陶瓷制动盘替换件

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle

... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2118123

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2121123

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2122121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2122122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 36 mm left
- Brake disc type drilled, front axle 410 x 36 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2122123

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - DRILLED
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "Drilled":

Drilled brake discs lead off the emerging braking heat faster than undrilled discs because of the high ventilation at the bigger radiation surface.

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 26 mm left
- Brake disc type drilled, front axle 410 x 26 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2125121

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC PCCB Discs - WET
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WET":

Profiled brake discs disperse the water film from the brake disc surface within fractions of a second and provide a very short response time also in case of pouring rain.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 26 mm left
- Brake disc type drilled, front axle 410 x 26 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2125122

您正在查看的产品与这些编号存在交叉引用关系

Replacement for CERAMIC Discs - WAVE
Made of HTCIC (High-Tech-Cast Iron-Carbon)



Characteristics "WAVE":

Lowest weight and maximum deceleration values because of biggest radiation surface and also optimum brake pad cleaning milling (ursprünglich: vent) make this disc a vantage for motorsport use with varying conditions.

Delivery period: approx. 20 working days

The original brake discs are replaced with the "o-brake.com" HTCIC high performance brake discs by easy "plug and play" mounting, which we are happy to offer and is available at any specialist workshop. Compared to the conventional gray cast iron brake discs, the highly durable HTCIC (High Tech Cast Iron Carbon) material is revolutionary, even ceramic brake discs are outperformed (responding qualities are present in both cold and hot condition). Further essential advantages are: Extremely high fading level, highest thermal stability possible, precise modulation as well as an affordable price. All our high performance brake parts are compatible with your car's safety features such as ABS, ESP, PSM, etc.

This kit consists of the following parts:

... for the front axle:
- Brake disc type drilled, front axle 410 x 26 mm left
- Brake disc type drilled, front axle 410 x 26 mm right
- Mounting kit retaining the original brake disc hat, front axle



... for the rear axle:
- Brake disc type drilled, rear axle 390 x 30 mm left
- Brake disc type drilled, rear axle 390 x 30 mm right
- Mounting kit retaining the original brake disc hat, rear axle

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

2125123

您正在查看的产品与这些编号存在交叉引用关系

Two-piece floating slotted Direct Drive V3 front iron disc PCCB conversion (including road centre-lock wheels).

Dimensions : 410 × 62 × 34 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

410.069.6

您正在查看的产品与这些编号存在交叉引用关系

Brake Disc / Rotor Slotted 2-pc FRONT




Fits:
Porsche 996 Turbo with Ceramic Brakes (PCCB)

Porsche 997 Turbo Without Ceramic
Porsche 997 C2 / C2S / C4S with Ceramic Brakes (PCCB)
Porsche 997.2 C2 with Ceramic Brakes (PCCB)
Porsche 987 Cayman S with Ceramic Brakes (PCCB)
Porsche 991.1 C2S with Ceramic Brakes (PCCB)
Porsche 991 C4S with Ceramic Brakes (PCCB)
Porsche 981 Boxster S with Ceramic Brakes (PCCB)
Porsche 981 Cayman S with Ceramic Brakes (PCCB)
Porsche 718 Boxster S / GTS with Ceramic Brakes (PCCB)
Porsche 718 Cayman S / GTS with Ceramic Brakes (PCCB)
Porsche 991.2 C2S / C4S / GTS
Porsche 992 C2S / C4S


Kit Contains:
Brake Disc 350MM complete with centre bell.

Brake Disc Type: 2-Piece Slotted

The Girodisc brake rotor is a direct replacement for the OE discs, and provides significant performance benefits. The rotors are compatible with any of the current pads typically used with these cars.

Additional information:

Braking Performance: The rotor is a two-piece design developed in racing to produce a lightweight rotor that can compensate for the different expansion rates between the hat and rotor and eliminate the possibility of rotor warping.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, which allows for axial and radial float.

More heat sink without a weight penalty: The Girodisc disc set weights in a little lighter than the OE system but with an important advantage. The rotors have grown in diameter. This means that weight has been transferred from the center hat were it does nothing to the outer diameter where it is actively absorbing and dispersing heat.

