Retro Performance Pistons and cylinders
Refine by Car Type
Big bore biral cylinder and CP forged piston kit 86mm. Porsche 356C / 912
Code: 0081186PCP
This is a new set 86mm Porsche 356/912 CP pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with CP Forged pistons with 30° Angle.
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and wire locks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PCP
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with CP Forged pistons with 30° Angle.
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and wire locks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PCP
008 11 86P CP
0081186PCP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£2,055.95
Now £2,014.83
Orderable 
Big bore biral cylinder and JE forged piston kit "High Comp" 82.5mm. Porsche 356C / 912
Code: 0081182PJE
This is a new set 82.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182PJE
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182PJE
008 11 82P JE
0081182PJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£1,483.95
Now £1,454.27
Orderable
Big bore biral cylinder and JE forged piston kit "High Comp" 83.5mm. Porsche 356C / 912
Code: 0081183PJE
This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183PJE
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 11.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183PJE
008 11 83P JE
0081183PJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£1,432.95
Now £1,404.29
Orderable
Big Bore biral cylinder and JE forged piston kit "Low Comp" 83.5mm. Porsche 356C / 912
Code: 0081183CJE
This is a new set 83.5mm Porsche 356/912 JE High Compression pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 9.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183CJE
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This is a High Compression kit 9.5:1 more commonly used in race-cars . This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183CJE
0081183CJE
008 11 83C JE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£1,432.95
Now £1,404.29
Orderable
Big bore cylinder and JE forged piston kit 86mm. Porsche 356C / 912
Code: 0081186CJE
This is a new set 86mm Porsche 356/912 JE pistons & cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Cast Iron with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186CJE
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Cast Iron with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186CJE
008 11 86C JE
0081186CJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£1,230.95
Now £1,206.33
In stock
Big bore cylinder and JE piston kit 92mm, Hi comp. Porsche 911S 2.7L
Code: 00891192SJE
This is a new set of 92mm Big Bore Porsche 911 2.7L High compression JE pistons & cylinders. The Compression ratio is 10.5:1 with the 70.4mm crank.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 25.5
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192SJE
The product you are viewing cross references to these numbers
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 25.5
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192SJE
00891192SJE
008 911 92S JE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£2,105.95
Now £2,063.83
Orderable
Big bore cylinder and JE piston kit 92mm, Low comp. Porsche 911S 2.7L
Code: 00891192EJE
This is a new set of 92mm Porsche 911 2.7L Low compression JE pistons & cylinders. The Compression ratio is 9.5:1 with the 70.4mm crank.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 19.7
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192EJE
The product you are viewing cross references to these numbers
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 19.7
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891192EJE
008 911 92E JE
00891192EJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£2,105.95
Now £2,063.83
Orderable
Big bore piston and aluminum cylinder kit 86mm. Porsche 356C / 912
Code: 0081186PB
This is a new set of Big Bore 86mm Porsche 356/912 pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are Biral with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PB
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are Biral with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PB
008 11 86PB
0081186PB
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£962.95
Now £943.69
In stock
Big bore piston and cast cylinder kit 86mm. Porsche 356C / 912
Code: 0081186PS
This is a new set of Big Bore 86mm Porsche 356/912 pistons and cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are cast iron with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PS
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece Case. The Cylinders are cast iron with Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Cast Iron.
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PS
0081186PS
008 11 86PS
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£632.95
Now £620.29
In stock
Biral cylinder and JE forged piston kit 86mm. Porsche 356C / 912
Code: 0081186PJE
This is a new set 86mm Porsche 356/912 JE pistons with Biral cylinders.
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PJE
The product you are viewing cross references to these numbers
It fits Porsche 356; C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case. The Cylinders are Biral with JE Forged pistons with 30° Angle.
JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pocket, Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better . This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 1600cc
Stroke: 74mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Cylinders, 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186PJE
008 11 86P JE
0081186PJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£1,432.95
Now £1,404.29
Orderable
Biral cylinders and CP piston kit 86mm. Porsche 911 2.2L/2.4L
Code: 00891186SCP
This is a new set of 86mm Porsche 911 2.2/2.4L CP Pistons with Biral cylinders.
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .450
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and wirelocks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SCP
The product you are viewing cross references to these numbers
CP Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets, CP kits come with wirelock pin clips for extreme RPM. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: CP 2618 Forged
Dome Height: .450
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and wirelocks with tool.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SCP
008 911 86S CP
00891186SCP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£2,671.95
Now £2,618.51
Orderable
Cylinder and JE forged piston kit 81mm, Hi comp. Porsche 911 2.0L
Code: 00891181SJE
This is a new set of 81mm Porsche 911 2.0L High compression JE pistons with Biral cylinders.
