Air Induction Kits

At the heart of the unique DesignTek air filter is a specially developed polyurethane foam which acts as a filtration medium, higher both higher performance and life expectancy then paper air filters. The PYRAMID VORTEX design outer surface area will absorb larger amounts of airborne dirt particles, while still allowing air to flow freely.
High flow with excellent filtration.



Fits:
Porsche 911 (63-83) 2.7L 09/73 - 06/77
Porsche 911 (63-83) 2.7 S Carrera 08/73 - 01/76
Porsche 911 (63-83) 3.0 SC 08/82 -07/83
Porsche 911 (63-83) 3.0 SC Carrera 03/74 - 10/83

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3603001209

The product you are viewing cross references to these numbers

BMC Air Filter



This Product Fits:
Porsche 911 Carrera 2.7L / 3.0L 1973-83 (K-JETRONIC)


Panel Filter Size:
- width - 178 mm
- height - 401 mm

BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

BMC Air Filter.



This Product Fits:
Porsche 911 2.7L / 3.0L / SC 1974-83

Panel Filter Size:
- width - 180mm
- height - 396mm


BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

Replacement air filter for 5611702



Fits:
Porsche 911 1965-89


Product Specifications:
Part Number: E-3671
Product Style: Oval Air Filter
Air Filter Shape: Oval
Height: 3.25 in (83 mm)
Inner Wire: No
Inside Length: 10.75 in (273 mm)
Inside Width: 4 in (102 mm)
Outside Length: 12 in (305 mm)
Outside Width: 5.25 in (133 mm)
Top Style: Open
Top Material/Finish: None
Filter Material: Cotton Gauze


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

E-3671

The product you are viewing cross references to these numbers

K&N High Performance replacement air filter.



This Product Fits:
Porsche 911 2.7L 1972-79 (Panel Filter)
Porsche 911 3.0L / SC 1974-83


K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower.

Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty.

K&N drop-in replacement filters are designed to install easily into your factory air box.

Works with Original Equipment Manufacturer Vehicle Electronics.

Environmentally Friendly, K&N Reusable Air Filters

Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33-2004

The product you are viewing cross references to these numbers

K&N Custom Air Filters for Single or Two Barrel Carburetors for Porsche 911 Sold as single unit



This Product Fits:
Porsche 911 with carbs

K&N brand air filter, part number 56-1240 which is now 56-1770-1 this is for Weber 40/46 IDA (Triple carb) as fitted to Porsche 911.

K&N Custom Air Filter kits are designed to allow the maximum performance from your carburettors, yet keep the dirt on the outside where it belongs. These assemblies come with top and base plates and the famous K&N High-Flow Washable Air Filter.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

56-1770-2

The product you are viewing cross references to these numbers

Fabspeed CUP High Performance Airbox Cover.
Replacement for air box cover 93011018400



This air box works with stock OEM air box simply remove the air box cover replace it with the Maxflow cover. Also purchase 911 K&N air filter (gives Hi performance and deep sound).

High performance cover lid works with factory airbox to increase cold air flow and improve power;

FEATURES:
• Fits: all Porsche 911 Carrera 2.7L / 3.0L vehicles (1974-1983)
• Constructed from Carbon Fiber reinforced plastic with stainless steel quick release clips.
• Includes two large openings of 5.4" x 5.4" for maximum airflow.
• Rain-resistant design
• Simple and easy 5 minute DIY installation
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty.

*Air Filter Not Included

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR911ABX30

The product you are viewing cross references to these numbers

Pop off air valve.



Fits:
Porsche 911 1973-89

Prevents costly airbox explosions, installed with the engine and air box in place. 911 engines since 1973 have had the bad habit of backfiring and blowing a hole an the air box. 911 POP VALVE is installed inside the air box and when a backfire occurs the valve will instantly open and release the backfire pressure. The POP VALVE then automatically closes and the angine continues to run. The POP VALVE has no effect on the performance or fuel mileage.

CIS Pop Off Valve Installation Click Here

For Fitting Instructions CLICK HERE

Please note the glue is not included with the air valve.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911901522

The product you are viewing cross references to these numbers