High Quality Materials: The Girodisc system uses only the highest quality materials and components. The rotors are high carbon content iron for long wear and stable thermal performance. The top hat section is machined from billet aluminum with an attractive anodized finish. The rotor rings are bright zinc plated to help prevent unsightly corrosion

This discs will fit cars with the Ceramic option from factory.

This product is a special order item, allow 5 - 7 working days for delivery.

PAGID RSC-1 复合刹车片

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991.1 3.4L Carrera [带 RBD 铸铁盘的陶瓷制动钳] 2011 - 2016 年（后）
保时捷 991.1 3.8L Carrera S [带 RBD 铸铁盘的陶瓷制动钳] 2011 - 2016 年（后）
保时捷 991.1 3.4L Carrera [陶瓷刹车] 2011 - 2015 (后)
保时捷 991.1 3.8L Carrera S [陶瓷刹车] 2011 - 2015 (后)
保时捷 991.1 3.8L Carrera 4S [陶瓷刹车] 2011 - 2015 (后)

保时捷 991.2 3.0L Carrera [陶瓷刹车] 2015 - 2018（后）
保时捷 991.2 3.0L Carrera S [陶瓷刹车] 2015 - 2018（后）

保时捷 992 3.0L Carrera [铁刹车] 2018>>（后）
保时捷 992 3.0L Carrera S [铁刹车] 2018>>（后）
保时捷 992 3.0L Carrera 4S [铁刹车] 2018>>（后）

保时捷 970 Panamera [陶瓷刹车] 2009 - 2016 (后)

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业当前的所有生态标准。

RSC 1是一种低金属树脂粘结材料，含有钢和芳纶纤维。该材料具有良好的综合特性，适用于所有类型的用途。

• 中等摩擦系数
• 良好的全面性能特征
• 适合光盘

应用范围：适用于所有已知类型的陶瓷刹车盘的比赛和赛道日复合材料。


有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4909RSC1

您正在查看的产品与这些编号存在交叉引用关系

PAGID RSC-1 复合刹车片

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991.1 3.4L Carrera 2011 - 2015 [陶瓷刹车（前）
保时捷 991.1 3.8L Carrera S 2011 - 2015 [陶瓷刹车（前）

保时捷 991.2 3.0L Carrera 2015 - 2018 [陶瓷刹车]（前部）
保时捷 991.2 3.0L Carrera S 2015 - 2018 [陶瓷刹车]（前部）

保时捷 981 Cayman S 2013 - 2016 [陶瓷刹车]（前部）

保时捷 718 Boxster 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster S 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Boxster T 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster GTS 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Boxster GTS 4.0ltr [陶瓷刹车]（前部）
保时捷 718 Boxster Spyder 4.0ltr [陶瓷刹车]（前部）

保时捷 718 Cayman 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Cayman S 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Cayman T 2.0ltr [陶瓷刹车]（前部）
保时捷 718 Cayman GTS 2.5ltr [陶瓷刹车]（前部）
保时捷 718 Cayman GTS 4.0ltr [陶瓷刹车]（前部）

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业当前的所有生态标准。

RSC 1是一种低金属树脂粘结材料，含有钢和芳纶纤维。该材料具有良好的综合特性，适用于所有类型的用途。

• 中等摩擦系数
• 良好的全面性能特征
• 适合光盘

应用范围：适用于所有已知类型的陶瓷刹车盘的赛车和赛道日复合材料。


有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC RACING DISC.

This Product Fits:

Porsche 991 GT3 [ceramic brakes] 2015 - 2018 (REAR)
Porsche 991 GT3 RS [ceramic brakes] 2015 - 2018 (REAR)

Porsche 991 R [ceramic brakes] 2016>> (REAR)
Porsche 991 Turbo [ceramic brakes] 2013>> (REAR)
Porsche 991 Turbo S [ceramic brakes] 2013 >> (REAR)

Porsche 991.2 GT2 RS [ceramic brakes] 2018>> (REAR)
Porsche 991.2 GT3 [ceramic brakes] 2018>> (REAR)
Porsche 991.2 GT3 RS [ceramic brakes] 2018>> (REAR)

Porsche 992 3.0 Carrera 2S [ceramic brakes] 2018>> (REAR)
Porsche 992 3.0 Carrera 4S [ceramic brakes] 2018>> (REAR)
Porsche 992 GT3  [ceramic and iron brakes] 2018>> (REAR)
Porsche 992 turbo [ceramic and iron brakes] 2018>> (REAR)

Porsche 981 Cayman GT4 [iron brakes] 16>> (REAR)
Porsche 981 Cayman GT4 [ceramic brakes] 16>> (REAR)

Porsche 718 (982) Cayman GT4 4.0 [ceramic and cast iron brakes] 2019>> (REAR)

PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage.