The Compression ratio is 9.5:1 with the 66mm crank. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.0
Stroke: 66
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .460
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891181SJE
The product you are viewing cross references to these numbers
The Compression ratio is 9.5:1 with the 66mm crank. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.0
Stroke: 66
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .460
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891181SJE
008 911 81S JE
00891181SJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
£1,917.95
Now £1,879.59
Orderable
Cylinder and JE forged piston kit 86mm, Hi comp. Porsche 911 2.2L/2.4L
Code: 00891186SJE
This is a new set of 86mm Porsche 911 2.2/2.4L High compression JE Pistons with Biral cylinders.
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .450
Compression: 10.5:1/11.2:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SJE
The product you are viewing cross references to these numbers
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .450
Compression: 10.5:1/11.2:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186SJE
008 911 86S JE
00891186SJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£2,035.00
Now £1,994.30
Orderable
Cylinder and JE forged piston kit 86mm, Low comp. Porsche 911 2.2L/2.4L
Code: 00891186EJE
This is a new set of 86mm Porsche 911 2.2/2.4L low compression JE Pistons with Biral cylinders.
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .300
Compression: 9.2:1/9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186EJE
The product you are viewing cross references to these numbers
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm. JE Forgings are made from 2618 Aluminium, They have a 0 offset with extra material under the top for the valve pockets. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: JE 2618 Forged
Dome Height: .300
Compression: 9.2:1/9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186EJE
008 911 86E JE
00891186EJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£1,917.95
Now £1,879.59
Orderable
Cylinder and JE piston kit 90mm, Hi comp. Porsche 911S 2.7L
Code: 00891190SJE
This is a new set of 90mm Porsche 911 2.7L High compression JE pistons & cylinders. The Compression ratio is 10.5:1 with the 70.4mm crank.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 27.3
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190SJE
The product you are viewing cross references to these numbers
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 27.3
Compression: 10.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190SJE
008 911 90S JE
0008 911 90S JE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£2,105.95
Now £2,063.83
Orderable
Cylinder and JE piston kit 90mm, Low comp. Porsche 911S 2.7L
Code: 00891190EJE
This is a new set of 90mm Porsche 911 2.7L Low compression JE pistons & cylinders. The Compression ratio is 9.5:1 with the 70.4mm crank.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 21.8
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190EJE
The product you are viewing cross references to these numbers
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets. The Cast Iron Liners come with out the head gasket grove.
Engine size: 2.7
Stroke: 70.4
Cylinders: Cast Iron
Pistons: JE 2618 Forged
Dome CC: 21.8
Compression: 9.5:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891190EJE
008 911 90E JE
00891190EJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
£2,105.95
Now £2,063.83
Orderable
Cylinder kit, Big bore VW 86mm. Porsche 356/912
Code: 0081186SL
This is a new set of 86mm Big Bore Porsche 356 or 912 Cast Iron Liners. This kit requires no machine work.
Fits:
Porsche 356
Porsche 912
Cylinders: Cast Iron.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SL
The product you are viewing cross references to these numbers
Fits:
Porsche 356
Porsche 912
Cylinders: Cast Iron.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SL
008 11 86SL
0081186SL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£355.95
Now £348.83
In stock
Cylinder kit, Biral big bore VW 83.5mm. Porsche 356/912
Code: 0081183BL
This is a new set of 83.5mm Big Bore Porsche 356 or 912 Biral Liners. This kit requires no machine work.
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183BL
The product you are viewing cross references to these numbers
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081183BL
008 11 83BL
0081183BL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£481.95
Now £472.31
Orderable
Cylinder kit, Biral big bore VW 86mm. Porsche 356/912
Code: 0081186BL
This is a new set of 86mm Big Bore Porsche 356 or 912 Biral Liners. Biral Liners are a cast iron sleeve with aluminium fins, making them lighter and dissipate heat better. This kit requires no machine work.
Fits:
Porsche 356
Porsche 912
Cylinders: Biral.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186BL
The product you are viewing cross references to these numbers
Fits:
Porsche 356
Porsche 912
Cylinders: Biral.
