Gearshift Control Parts

Nylon linkage friction ring ball. (Not for G50 Gearbox cars).



This nylon gear linkage friction ring can get worn out and could need replacing. fits at the end of the gearshift lever.

Fits:
Porsche 911 1970-86
Porsche 914 1970-76
Porsche 930 Turbo
(Not for G50 Gearbox cars)

Click 'Zoom in' for large parts diagram.
Diagram Ref No.56

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91442422400

The product you are viewing cross references to these numbers

Nylon linkage friction ring ball. (Not for G50 Gearbox cars).



This nylon gear linkage friction ring can get worn out and could need replacing. fits at the end of the gearshift lever.

Fits:
Porsche 911 1970-86
Porsche 914 1970-76
Porsche 930 Turbo
(Not for G50 Gearbox cars)

Click 'Zoom in' for large parts diagram.
Diagram Ref No.56

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91442422400

The product you are viewing cross references to these numbers

Rennline 915 gear shift coupling bushings solid. 



Fits:
Porsche 356A / 356B / 356C - 1956 to 1965
Porsche 911 1969 to 1988
Porsche 911 turbo - 1975 to 1988

Product Description

If your 915 shift coupler has never been service or replaced and you're experiencing a loose and worn-out feel in your shifter, the culprit is likely the coupler. 

The factory-installed coupler bushings are constructed from low durometer compliant rubber, which tends to wear out quickly. Our upgraded brass bushing is designed to enhance shifter feedback and deliver precise shifts. It's the solution you've been seeking to optimize the performance of your 915 transmission.

Fits factory shift coupling - 91142402404 and 69542402404

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR18

The product you are viewing cross references to these numbers

Rennline billet shift rod carrier and bushing. 



Fits:
Porsche 911 - 1965 to 1986
Porsche 911 turbo - 1975 to 1988
Porsche 914 (with tail-shift)

Porsche 914/6 - 1970 to 1972

Product Description

If you need help remembering the last time you changed this bushing, chances are it's time. Upgrade your shift bushing carrier while you’re at it, featuring a high-density Delrin bush.

Bracket -

• Stronger over the sheet metal OE one reducing flex and play.
• Tighter tolerance on the bushings to reduce play.
• Works with OE and aftermarket bushings
• Comes with TR16 upgraded bushing preinstalled.
• Easier to install bushings.
• Replaces factory part 93042403101 and 91442422400

Bushings -

• Delrin material for a more direct feeling.
• Extended bushing for more lateral control.
• Works on OE shifter support
• Easy to install
• Lubrication recommended

Click 'Zoom in' for large parts diagram
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR17

The product you are viewing cross references to these numbers

RennShift Performance Aluminium Shifter for 901/915 and 914 tail-shift transmissions. Knob not included. Also known as the RennSport Precision Shifter or RennSport Shifter or simply the RennShifter.

• Adjustable Throw, Adjustable Spring Gates, Bronze Bushings and much more!
• Fits 911 up to '86 with 901/911/915 transmissions.
• Fits 914 '70-'72 with tail-shift transmission including 914/6.
• Complete shifter makes installation simple.
• 20% and 33% throw reduction can be changed at any time.
• Works with factory shift knob or our optional shift knobs.
• Automatic and manual reverse lock-pawls included.
• Includes small RS boot. Can be used with original factory 915 boot.


Please Note: Shift knobs and the factory boot shown in pictures are optional extras.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSOR

The product you are viewing cross references to these numbers

RennShift Performance Black Shifter for 901/915 and 914 tail-shift transmissions. Knob not included. Also known as the RennSport Precision Shifter or RennSport Shifter or simply the RennShifter.

• Adjustable Throw, Adjustable Spring Gates, Bronze Bushings and much more!
• Fits 911 up to '86 with 901/911/915 transmissions.
• Fits 914 '70-'72 with tail-shift transmission including 914/6.
• Complete shifter makes installation simple.
• 20% and 33% throw reduction can be changed at any time.
• Works with factory shift knob or our optional shift knobs.
• Automatic and manual reverse lock-pawls included.
• Includes small RS boot. Can be used with original factory 915 boot.


Please Note: Shift knobs and the factory boot shown in pictures are optional extras.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

RSOR

The product you are viewing cross references to these numbers

Sealing Sleeve.



Fits:
Porsche 911 1972-73 (Sportomatic Only)
Porsche 911 1974-86 (Not for G50 Gearbox cars)
Porsche 930 Turbo 1975-89

Diagram Ref No. 32

Sealing Sleeve.



Fits:
Porsche 911 1972-86 (Not for G50 Gearbox cars)
Porsche 930 Turbo 1975-88

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 33

Boot for coupler shift linkage in transmission tunnel, Outer.