• MEDIUM FRICTION COEFFICIENT
• GOOD ALLROUND PERFORMANCE CHARACTERISTICS
• DISC FRIENDLY

APPLICATION RANGE: Race and track day compound for all known types of ceramic brake discs.

Information about Friction vs Temperature

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4925RSC1

您正在查看的产品与这些编号存在交叉引用关系

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC RACING DISC.

This Product Fits:

Porsche 991 GT3 [ceramic brakes] 2015 - 2018 (REAR)
Porsche 991 GT3 RS [ceramic brakes] 2015 - 2018 (REAR)

Porsche 991 R [ceramic brakes] 2016>> (REAR)
Porsche 991 Turbo [ceramic brakes] 2013>> (REAR)
Porsche 991 Turbo S [ceramic brakes] 2013 >> (REAR)

Porsche 991.2 GT2 RS [ceramic brakes] 2018>> (REAR)
Porsche 991.2 GT3 [ceramic brakes] 2018>> (REAR)
Porsche 991.2 GT3 RS [ceramic brakes] 2018>> (REAR)

Porsche 992 3.0 Carrera 2S [ceramic brakes] 2018>> (REAR)
Porsche 992 3.0 Carrera 4S [ceramic brakes] 2018>> (REAR)
Porsche 992 GT3  [ceramic and iron brakes] 2018>> (REAR)
Porsche 992 turbo [ceramic and iron brakes] 2018>> (REAR)

Porsche 981 Cayman GT4 [iron brakes] 16>> (REAR)
Porsche 981 Cayman GT4 [ceramic brakes] 16>> (REAR)

Porsche 718 (982) Cayman GT4 4.0 [ceramic and cast iron brakes] 2019>> (REAR)

PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

• MEDIUM HIGH FRICTION COEFFICIENT
• EXCELLENT FADE RESISTANCE
• LONG PAD LIFE

APPLICATION RANGE: Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.

Information about Friction vs Temperature

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4925RSC2

您正在查看的产品与这些编号存在交叉引用关系

NEWLY DEVELOPED BRAKE PADS FOR CERAMIC RACING DISC.

This Product Fits:

Porsche 991 Turbo 2013>> [ceramic brakes] (FRONT)
Porsche 991 GT3 RS 2015>> [ceramic brakes] (FRONT)
Porsche 991 GT3 2013 >>[ceramic brakes] (FRONT)

Porsche 981 Cayman GT4 2016>> [ceramic brakes] (FRONT)
Porsche 718 Cayman GT4 2019>>  [ceramic brakes] (FRONT)

Porsche 991.2 GT2 RS 2018>> [ceramic brakes] (FRONT)
Porsche 991.2 GT3 2018>> [ceramic brakes] (FRONT)
Porsche 991.2 GT3 RS 2018>> [ceramic brakes] (FRONT)

Porsche 992 3.0L Carrera 2S / Carrera 4S [ceramic brakes] 2018>> (FRONT)
Porsche 992 GT3 [ceramic brakes] 2020>> (FRONT)

PAGID Racing RSC compounds are developed to comply with the latest requirements in ceramic composite brake disc technology and meet or surpass all current ecological standards of the automotive industry.

RSC 2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

• MEDIUM HIGH FRICTION COEFFICIENT
• EXCELLENT FADE RESISTANCE
• LONG PAD LIFE

APPLICATION RANGE: Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.


