Cup Drinks Holders

Centre console cup / drinks holder, Standard Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console cup / drinks holder. Phone Holder Edition - Additional slot is added to fit your phone



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

Available Versions
• Standard Edition
• Low Profile Edition
• Phone Holder Edition - Additional slot is added to fit your phone

If you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons.
This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans.

This is a custom made cup holder to mimic the location of the 992 ones to add additional convenience
Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black (Matching black to centre console)

Plug and play. 5 min install time

Fitment:
2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. 2 3/4 Cup size. This is going to fit everything the slide out cup holder could. Additionally, with this design you can add on a "Cup holder extender" that will sit higher and larger to fit your YETI, Blender bottles, and larger size tumblers should you like.

Plug & Play:
No tools required. Remove trim ring by pulling up. Remove button cluster by pulling up. Slide OEM ashtray forward and up. Install your new cup holder. Re-install the cluster and trim ring.

Direct replacement for Part Number: 99155314300A05
Supersession(s): 991-553-143-00-A05

Some 911's have a cigarette/charger port in the ashtray area (Smokers Package). This cup holder will fit the same. The charging port can be relocated or deleted.

Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.

Centre console MagSafe phone charger. Low Profile Edition



Fits
Porsche 991.1 - All
Porsche 991.2 - All
Porsche 981 Boxster - All
Porsche 981 Cayman - All
Porsche 718 Boxster - All
Porsche 718 Cayman - All

What's the deal: I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to mimic the location of the 992 cupholder and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. Satin Black Magsafe. Plug and play. 5 min install time.
MagSafe: MagSafe Magnetic Charger with USB C end

Phone Fitment for HOLDING ONLY:  Don't have wireless charging or don't want to charge? This setup will include a super thin metal stick-on ring with 3M tape backing that simply attaches to your phone or case to allow you to attach your phone to the magnetic mount.

Phone Fitment for CHARGING: iphone 14,iphone 14 plus,iphone 14 pro max,iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max or iPhone 13 mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max or iPhone 12 mini,AirPods 3, AirPods 2, AirPods Pro, and Mag-Safe Charger-adapted cases, Samsung or Google Pixel phone. Any phones that have Magnetic wireless charging. 

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray insert in front of the armrest. Will NOT fit in the smokers package cubby.

Cup / drinks holder. Side mount



Fits
Fits 718 Boxster, 718 Cayman, 718 Spyder, 911, Boxster, Cayman.

** Any Porsche with this centre console design will fit ** (some may be missing from below, I will update as best I can)

Porsche 991 ALL
Porsche 718 ALL
Porsche 981 ALL
Porsche 911 ALL 2011+
Porsche Boxster ALL 2013+
Porsche Cayman ALL 2014+

I'm a fan of the fold out cup holders but if you've had any amount of seat time with a drink in the car then you'll know drinks move and spill on your HVAC buttons. This commonly makes your fan/temp controls sticky and sometimes non responsive. With the 992 911 2020+ interior update some cars have a cup holder in the centre console where a small ashtray or cubby is on all previous 911s and current Caymans. This is a custom made cupholder to utilize un-used space in the car and add an additional convenience to your experience to all other makes and models. Visually the goal is to offer a piece that does not deviate from the OEM look of the car while adding function.

Package Includes: 1x Cup holder. 1x Side Bracket. 1x Cup Bracket. Satin Black. Plug and play. 5-15 min install time.

Fitment: 2011 - 2022 all two door Porsche cars with the ashtray/cubby in front of the armrest. YETI, Blender bottles, and larger size tumblers fit great.

Plug & Play: Minimal to no tools required. Pull on the centre console passenger side cover. Slip the side bracket in. It will slide into place and you will feel it lock into the casting behind the side cover. Screw the cup bracket into the side bracket. Slide cup onto the bracket.




Note
These are 3d printed parts. There will be support marks and small/minor blemishes on some surfaces. We post treat these as best we can to match the OEM look and feel. The pictures above represent exactly what you should expect.