Fits:
Porsche 911 1972-86 (Not for G50 Gearbox cars)
Porsche 930 Turbo 1975-88

Click 'Zoom in' for large parts diagram.
Diagram Ref No. 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142429400

The product you are viewing cross references to these numbers

Sealing Sleeve.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 20.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042429406

The product you are viewing cross references to these numbers

Shift Boot Sleeve. Inner.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 21.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042407500

The product you are viewing cross references to these numbers

Shift coupler bushing, Black, 2 required.



Fits:
Porsche 356B T5 (from Trans#35001)
Porsche 356C
Porsche 911/912 up to 1986

Click 'Zoom in' for large parts diagram.
Fits to no 29 on diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

69542422300

The product you are viewing cross references to these numbers

Shift coupler bushing, 2 required.



Fits:
Porsche 356B T5 (from Trans#35001)
Porsche 356C
Porsche 911 / 912 up to 1986

Click 'Zoom in' for large parts diagram.
Fits to no 29 on diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

69542422300

The product you are viewing cross references to these numbers

Shift coupler clamp. An original design machined aluminium 911 coupler clamp allows one-handed tightening of the coupler.

For 901/911/915 911s up to 1986. Replaced the bent, distorted original.

Two wrenches are required to tighten the original clamp, requiring a third hand to move the shifter. 
Make this step much easier - with our clamp you can have one hand on the shift stick and the other on the wrench to tighten the coupler. 
Does not fit 914.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

JWST-CPLR-CLMP

The product you are viewing cross references to these numbers

Shift Lever Bearing O-Ring.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 8.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970101250

The product you are viewing cross references to these numbers

Shift Lever Bearing O-Ring.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 8.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99970192340

The product you are viewing cross references to these numbers

Shift lever bearing



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 3.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042412401

The product you are viewing cross references to these numbers

Shift lever buffer plate.



Fits:
Porsche 911 1973-1986

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142414700

The product you are viewing cross references to these numbers

Shift lever buffer plate.



Fits:
Porsche 911 1973-1986

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142414700

The product you are viewing cross references to these numbers

Shift lever for shift rod.



Fits:
Porsche 911 (1970 to 1977)
Porsche 911 SC (1978 to 1983)
Porsche 911 Carrera (1984 to 1986)

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91530313300

The product you are viewing cross references to these numbers

Shift Linkage Boot Inner.



Fits:
Porsche 356 1960-65
Porsche 911/912 1965-75 Sportomatic Transmission Cars
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91442490100

The product you are viewing cross references to these numbers

Shift linkage boot inner.



Fits:
Porsche 911/912 1965-73
Manual Transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142429202

The product you are viewing cross references to these numbers

Shift linkage boot inner.



Fits:
Porsche 911/912 1965-73
Manual Transmission

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142429202

The product you are viewing cross references to these numbers

Shift Rod Bushing.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042422403

The product you are viewing cross references to these numbers

Shift rod coupler rubber washer.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 16A.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042422702

The product you are viewing cross references to these numbers

Shift rod coupler.



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 16.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042402803

The product you are viewing cross references to these numbers

Powerflex Shift rod coupling bush.
Replacement OEM Part Number: 96442422300.
Fits inside the Gearshift Coupling part number 91142402404



Fits:
Not for G50 Transaxle

Porsche 356B 1960-65
F >>110 406 COUPE -REUTTER-
F >>153 022 CABRIO HARDTOP
F >> 87 491 ROADSTER

Porsche 911 1970-86
Porsche 911 turbo 1977-88
Porsche 914 1973-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 25


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-430

The product you are viewing cross references to these numbers

Powerflex Black Series Shift rod coupling bush.
Replacement OEM Part Number: 96442422300.
Fits inside the Gearshift Coupling part number 91142402404



Fits:
Not for G50 Transaxle

Porsche 356B 1960-65
F >>110 406 COUPE -REUTTER-
F >>153 022 CABRIO HARDTOP
F >> 87 491 ROADSTER

Porsche 911 1970-86
Porsche 911 turbo 1977-86
Porsche 914 1973-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 25


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-430BLK

The product you are viewing cross references to these numbers

Powerflex Heritage Collection Shift rod coupling bush.
Replacement OEM Part Number: 96442422300.
Fits inside the Gearshift Coupling part number 91142402404



Fits:
Not for G50 Transaxle

Porsche 356B 1960-65
F >>110 406 COUPE -REUTTER-
F >>153 022 CABRIO HARDTOP
F >> 87 491 ROADSTER

Porsche 911 1970-86
Porsche 911 turbo 1975-88
Porsche 914 1973-76
Porsche 924 1976-79

Click 'Zoom in' for large parts diagram.
Diagram ref no 25


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-430H

The product you are viewing cross references to these numbers

Shift rod repair set, G50.



