Shock Absorber Parts FRONT

Front Monoball Shock Mounts (Camber Plates) PAIR



Fits:
Porsche 991.1 Carrera / Turbo
Porsche 991.2 Carrera / Turbo
Porsche 981 Boxster (inc Spyder) and 981C Cayman
Porsche 982 Boxster and 982C Cayman

These mounts will not fit GT3 or GT4 models

Designed for street and track use. Camber adjustment provides additional 1.1 degrees over OEM setup without need of upgrading your control arms to GT3 style. Will work on cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.


• Compatible with factory and aftermarket shock and spring kits (PSS10, KW etc)
• 1.1 degree increased camber adjustment range
• Precision monoball bearing, positively clamped in position
• Reduced camber changes & better handling
• CNC machined 
• No noise coming from bearing



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

3602509911

您正在查看的产品与这些编号存在交叉引用关系

Bellow cover for front shock absorber.

Fits:
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 981 Spyder 2016 Cars with PR:X73 Sport chassis

Porsche 982 Boxster 2017-2021 Cars  with PASM / Sport suspension
Porsche 982C Cayman 2017-2021 Cars  with PASM / Sport suspension

Porsche 991.1 Carrera 2012-2016 Cars  with PASM / Sport suspension
Porsche 991.1 Turbo 2014-2016 

Porsche 991.2 Carrera 2017-2016
Porsche 991.2 Turbo 2017-2020

Porsche 992.1 Carrera 2019-2021
Porsche 992.1 Turbo 2020-2021

Front shock absorber bump stop.



Fits:
Porsche 981 Boxster 2012-16 cars with PASM
Porsche 981C Cayman 2014-16 cars with PASM

Porsche 982 Boxster 2017>> cars with PASM
Porsche 982C Cayman 2017>> cars with PASM

Porsche 991.1 Carrera / Turbo 2012-16 cars with PASM (excluding standard and sport type chassis)
Porsche 991.2 Carrera / Turbo 2017>> cars with PASM (excluding standard and sport type chassis)

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Front shock absorber bump stop.



Fits:
Porsche 981 Boxster 2012-16 cars with Sport Chassis / without PASM
Porsche 981C Cayman 2014-16 cars with Sport Chassis / without PASM
Porsche 981 Spyder 2016 

Porsche 982 Boxster 2017-21 cars with Sport Chassis (M030)
Porsche 982C Cayman 2017-21 cars with Sport Chassis (M030)

Porsche 991.1 Carrera / Turbo 2012-16 cars with Sport chassis or PASM (M030 / M031)
Porsche 991.2 Carrera / Turbo 2017-19 cars with Sport chassis or PASM (M030 / M031)

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134330105

您正在查看的产品与这些编号存在交叉引用关系

Front shock absorber bump stop.



Fits:
For cars with standard chassis
Porsche 981 Boxster 2012-16
Porsche 982 Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C Cayman 2017>>
Porsche 991.1 Carrera 2012-16

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134330104

您正在查看的产品与这些编号存在交叉引用关系

Front shock absorber compensation ring.




Fits:
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 981 Spyder 2016

Porsche 982 Boxster 2017-2021
Porsche 982C Cayman 2017-2021

Porsche 991.1 Carrera 2012-2016
Porsche 991.1 Turbo 2014-2016 

Porsche 991.2 Carrera 2017-2016
Porsche 991.2 Turbo 2017-2020

Porsche 992.1 Carrera 2019-2021
Porsche 992.1 Turbo 2020-2021

Front shock absorber mounting.



Fits:
Porsche 991 GT2 RS 2014-20
For cars with PASM electronic damper control (option code: 475)

Porsche 991 GT3 3.8L (475Bhp)

Porsche 991 GT3 RS 4.0L (500Bhp)

Porsche 991 R 4.0L (500 Bhp)

Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134301

您正在查看的产品与这些编号存在交叉引用关系

Front shock absorber spring support seat (lower).



Fits:
Porsche 981 Boxster 2012-16
Porsche 982 Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C Cayman 2017>>
Porsche 991.2 2012-16
Porsche 991.1 2017-19
Porsche 992.1 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 3



相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P1411189

您正在查看的产品与这些编号存在交叉引用关系

Front shock absorber top mount underlay pad. Upper



Fits:
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 981 Spyder 2016

Porsche 982 Boxster 2017-2021
Porsche 982C Cayman 2017-2021

Porsche 991.1 Carrera 2012-2016
Porsche 991.1 Turbo 2014-2016 

Porsche 991.2 Carrera 2017-2016
Porsche 991.2 Turbo 2017-2020

Porsche 992.1 Carrera 2019-2021
Porsche 992.1 Turbo 2020-2021

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Offset camber plates.
Sold as a pair - 1 pair, required per car



Fits Front
Porsche 981 Boxster and Cayman
Porsche 718 Boxster and Cayman
Porsche 991 Carrera, Carrera 4
Porsche 991 Carrera S, Carrera 4S

More Camber and Caster

Our offset front camber plates allow for additional camber and castor over the factory range of adjustment, similar to the GT3 geometry. These camber plates fit original factory type struts, including those equipped with PASM.

