运动消音器/消声器

运动型排气消声器旁通 x 管。



适合：
保时捷 997.1 turbo - 2007 年至 2008 年

9m 997.1 涡轮增压 X 管赛车排气

• 排气重复使用原装排气管（不包括排气管）
• 200 细胞运动猫
• 无 CEL（检查引擎灯）问题
• 304不锈钢X管非消音结构
• 符合 MOT 标准
• 20np+ 收益

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9M9711102772

您正在查看的产品与这些编号存在交叉引用关系

Exhaust muffler / silencer sports system with 200 Cell Imported HIGH FLOW catalytic converters.

Pipe diameter: 60 mm



Fits:
Porsche 997.1 Turbo 2007 - 2009

DesignTek 997 Turbo Sport exhaust with 200 cell Imported HIGH FLOW catalytic converters. Complete bolt-on system.

Made from high grade T304 stainless steel. DesignTek 997 turbo exhaust system is designed to give your car a better deeper sound, fits with original Porsche tail pipes or DesignTek tail pipes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009706

您正在查看的产品与这些编号存在交叉引用关系

A Voucher for £100 available when you buy this product. For more information CLICK HERE

Exhaust Muffler / Silencer Sports System with 200 Cell Imported HIGH FLOW catalytic converters.

Pipe diameter: 70 mm



Fits:
Porsche 997.1 Turbo 2007 - 2009

DesignTek 997 Turbo Sport exhaust with 200 cell Imported HIGH FLOW catalytic converters. Complete bolt-on system.

Made from high grade T304 stainless steel. DesignTek 997 turbo exhaust system is designed to give your car a better deeper sound, fits with original Porsche tail pipes or DesignTek tail pipes.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009709

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Muffler / Silencer Titanium with Catalytic Converter Twin Chamber Design Weight: 9.90Kg



DesignTek Titanium Super light weight Sport exhaust system. Original Porsche system weight 48Kg, DesignTek Titanium system just 9.90Kg. 996TT / X50/ GT2 / 997 Turbo exhaust system with two 200 cell stainless steel cased German Motorsports Race Cats, DesignTek Exhaust has much lower back pressure and more guaranteed power proven & tested.

Fits:
Porsche 997 Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009737

您正在查看的产品与这些编号存在交叉引用关系

Exhaust Muffler / Silencer Titanium with Catalytic Converter Single Chamber Design Weight: 9.50Kg



DesignTek Titanium Super light weight Sport exhaust system. Original Porsche system weight 46Kg, DesignTek Titanium system just 9.50Kg.996TT / X50/ GT2 / 997 Turbo exhaust system with two 200 cell stainless steel cased German Motorsports Race Cats.

Fits:
Porsche 997 Turbo

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009738

您正在查看的产品与这些编号存在交叉引用关系

The DesignTek Predator "Super Sport" exhaust produced to give a great deep sports car super sound that every 997 turbo driver desires plus the added benefit of a huge weight advantage over the original factory unit. At just 12.5kg the "Super Sport" exhaust section is 35kg lighter than the original factory exhaust.



DesignTek Predator 997 Turbo Sport exhaust fitted with 200 cell HSJ sports high flow catalytic converters. The system is produced with high flow 76mm T304 stainless steel tubing and fixed together with T316 Lsi welded joints. Each bend section is produced by automated CNC plasma cutting equipment and mandrel bending machinery to give the ultimate finish, flow and power.

Total weight is an amazing 12.5Kg. 35Kg Lighter than the factory exhaust.

DesignTek 997 turbo system fits with original Porsche tail pipes or DesignTek tail pipes.

Sound file & Video courtesy of the DesignTeK dealer in France


Fits:
Porsche 997 Turbo 2007>>

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009703

您正在查看的产品与这些编号存在交叉引用关系

The QS Stainless Steeel SPORTS system is massively lighter than the OE in fact its a shade off an impressive 50% total weight reduction.

All 911 drivers are sensitive to the rear weight bias and know that any impovement tin this area will hace multiple benefits. The QS system removes 13.2 kilos from the very rear of the car.

The QS system is constructed using our finest 304 Stainless Steel for maximum durability and is finished by machine polishing to compliment this already beautiful vehicle.

The design has also been meticulously developed to benefit and improve the performance, weight, look and sound to enhance the original exhaust.

While adhering to emission regulations QS have designed this echaust to allow the driver to unleash the full potential of pitch and volume realtive to throttle position. Also enabling a respectively civilised grumble when needed in built up residential areas.

KEY FEATURES:
• Cat cells per inch - 200 cpi
• Stainless Steel Grade 304
• Superlight weight and unrestrictive helps to improve acceleration, handling, braking and throttle response.
• Fully mandrel bent, made by hand in the UK.
• Being light weight makes it a lot easier to fit and get into position, reducing time it takes to fit and man power involved.
• Uses OE tail pipes to keep original Porsche styling. Implements a flesible balance pipe to compensate for the engine expanding as it gets hot. Has Stainless Steel bungs for all sensors to be locates in.


