Anti Roll Bar Bushes

Powerflex Black Series Stabilizer Bar Bush Rear.
Sold as a pack of 4 bushes

Replacement for Porsche parts No. 90133379304.



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16BLK

The product you are viewing cross references to these numbers

Powerflex Anti Roll Bar Bush Rear.
Replacement for Porsche parts No. 90133379304.

SET OF 4



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.

NOTE: Please check anti roll bar diameter before ordering.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16

The product you are viewing cross references to these numbers

Powerflex Heritage Anti Roll Bar Bush Rear.
Replacement for Porsche parts No. 90133379304.

SET OF 4



Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.

Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)

Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.


Powerflex Heritage Collection. For Modern Day Classics.

A range of bushes engineered for the road to compliment your classic car.

POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-16H

The product you are viewing cross references to these numbers

SuperPro Polyurethane Suspension Bush Kit.



Fits:
Porsche 911 1965-73

This kit includes
1 X SPF0893K Gear Linkage Bush Kit 2 Bushes, SuperPro Grease
1 X SPF1436K Front Strut Mount Bush Kit 2 Bushes, 2 Steel Tubes, SuperPro Grease
1 X SPF0526K Front Sway Bar link Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1450-18K Front Sway Bar To Cross Member Mount Kit 2 Bushes, SuperPro Grease
1 X SPF0236AK Front Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF1375K Rear Engine Mounting Bush Kit 8 Bushes, 4 Steel Tubes, SuperPro Grease
1 X SPF0095-22K Rear Sway Bar Bottom Link Bush Kit 2 Bushes, SuperPro Grease
1 X SPF0134-22K Rear Sway Bar To Chassis Bush 2 Bushes, SuperPro Grease
1 X SPF0236K Torsion Bar Pivot Bush Kit 4 Bushes, SuperPro Grease
1 X SPF0988K Rear Trailing (Banana) Arm Front Bush Kit 4 Bushes, SuperPro Grease


Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components.

Powerflex Anto Roll Bar Bush Rear.

SET OF 4



Rear stabilizer bar bush - 15mm.
Rear drop link bush - 15mm.
Fits - left and right side.

Fits:
Porsche 911 1965-1973 Rear
Porsche 914 1970-1976 Rear

Note: Please check anti roll bar diameter before ordering.

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.


Powerflex. Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFR57-412-15

The product you are viewing cross references to these numbers

Stabilizer bar bush Rear - 15mm.
Drop link bush Rear - 15mm.
Fits - left and right side. Sold each.



Fits:
Porsche 911 1965-73 Rear

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133379303

The product you are viewing cross references to these numbers

Stabilizer bar bush rear - 15mm.
Drop link bush rear - 15mm.
Fits - left and right side. Sold each.



Fits:
Porsche 911 1965-73 Rear

Click 'Zoom in' for large parts diagram.
Diagram ref no 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133379303

The product you are viewing cross references to these numbers

Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side. Sold each.



Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)

Porsche 914 Rear 2 required per car
(Stabiliser bar)

Click 'Zoom in' for large parts diagram.
Diagram Ref No 2.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133379304

The product you are viewing cross references to these numbers

PowerFlex Stabilizer Bar Bush D-Shape (W32mm x L35mm)
SET OF 2.

Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:

- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components

Fits:
Porsche 911 1965-98
Porsche 924 1977-88
Porsche 944 1982-91
Porsche 968 1992-95
Porsche 928 1978-95
Porsche 356 1950-65
Porsche 914 1970-76

Click 'Zoom in' for large parts diagram.
Diagram ref no 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PFF57-209-

The product you are viewing cross references to these numbers

Thru-body front swaybar reinforcement kit.
Sold per pair, 1 pair req'd per car.



Fits:
Porsche 911/912/930 1965-89


Prevent or repair common failure point.
Elephant Racing Swaybar Mount Reinforcement Panels will help prevent or repair the common problem of cracked swaybar mounts resulting from the application of overly stiff, binding, or incorrectly adjusted aftermarket swaybars.

Elephant Racing Swaybar Mount Reinforcement Panels are precision laser-cut from18 gauge steel. They distribute the swaybar loads into the bulkhead and double-layer sheet metal just beyond the original single-layer hole location.

You may also be interested in an upgrade to Elephant Racing's QuickChange Blade Style Swaybar which mounts to the chassis using spherical bushings that articulate or "float" ensuring no binding. Spherical bushings allow mounts to automatically re-align themselves when the chassis is flexing under load. We believe this binding plays a significant role in the mount's failure.

Installation requires welding

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270026

The product you are viewing cross references to these numbers

U-tab kit.



Fits:
Porsche 911 / 912 / 930 1969-89
Porsche 914 1970-76

Required when installing many thru-body type front sway bars onto cars originally equipped with an under-body type sway bar. U tabs are welded to stock control arms in place of the 'loop' style bushing holders used on cars originally equipped with under body type front sway bars.

• Required For Thru-Body Swaybar Conversions
• Not required for Elephant Racing Blade Type Swaybars
• Welding required for proper installation

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

2270025

The product you are viewing cross references to these numbers