Information about Friction vs Temperature

Information about Racing Compound Characteristics

Information about Brake Pad Size

Sold as set of 4 pads for one axle.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4927RSC2

您正在查看的产品与这些编号存在交叉引用关系

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991 Turbo 2013>> [陶瓷刹车]（前部）
保时捷 991 GT3 RS 2015>> [陶瓷刹车]（前部）
保时捷 991 GT3 2013 >>[陶瓷刹车]（前部）

保时捷 981 Cayman GT4 2016>> [陶瓷刹车]（前部）
保时捷 718 Cayman GT4 2019>> [陶瓷刹车]（前部）

保时捷 991.2 GT2 RS 2018>> [陶瓷刹车]（前部）
保时捷 991.2 GT3 2018>> [陶瓷刹车]（前部）
保时捷 991.2 GT3 RS 2018>> [陶瓷刹车] (前部)

保时捷 992 3.0L Carrera 2S / Carrera 4S [陶瓷刹车] 2018>>（前部）
保时捷 992 GT3 [陶瓷刹车] 2020>>（前部）

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业当前的所有生态标准。

RSC 3是一种含有钢纤维的低金属树脂粘合材料。该材料专为上述应用而开发。

• 高摩擦系数
• 卓越的抗褪色性
• 刹车片寿命长

应用范围：用于短跑和耐力赛道赛车的摩擦表面纤维含量低的陶瓷盘专用赛车复合材料。


有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4927RSC3

您正在查看的产品与这些编号存在交叉引用关系

新开发的陶瓷赛车盘刹车片。

本产品适合：

保时捷 991 GT3 [陶瓷刹车] 2015 - 2018（后）
保时捷 991 GT3 RS [陶瓷刹车] 2015 - 2018（后）

保时捷 991 R [陶瓷刹车] 2016>>（后）
保时捷 991 Turbo [陶瓷刹车] 2013>>（后）
保时捷 991 Turbo S [陶瓷刹车] 2013 >> （后）

保时捷 991.2 GT2 RS [陶瓷刹车] 2018>>（后）
保时捷 991.2 GT3 [陶瓷刹车] 2018>>（后）
保时捷 991.2 GT3 RS [陶瓷刹车] 2018>>（后）

保时捷 992 3.0 Carrera 2S [陶瓷刹车] 2018>>（后）
保时捷 992 3.0 Carrera 4S [陶瓷刹车] 2018>>（后）
保时捷 992 GT3 [陶瓷和铁刹车] 2018>>（后）

保时捷 992 turbo [陶瓷和铁刹车] 2018>>（后）

保时捷 981 Cayman GT4 [铁刹车] 16>>（后）
保时捷 981 Cayman GT4 [陶瓷刹车] 16>>（后）

保时捷 718 (982) Cayman GT4 4.0 [陶瓷和铸铁刹车] 2019>>（后）

PAGID Racing RSC复合材料的开发符合陶瓷复合制动盘技术的最新要求，并达到或超越了汽车行业所有现行的生态标准。

RSC 3是一种含有钢纤维的低金属树脂粘合材料。该材料专为上述应用而开发。

• 高摩擦系数
• 卓越的抗褪色性
• 刹车片寿命长

应用范围：用于短跑和耐力赛道赛车的摩擦表面纤维含量低的陶瓷盘专用赛车复合材料。

有关摩擦与温度的信息

有关赛车复合材料特性的信息

有关刹车片尺寸的信息

以适用于一个车轴的 4 个垫片的套装形式出售。

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

E4925RSC3

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing Front and rear brake kit with Slotted trackday / race 380 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 991 GT2 / GT3 including PCCB (2013-)
Porsche 981 Cayman GT4

Porsche 718 Cayman GT4

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 380.069.63 / 380.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 900.900.002.11 FA/RA Stud Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0380.0001

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing 前后制动器套件，带有开槽赛道日/竞赛 380 x 34mm 前盘组件和 380 x 30mm 后盘组件。

#全氟辛烷磺酸#

适合：
保时捷 996 / 997 / 991 Turbo 包括 PCCB
以及一些 4WD 版本，包括 Carrera 4 和 4S

请在订购前发送车轮装配信息。某些型材可能存在间隙问题。

PFC 高性能制动套件包括：
• 锻造 ZR95 6 活塞前卡钳
• 锻造 ZR96 4 活塞后卡钳
• 合金帽上的前直接驱动 V3 盘（零件编号 380.069.63 / 380.069.64）
• 合金帽上的后部直接驱动 V3 盘（零件编号 380.067.63 / 380.067.64）
• 比赛规格刹车片（FA 7995.11.22.44 / RA 7969.11.20.44）
• 硬件（零件编号 225.143.335.21 FA 支架套件 / 130.288.120.21 RA 垫片套件）
• 专为比赛和赛道使用而定制设计
• 真正的比赛技术