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186BL
008 11 86BL
0081186BL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£615.95
Now £603.63
Orderable
Cylinder kit, Biral VW 82.5mm. Porsche 356/912
Code: 0081182BL
This is a new set of 82.5mm Porsche 356 or 912 Biral Liners. This kit requires no machine work.
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182BL
The product you are viewing cross references to these numbers
Fits:
Porsche 356
Porsche 912
Cylinders: Biral
Kit included: 4 Cylinders
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081182BL
0081182BL
008 11 82BL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
£508.95
Now £498.77
Orderable
Cylinder kit, Biral. Porsche 911 2.0
Code: 0089118
This is a set of (6) Big Bore Biral cylinders for the 2.0 Liter 911 engine.
Fits:
Porsche 911 2.0L
Cylinders: Biral.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
Fits:
Porsche 911 2.0L
Cylinders: Biral.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
008 911 81BL
00891181BL
008 911 82BL
00891182BL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Prices from: £598.73
Cylinder kit, Biral. Porsche 911 2.2 / 2.4
Code: 0089118
This is a set of (6) Biral Cylinder for the 2.2 & 2.4 Liter 911 engine
Fits:
Porsche 911 2.2L / 2.4L
Cylinders: Biral
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
Fits:
Porsche 911 2.2L / 2.4L
Cylinders: Biral
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
008 911 84BL
00891184BL
008 911 86BL
00891186BL
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Prices from: £684.97
Cylinder kit, Cast iron. Porsche 911 2.7
Code: 0089119
This is a set of (6) Cast iron Cylinder for the 2.7 Liter 911 engine. The Cast Iron Liners come without the head gasket grove.
Fits:
Porsche 911 2.7L
Cylinders: Cast Iron
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089119
The product you are viewing cross references to these numbers
Fits:
Porsche 911 2.7L
Cylinders: Cast Iron
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089119
008 911 90L
00891190L
008 911 92L
00891192L
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Prices from: £406.65
Piston and cylinder kit 84mm, Hi comp. Porsche 911 2.2/2.4L
Code: 00891184S
This is a new set of 84mm Porsche 911 2.2/2.4L High compression pistons with Biral cylinders. The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.1:1/9.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184S
The product you are viewing cross references to these numbers
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.1:1/9.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184S
008 911 84S
008 911 84S
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£1,198.95
Now £1,174.97
Orderable
Piston and cylinder kit 84mm, Low comp. Porsche 911 2.2/2.4L
Code: 00891184E
This is a new set of 84mm Porsche 911 2.2/2.4L low compression Pistons with Biral cylinders. The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 8.5:1/9.1:1
Kit includes 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184E
The product you are viewing cross references to these numbers
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 8.5:1/9.1:1
Kit includes 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891184E
00891184E
008 911 84E
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£1,201.95
Now £1,177.91
Orderable
Piston and cylinder kit 86mm, Hi comp. Porsche 911 2.2/2.4L
Code: 00891186S
This is a new set of 86mm Porsche 911 2.2/2.4L High compression pistons with Biral cylinders. The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186S
The product you are viewing cross references to these numbers
The Cylinders are Biral with Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin. Biral Liners are a cast iron sleeve with aluminum fins, making them lighter and dissipate heat better. This kit requires no machine work, when installing in factory Porsche case & heads.
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Cylinders: Biral.
Pistons: Hypereutectic
Dome Height:
Compression: 9.5:1/10.7:1
Kit includes: 6 Cylinders, 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
00891186S
00891186S
008 911 86S
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£1,201.95
Now £1,177.91
Orderable
Piston set, big bore 86mm. Porsche 356C / 912
Code: 0081186SP
This is a new set of Big Bore 86mm Porsche 356/912 pistons.
Fits: Porsche 356C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece Case.
Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin.
Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SP
The product you are viewing cross references to these numbers
Fits: Porsche 356C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece Case.
Graphite Coated Hypereutectic pistons with the 30° Angle, valve pockets, and the 22mm Pin.
Engine size: 1600cc
Stroke: 74mm
Pistons: Hypereutectic
Dome CC: 17
Compression: 9.2:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186SP
008 11 86SP
0081186SP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£350.95
Now £343.93
In stock
Piston set, big bore JE forged piston set "High Comp". Porsche 356C / 912
Code: 008118
This is a new set Porsche 356/912 JE High Compression pistons.
Fits: Porsche 356 C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece case.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket and the 30° Angle. This is a High Compression Piston kit 11.5:1 more commonly used in race-cars .