Fits:
Porsche 911 Turbo (1987 - 1989)
Porsche 911 Carrera (1987 - 1989)

Kit contents:
1x 95042412401 shift-lever bearing
1x 91142413901 ball socket
1x 99970192340 O-ring
1x 99970101250 O-ring

Click 'Zoom in' for large parts diagram.
Diagram ref no 3, 4, 8 and 10.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PCG42402004

The product you are viewing cross references to these numbers

Shift rod stop.



Fits:
Porsche 911 1965-83 Sportomatic
Porsche 914-6 1970-76 SPM

Click 'Zoom in' for large parts diagram.
Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90530321100

The product you are viewing cross references to these numbers

Shifter crush sleeve for mounting shift knob.



Fits:
Porsche 911/912 1965-86
Porsche 914-6/4 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99953200300

The product you are viewing cross references to these numbers

Short shift kit - track.



Track car short shift kit for 911 2.7/SC/3.2
915 GEARBOX from 1974- 86. REDUCED SHIFT BY 20%, complete with gearshift lever.

Please CLICK HERE for installation instructions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91142493100W

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 911 1964-72 with 901 gearbox



Fits 911 with the 901 gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-901-

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 911 1972-84 with 915 gearbox



Fits 911 with the 915 gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-915-

The product you are viewing cross references to these numbers

Short throw shifter for Porsche 930 1975-88 with 930 4 speed gearbox



Fits 911 with the 930 4 speed gearbox

Comes With:
-Numeric Racing Shifter
-Numeric Racing Maintenance Free Shift Linkage
-Porsche Replacement Shift Rod Bushing
-Porsche Replacement Shift Lever Ball Socket (Part #: 91142413900)
Everything needed to completely remove all the slop from your shifting. All motion on the shifter is directly transferred to the transmission.
Features:

OEM Fitment: A direct swap and fitment from original shifter. Nothing required but a few common use tools.
Self Centering: Dual self centering springs (pictured yellow mounts, but will be black in final product). The shifter is centered automatically in the 3-4 plane (915 transmissions) or 2-3 plane (901 transmissions) or 1-2 plane (930 transmissions). No more spaghetti-like shifting or the shifter bouncing around. Multiple spring sizes gives a variety of side to side tension options based on your preference.
Throw reduction: Throw reduction of up to 40%. Use of a longer shift knob can increase the throw so it is only reduced by 30% if 40% is too much for preference. No more rowing.
Adjustable Reverse Lockout: Does your reverse gear get skimmed even with the stock reverse lockout? Our reverse lockout is adjustable so that it is dialed in perfectly to each car.
All Stainless Steel Hardware: All hardware is stainless steel and all aluminum is anodized. Rust won't be a worry with our shifters. Also, the reverse lockout and the bottom of the shifter is hardened steel for wear resistance.
Ball Bearings on Every Moving Axis: We remove all bushings and clips that hold the stock shifter in place and bare metal to metal contact for pivot with ball bearings. This is how we are able to remove all the play from the shifter and provide precise shifts.

Shift Rod Linkage:
-The ONLY aftermarket shift linkage that is maintenance free that isn't a U-Joint. Buy and install once, it isn't fun to keep adjusting this stock linkage every time you swap the bushings.
-No wear or play that is introduced from wear because we don't use plastic bushings. Any small play in this linkage is translated directly to the shifter, so get rid of the stock.
-Directly replaces OEM shift Linkage.

Pair with our Shift Knob / Extender is recommended.

Disclaimer: The 2mm Spring option comes with yellow bushings instead of black

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

NM80-930-

The product you are viewing cross references to these numbers

Tension spring for parking lock lever assembly on shift rod.
Sold each.



Fits:
Porsche 911 1965-1980 with Sportomatic Transmission
Porsche 914-6 1970-76 SPM

Click 'Zoom in' for large parts diagram.
Diagram ref no 25

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90530323500

The product you are viewing cross references to these numbers

Threaded bolt for shift sleeve



Fits:
Porsche 911 1987-89 G50 GEARBOX CARS

Click 'Zoom in' for large parts diagram.
Diagram ref no 7.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95042418501

The product you are viewing cross references to these numbers

Throttle bell crank support rod.



Fits:
Porsche 356B / 356C 1960-65
Porsche 911 1965-89
Porsche 914-6 / 914-6:SPM 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91430130701

The product you are viewing cross references to these numbers

Transmission Plate.



Fits:
Porsche 911 1987-89 G50.00 / G50.01 / G50.02
Porsche 911 1989 G50.50

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95030313050

The product you are viewing cross references to these numbers