Brand: QUICK SILVER

Fits:
Porsche 911 (997) Turbo 2007>>

The ultimate Sports Exhaust system for the Porsche 997 Turbo.

The QS Inconel TITAN system is almost a third of the weight (18 kilos ~ 38.7lbs) of the standard exhaust. This is a remarkable weight saving, particularly as the catalysts cores & shells (weighing 3.5 kilos) comprise such a large proportion of the total weight. Importantly this weight comes off the very rear of the car so has a profound benefit to the balance and all aspects of performance.

These systems are as close to ona F1 system as exists. Wtilising type 625 Inconel in .7mm and .9mm for tube, silencer casing, muffler internals ans thicker Inconel for the bands and flanges. The heat-shields are fabricated from .5mm Titanium. Though Inconel does not carry any inherent weight advantage over stainless steel, the benefit is that it's superios strength allows less (thinner) material to be used.

Plus, inconel's far superior durability to sxtreme heat make it a much better material for motorsport and turbocharged applications - wich is why Inconel (and not Titanium) is used for F1, IndyCars, Nascar, LeMans and just abour all the top formulae.

KEY FEATURES:
• Built from "INCONEL" and TITANIUM
• Superlight weight and improved flow enhance ALL aspects of performacne!
• Fully mandrel bent, made by hand in the UK.
• Light weight makes it easier to fit, reducing time and effort.
• Uses OE tail pipes to keep original Porsche styling.
• Incorporates a flesible balance to compensate for engine expansion.
• Inbuilt race catalysts - 200 cpsi utilising the new HF high performance cats from HJS.
• All Original sensors are retained.
• Purposeful sound - deep at low speed rising in pitch & volume with rpm and throttle position.


Brand: QUICK SILVER

Fits:
Porsche 911 (997) Turbo 2007>>

DesignTek Sports "Switchable" exhaust produced to give a great deep sports car super sound that every 997 turbo driver desire.



Fits:
Porsche 997 Turbo

High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Turbo Sound

Switch opened: Perfect Racing Sports Turbo Sound

- Incl. 200 Cell Motorsport catalysts
- Complete System made from V2A stainless steel
- More Bh power
- Tail pipes Included

DesignTek 997 Turbo Sport exhaust fitted with 200 cell sports high flow catalytic converters. The system is produced with high flow stainless steel tubing and fixed together with T316 Lsi welded joints. Each bend section is produced by automated CNC plasma cutting equipment and mandrel bending machinery to give the ultimate finish, flow and power.

Please note the remote controlers do not come with batteries. You will have to source them at your own cost. The type is CR2025

For Installation Instructions CLICK HERE

For Wiring Diagram please CLICK HERE



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3606009707

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust rear silencers without catalytic converters.



Fits
Porsche 997 turbo Gen 1 2006-2008

Rear stainless steel Sports Exhaust with catalytic converter delete.

TFL Italy is a company specialising in the production of exhaust systems for sports cars.
At the basis of our achievements there are skills and experience, attention and professionalism.
We have the most innovative and cutting edge equipment that allows us to carry out all metal
processing in house.
We have machinery for laser cutting of sheet metal and tubes; for punching, bending and
calendaring sheet metal; for band and disc cutting.
We use the best tools for TIG and MIG welding and liquid and powder painting.
In our design office we take care of rapid prototyping through the use of innovative 3D scanners.
All this allows us to guarantee precise workmanship capable of ensuring resistance and quality.
This allows us to produce exhaust systems for sports cars of all sizes and types,
suitable for the best vehicles on the market.
We carry out each job with the utmost professionalism, from design to testing
for road homologation.
We value the performance and technical characteristics of sports car exhausts
but we do not put design aside.
TFL Italy offers a wide range of solutions to meet the different needs and preferences
of each customer

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

P0.021.C01

您正在查看的产品与这些编号存在交叉引用关系

Sports exhaust silencer with reduced 200 cell catalytic converter Porsche 997.1 turbo and turbo S



Fits
Porsche 911 turbo 997 Gen 1
Porsche 911 turbo S 997 Gen 1

The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

CATALYTIC CONVERTER REMOVAL - 200 CELLS
Race catalytic converters have fewer cells than standard factory systems. This reduces exhaust back pressure while still maintaining the operation of the catalytic converter, and improves performance and sound

ECU REMAPPING - FOR PERFORMANCE
On turbo cars, catalytic converter replacement may modify turbocharger operating conditions and cause a deterioration of the torque delivery curve. To ensure full benefit from the new racing component, the engine's ECU must be reprogrammed to maximise performance. If the engine warning light comes on, the ECU must always be reprogrammed to eliminate it

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand

END TIPS DESIGN - OE
The muffler must be used in conjunction with the original exhaust end tips

END TIPS NUMBER AND POSITION - 1 + 1 AT THE SIDES
The tailpipes are located low down at the sides of the car. There is one tailpipe at each side

MATERIAL - AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal

EXHAUST FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

MAIN PIPE DIMENSION 60mm
This is the diameter of the main pipe of the exhaust system