制动钳螺栓/制动盘螺钉

Brake caliper mounting stud kit GiroDisc
One kit per axle



Fits:

Porsche 997 turbo - 2007 to 2012 with PCCB
Porsche 997 GT3 Cup 
Porsche 997.1 GT3 / GT2  - 2007 to 2008 with PCCB
Porsche 997.2 GT3 / GT2  - 2010 to 2012 WITHOUT PCCB
Porsche 991 turbo / turbo S - 2012 to 2018 with PCCB
Porsche 991.2 Carrera 2 / 4  / 4S - 2016 to 2018 with PCCB
Porsche 991 GT3 / GT3RS - 2012 to 2018 WITHOUT PCCB
Porsche 991 GT3 /GT3RS / GT2RS 2012 to 2018 with PCCB
Porsche 992 GT3 - 2018 Onwards with or without PCCB
Porsche 981 Cayman GT4 - 2015 to 2016 with or without PCCB
Porsche 718 Cayman GT4 RS with or without PCCB
Porsche 718 Cayman GT4,
Porsche 718 Boxster Spyder with or without PCCB

Girodisc caliper studs are a direct replacement for the OEM caliper bolts.

A must-have item for those who track or race their cars often. The factory bolts will quickly strip out the threads in the expensive wheel uprights, from removing the calipers for maintenance. These Cup-style caliper studs will eliminate this problem and quickly pay for themselves. They also allow for quicker and easier caliper installation by guiding the calipers into position. Manufactured from aerospace quality 17-4 PH stainless steel for high strength and corrosion resistance. One kit includes 4 studs, nuts, and washers, complete for one axle. Two kits are required for the front and rear.
These Brake caliper stud kits now include the highest quality available, ARP 12-point nuts. This is a no-compromise solution. Made from high-strength stainless steel, these nuts will not corrode, have a 180,000 PSI tensile strength, and are compact in size for a better fit in the brake caliper bore.

Please Note
If you are not familiar with, or confident that you understand how to replace the caliper bolts with studs please have a certified mechanic perform the installation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BCS-02

您正在查看的产品与这些编号存在交叉引用关系

Brake caliper mounting stud kit GiroDisc
One kit per axle



Fits: - Rear

Porsche 981 Cayman GT4 - 2015 to 2015 with or without PCCB 
Porsche 718 Cayman GT4 - 2017 Onwards with or without PCCB
Porsche 718 Boxster Spyder - 2017 Onwards with or without PCCB
Porsche 718 Cayman GT4 RS with or without PCCB
Porsche 991.1 GT3 / GT3 RS - 2012 to 2018 without PCCB
Porsche 991 GT3 / GT3RS / GT2RS - 2012 to 2018 with PCCB 
Porsche 992 911 GT3 - 2019 Onwards with or without PCCB

Girodisc caliper studs are a direct replacement for the OEM caliper bolts.

A must-have item for those who track or race their cars often. The factory bolts will quickly strip out the threads in the expensive wheel uprights, from removing the calipers for maintenance. These Cup-style caliper studs will eliminate this problem and quickly pay for themselves. They also allow for quicker and easier caliper installation by guiding the calipers into position. Manufactured from aerospace quality 17-4 PH stainless steel for high strength and corrosion resistance. One kit includes 4 studs, nuts, and washers, complete for one axle. Two kits are required for the front and rear.
These Brake caliper stud kits now include the highest quality available, ARP 12-point nuts. This is a no-compromise solution. Made from high-strength stainless steel, these nuts will not corrode, have a 180,000 PSI tensile strength, and are compact in size for a better fit in the brake caliper bore.

Please Note
If you are not familiar with, or confident that you understand how to replace the caliper bolts with studs please have a certified mechanic perform the installation.

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

BCS-08

您正在查看的产品与这些编号存在交叉引用关系

驱动销制动盘。
单独出售 - 每张光盘需 5 张



适合：
配备中央锁止车轮的保时捷 991 GT3 Cup
带中央锁止车轮的保时捷 992 Cup

描述

中心锁轮驱动销

这些销钉会随着时间的推移而磨损，并在更换车轮时损坏，从而导致车轮移动幅度超过预期。

与保时捷零件编号 991.341.705.8A 和 9F1401111 类似

相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号，供比较之用。

9F1401111

您正在查看的产品与这些编号存在交叉引用关系