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
008118
The product you are viewing cross references to these numbers
Fits: Porsche 356 C / SC 1963-66 & Porsche 912 1965 and Up with the 3 piece case.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket and the 30° Angle. This is a High Compression Piston kit 11.5:1 more commonly used in race-cars .
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .295
Compression: 11.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
008118
008 11 82JEP
0081182JEP
008 11 83JEP
0081183JEP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
Prices from: £763.37
Piston set, Cast. Porsche 911S 2.2/2.4
Code: 0089118
This is a new set of 6 cast pistons. Graphite Coated Hypereutectic pistons with valve pockets, and the 22mm Pin.
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: Hypereutectic
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - Low compression
The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.
2. 84mm - High compression
The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: Hypereutectic
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - Low compression
The Compression ratios are 8.5:1 with the 66mm crank and 9.1:1 with the 70.4mm.
2. 84mm - High compression
The Compression ratios are 9.1:1 with the 66mm crank and 9.7:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 9.5:1 with the 66mm crank and 10.7:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
008 911 86P
008 911 84SP
008 911 84EP
00891186P
00891184SP
00891184EP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Prices from: £505.63
Piston set, JE Forged 86mm. Porsche 356 C /912
Code: 0081186JEP
This is a new set 86mm Porsche 356/912 JE pistons.
Fits: Porsche 356C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case.
JE Forged pistons with 30° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186JEP
The product you are viewing cross references to these numbers
Fits: Porsche 356C, SC, 1963-66 & Porsche 912; 1965 and Up with the 3 piece case.
JE Forged pistons with 30° Angle. JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pocket
Engine size: 1600cc
Stroke: 74mm
Pistons: JE 2618 Forged
Dome Height: .155
Compression: 9.5:1
Piston Angle: 30°
Kit includes: 4 Pistons, A set of Piston Rings, and 4 wrist pins and clips.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0081186JEP
008 11 86JEP
0081186JEP
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 356C 1963-65
£778.95
Now £763.37
Orderable
Piston set, JE Forged. Porsche 911S 2.2/2.4
Code: 0089118
This is a new set of 6 JE Pistons.
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets.
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: JE 2618 Forged
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - High compression
The Compression ratios are 10.1:1 with the 66mm crank and 10.6:1 with the 70.4mm.
2. 86mm - Low compression
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
The product you are viewing cross references to these numbers
JE Forgings are made from 2618 Aluminum, They have a 0 offset with extra material under the top for the valve pockets.
Fits: Porsche 911S 2.2L / 2.4L
Engine size: 2.2/2.4L
Stroke: 66/70.4mm
Pistons: JE 2618 Forged
Kit includes: 6 Pistons, A set of Piston Rings, and 6 wrist pins and clips.
OPTIONS:
1. 84mm - High compression
The Compression ratios are 10.1:1 with the 66mm crank and 10.6:1 with the 70.4mm.
2. 86mm - Low compression
The Compression ratios are 9.2:1 with the 66mm crank and 9.5:1 with the 70.4mm.
3. 86mm - High compression
The Compression ratios are 10.5:1 with the 66mm crank and 11.2:1 with the 70.4mm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
0089118
008 911 84P JE
008 911 86EP JE
008 911 86SP JE
00891184PJE
00891186EPJE
00891186SPJE
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Prices from: £1,138.71
DISPLAYING 1 to 31 (of 31 products)
You may also like
-
Engine Modifications & Upgrades
-
Electronic Fuel Injection Throttle Kits
-
IRIDIUM POWER Spark Plugs
-
IRIDIUM RACING Spark Plugs
-
Hi Flow Air Filters
-
Air Induction Kits
-
Short GearShift Kits
-
Inter Coolers
-
Turbo Chargers
-
Performance Plenum
-
ECU Reader / Fault Finder
-
Exhaust Packages
-
Fuel Additives
-
Pedals / Floor Boards / Track Mats LHD Cars
-
Pedals / Floor Boards / Track Mats RHD Cars
-
Fire Extinguisher Mounts
-
Brey-Krause Fire Extinguisher Mount
-
Tow Eye Hooks & Tie Downs
-
Alloy Block Off Plates
-
Clutches / Flywheels / Hydraulics
-
Track & Race Coolant Radiators
-
Wössner Forged Piston Kit
-
Wössner Steel Connecting Rods
-
CP Carrillo Pistons
-
CP Carrillo Connecting Rods
-
Brake Hoses Stainless Steel Goodridge
Popular Models