These plates use high strength hardened steel spherical bearings and are direct replacements for the factory plates which use compliant rubber bushings. The Teflon lined spherical bearings used in our kit are entirely maintenance free and require no supplemental lubrication. These plates are sealed to prevent contamination from water or grime, thus extending bearing life. This makes the Elephant Racing camber plate kit perfect for regular street use, as well as extended abuse on the race track.

Higher Performance

Spherical bearings further improve performance. The spherical bearings pivot freely, but eliminate the deflection that is inherent with the factory rubber bushings. This is important for two reasons

– The factory rubber acts as a spring in series with the strut. This rubber spring-action is completely un-damped and reduces the struts ability to control the tire contact patch. The spherical bearing allows the strut damper to do its job and control the contact patch.

– The factory rubber deflects sideways under cornering loads, causing loss of camber just when you need it most. Our spherical bearings eliminate the deflection, maintaining stable and predictable camber.

Use Stock Springs or Coilovers

Fully compatible with stock springs and aftermarket lowering springs. Also supports coilovers that use and upper spring perch.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

21522

您正在查看的产品与这些编号存在交叉引用关系

Rennline Clubsport Camber Plate Top Mount Set.
SET OF 2



Fits:
Porsche 991/981/718 2WD except GT3/GT4

Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.

• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S54

您正在查看的产品与这些编号存在交叉引用关系

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

S55

您正在查看的产品与这些编号存在交叉引用关系

Shock Absorber Concave Washer.



Fits:
Porsche 991.2 C2 / C2S / GTS 2017>> (I474)
Porsche 991.2 C4 / C4S 2017>> (I474)
Porsche 991.2 TARGA C4 / C4S 2017>> (I474)
Porsche 991.2 Turbo 2017>> (I474)

* I474 - cars with Front axle lift function

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9P1412103

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber protective tube, Front.


Fits:
Porsche 997 GT3 2007-11
Porsche 991 Turbo GT2 RS 3.8L 2014>>(I475) For cars whit PASM electronic damper control)
Porsche 991 GT3 2014-17 (I475) For cars whit PASM electronic damper control)
Porsche 991 GT3 2018 >> (I475) For cars whit PASM electronic damper control)
Porsche 981 Cayman GT4

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99734356790

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber stop cap.



Fits:
Porsche 991.2 Carrera 2017-19 with Front -axle lift function (option code:474)
Porsche 991.2 Turbo 2017-21

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134366101

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber top nut M14 X 1,5



Fits:
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 981 Spyder 2016
Porsche 981 GT4 2016

Porsche 982 Boxster 2017-2021
Porsche 982C Cayman 2017-2021
Porsche 982 Spyder 2019-2021
Porsche 982 GT4 2019-2021

Porsche 991.1 Carrera 2012-2016
Porsche 991.1 Turbo 2014-2016 
Porsche 991.1 GT3 2014-2017

Porsche 991.2 Carrera 2017-2016
Porsche 991.2 Turbo 2017-2020
Porsche 991.2 GT3 2017-2020

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Porsche 992.1 Carrera 2019-2021
Porsche 992.1 Turbo 2020-2021

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

PAF00855000

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber upper mount bearing



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017-18
Porsche 991 Turbo 2014-18
Porsche 981 Boxster 2012-16
Porsche 981C Cayman 2013-16
Porsche 982 Boxster 2017>>
Porsche 982C Cayman 2017>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134350103

您正在查看的产品与这些编号存在交叉引用关系

Shock absorber upper mount bearing.

Please note: the metal insert plate would have to be transferred over from old mount



Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017-18
Porsche 991 Turbo 2014-18
Porsche 981 Boxster 2012-16
Porsche 981C Cayman 2013-16
Porsche 982 Boxster 2017>>
Porsche 982C Cayman 2017>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134350103

您正在查看的产品与这些编号存在交叉引用关系

减震器上部支撑架。前部。

#保时捷#

适合：
保时捷 991.1 C2 / C2S / C4 / C4S 2012-16
保时捷 991.2 C2 / C2S / C4 / C4S 017>>
保时捷 991 Turbo 2014>>
保时捷 981 Boxster 2012-16
保时捷 982 (718) Boxster 2017>>
保时捷 981C Cayman 2014-16
保时捷 982C Cayman 2017>>

单击“放大”可查看大部件图。
图表参考编号 3

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134301502

您正在查看的产品与这些编号存在交叉引用关系

弹簧盘上前悬架支柱。
每辆车需售出 2 个



适合：
保时捷 718 Boxster Spyder - 2019 年起
保时捷 918 Cayman GT4 - 2016
保时捷 718 Cayman GT4 - 2019 年起
保时捷 991 GT2 RS - 2016 至 2019
保时捷 991 GT3 / GT3 RS - 2014 年至 2021 年
保时捷 991 Speedster - 2014 年至 2021 年

对于带有选项代码的汽车
475 - PASM 电子风门控制

单击“放大”查看大零件图。
图表参考号 4


相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

99134350782

您正在查看的产品与这些编号存在交叉引用关系