PFC 套件提供最佳的制动性能，而且外观精美！

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0380.0002

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing Front and rear brake kit with Slotted trackday / race 405 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 991 GT2 / GT3 including PCCB (2013-)
Porsche 981 Cayman GT4

Porsche 718 Cayman GT4

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 405.069.63 / 405.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 120.125.300.21 FA Spacer Kit / 900.900.002.11 FA/RA Stud Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0405.0001

您正在查看的产品与这些编号存在交叉引用关系

PFC Racing Front and rear brake kit with Slotted trackday / race 405 x 34mm front and 380 x 30mm rear disc assemblies.



Fits:
Porsche 996 / 997 / 991 Turbo including PCCB
and some 4WD versions including Carrera 4 & 4S

Please send wheel fitment information before ordering. There can be clearance issues with some profiles.

PFC high performance brake kits include:
• Forged ZR95 6-piston front caliper (part no 95.405.290.365.11 / 95.405.290.365.12)
• Forged ZR96 4-piston rear caliper (part no 96.380.290.365.01 / 96.380.290.365.02)
• Front Direct Drive V3 discs on alloy hats (part no 405.069.63 / 405.069.64)
• Rear Direct Drive V3 discs on alloy hats (part no 380.067.63 / 380.067.64)
• Race-specification brake pads (FA 7995.11.22.44 / RA 7969.11.20.44)
• Hardware (part no 225.143.460.21 FA Bracket Kit / 130.288.120.21 RA Spacer Kit)
• Custom-engineered for race and track use
• Genuine race technology

PFC kits offer the best braking performance available, along with great looks!

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

0405.0002

您正在查看的产品与这些编号存在交叉引用关系

Two-piece floating slotted Direct Drive V3 rear iron disc PCCB disc conversion (including road centre-lock wheels) .

Dimensions : 390 × 65 × 32 mm



This Product Fits:

Porsche 991 GT2 / GT2 RS 2012>>
Porsche 991 GT3 / GT3 RS / Turbo 2012>> incl 991.2
Porsche 981C Cayman GT4 2014>>
PCCB iron disc replacement

Ever since the disc brake was invented vibration and pulsation caused by thermal expansion has been a major issue giving rise to warped discs - until now?

PFC has released new V3 disc and hat technology. The advanced design features a patented attachment design that uses a retention ring that holds the hat and disc together.

The ring means no need for torque wrenches, and no hassle. The ability to change a disc quickly and efficiently saves time and effort. As well as being convenient, the new V3 technology is much lighter than previous designs, making it easier to put on and pull off, and making the vehicle lighter.

This V3 disc retention method is based on the use of a two-turn retaining ring, which is held in a groove in the hat that overlaps the disc flanges – effectively locking the disc to the hat.

● Exceptional manufacturing standards - Run out less than 0.0254mm, Thickness variation less than 0.00762mm. Surface finishes less than .7 microns.When used in conjunction with Z rated fast road/track day pads, component life and on track performance markedly improved over competitors pads.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

390.075.6

您正在查看的产品与这些编号存在交叉引用关系

Zimmermann Formula:R race front brake pads. 
Designed exclusively for cast-iron brake discs

The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. 

RACETRACK USE ONLY.




Porsche 718 Boxster / Cayman 2.0ltr - 2017 Onwards
Porsche 718 Boxster S / Cayman S 2.5ltr - 2017 Onwards
Porsche 718 Boxster T / Cayman T 2.0ltr
Porsche 718 Boxster GTS / Cayman GTS 2.5ltr
Porsche 718 Boxster GTS / Cayman GTS 4.0ltr
Porsche 718 Boxster Spyder / Cayman GT4 4.0ltr
Porsche 991.1 Carrera / Carrera 4 3.4ltr - 2012 to 2016
Porsche 991.1 Carrera S / Carrera 4S 3.8ltr - 2012 to 2016
Porsche 991.2 Carrera / Carrera 4 3.0ltr - 2016 to 2018
Porsche 991.2 Carrera S / Carrera 4S 3.0ltr - 2016 to 2018
Porsche 991.2 Carrera GTS / Carrera 4 GTS 3.0ltr - 2016 to 2018
Porsche 992 GT3 - 2019 Onwards

Formula:R Brake Pads – for your perfect braking point. 

