving it in place is never an option.
Using STOMSKI RACING's Oil Pressure Relief Plug Extractor makes the task of removing the stuck plug a breeze, and allows you to ensure clean oil passages, and a properly operating bypass system.

The collet-based tool slides easily into the open end of the seized plug and a simple turn or two of the internal socket head cap screw expands the tool, grasping the plug to ensure easy removal.

Anodized Aluminum.

后主油封安装工具。

#科布伦茨#

适合

保时捷 986 Boxster 2.5lrr / 2.7ltr
保时捷 986 Boxster S 3.2 升
保时捷 987.1 Boxster / Cayman 2.7 升
保时捷 987.1 Boxster / Cayman 2.9 升
保时捷 987.1 Boxster S / Cayman S
保时捷 987.1 RS Spyder
保时捷 996 Carrera 2 / Carrera 4
保时捷 996 Carrera 4S
保时捷 997.1 Carrera 2 / Carrera 4
保时捷 997.1 Carrera 2S /Carrera 4S

此专用维修工具是为了正确安装后主油封而开发的。
尝试使用任何其他方法完成此任务都有可能因后主密封损坏而导致发动机损坏

德国制造

Time-Sert™ thread repair kit for SR065/SR067/SR068 for Porsche 911 / Boxster / 996 / 997



For exhaust port studs on 911, Boxster, 996/997 or GT3 heads where the threads have been pulled, or to recover from an already improper repair, we have developed this Time-Sert(tm) kit so you may use our SR065, SR067, SR068 or SR069 tools to insert a Time-Sert and save an otherwise ruined head. In addition to the standard Time-Sert(tm) parts (short P drill, counter-bore, tap, insert tool, and 5 short inserts), our kit also includes a full length P drill, two drill jigs/bushings to guide the P drill and tap in our SR065, SR067, or SR068 fixtures, 5 full length inserts, and 5 studs.

Time-Sert(tm) is a registered trademark of TIME FASTENER COMPANY

Timing chain starp / support for Porsche 911

When assembling the case halves on the 911 engine STOMSKI RACING's SR222-GT3 Timing Chain Strap will prove instrumental in supporting the chain to allow easier mating of the halves. Proper length, radius bend, tension, and quality steel insure that this tool will provide reliable and consistent support for all your engine builds.

fits
• SR222-GT3 for the 996/997 GT2, GT3, and TT engines.

Vario cam sprocket tool for Porsche 996 / 997 GT3/TT/GT2



STOMSKI RACING's version of this tool works on Vario intake cams on the GT2, TT, and GT3 engines. This tool replaces the factory tool P9653. Additional refinements to this tool ensure that while torquing the 16mm hex cam sprocket bolts, your tool is securely bushed and supported in the center of the tool, and thus will not slip off or round off the bolts. Black oxide finished hardened steel.