Compound Type:

OZ 20: suitable for long distance series; extremely high stability of the friction coefficient over a wide temperature range
OZ 30: suitable for sprint distances; highest friction coefficient with good wear properties of brake disc and brake pad

The mixtures of the friction material of Formula:R brake pads are individually developed in cooperation with our racing team and are successfully tested in endurance racing. The durability of brake discs and brake pads are just as important as a stable friction coefficient, which ensures that the pads are extremely fading-resistant. To adapt the pads to the individual requirements of different drivers, different friction compounds are available for some applications.

Zimmermann has been manufacturing high-quality brake parts at the Sinsheim site for more than 60 years. Our brake parts are used successfully in the Nürburgring Endurance Series (NLS) under the extreme conditions at the Nürburgring and are constantly being further developed.

Made in Germany

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

98135193904ZIMFR

您正在查看的产品与这些编号存在交叉引用关系

Zimmermann Formula:R race rear brake pads. 
Designed exclusively for cast-iron brake discs

The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. 

RACETRACK USE ONLY:




Porsche 981 Cayman GT4 - 2015 to 2016
Porsche 718 Cayman GT4 4.0ltr  - 2017 Onwards
Porsche 991.2 GT3 / GT3 RS - 2015 to 2018
Porsche 991.2 GT2 RS - 2018 
Porsche 991.2 Speedster
Porsche 991 turbo / turbo S - 2013 to 2018
Porsche 991 R
Porsche 992 Carrera 4S 3.0ltr
Porsche 992 GT3 - 2021 Onwards
Porsche 918 Spyder


Formula:R Brake Pads – for your perfect braking point. 

Compound Type:

OZ 10: suitable for long distance series and sprint distances; optimally tuned friction mixture for the rear axle, perfect in combination with the friction mixture OZ 20 or OZ 30 on the front axle.

The mixtures of the friction material of Formula:R brake pads are individually developed in cooperation with our racing team and are successfully tested in endurance racing. The durability of brake discs and brake pads are just as important as a stable friction coefficient, which ensures that the pads are extremely fading-resistant. To adapt the pads to the individual requirements of different drivers, different friction compounds are available for some applications.

Zimmermann has been manufacturing high-quality brake parts at the Sinsheim site for more than 60 years. Our brake parts are used successfully in the Nürburgring Endurance Series (NLS) under the extreme conditions at the Nürburgring and are constantly being further developed.

Made in Germany

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99135294701ZIMFR

您正在查看的产品与这些编号存在交叉引用关系

Zimmermann Formula:R race rear brake pads. 
Designed exclusively for cast-iron brake discs

The Formula:R product line is the result of collaboration with the Zimmermann-sponsored racing team. 

RACETRACK USE ONLY




Porsche 991.1 Carrera S / GTS 3.8ltr - 2012 to 2016
Porsche 991.1 Carrera S / GTS 3.8ltr - 2012 to 2016 - with PCCB caliper and cast iron disc
Porsche 991.2 Carrera 3.0ltr - 2016 to 2018
Porsche 991.2 Carrera 2S 3.0ltr - 2016 to 2018
Porsche 992 Carrera S 3.0ltr - 2019 Onwards
Porsche 992 Carrera 4S 3.0ltr - 2019 Onwards

Formula:R Brake Pads – for your perfect braking point.

Compound Type:

OZ 10: suitable for long distance series and sprint distances; optimally tuned friction mixture for the rear axle, perfect in combination with the friction mixture OZ 20 or OZ 30 on the front axle.

The mixtures of the friction material of Formula:R brake pads are individually developed in cooperation with our racing team and are successfully tested in endurance racing. The durability of brake discs and brake pads are just as important as a stable friction coefficient, which ensures that the pads are extremely fading-resistant. To adapt the pads to the individual requirements of different drivers, different friction compounds are available for some applications.

Zimmermann has been manufacturing high-quality brake parts at the Sinsheim site for more than 60 years. Our brake parts are used successfully in the Nürburgring Endurance Series (NLS) under the extreme conditions at the Nürburgring and are constantly being further developed.

Made in Germany.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99135294904ZIMFR

您正在查看的产品与这些编号存在交叉引用关系