Powerflex Black Series Bushes
Fits OE Wishbone Front (A-Frame) part numbers 91134190100 / 91134190200.
SET OF 4 BUSHES
Fits:
Does not fit models made before 1969, fits all models 1969 to 1989.
Porsche 911 1969-89
Porsche 912
Porsche 914 1970-76
Fits to No. 14 on the diagram
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-401BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pack of 4 bushes
Replacement for Porsche parts No. 90133379304.
Rear stabilizer bar bush - 16mm.
Rear drop link bush - 16mm.
Fits - left and right side.
Fits:
Porsche 911 1965-68 L / T / TU Rear 4 required per car
(Stabiliser bar and Drop link)
Porsche 914 1970-76 Rear 2 required per car
(Stabiliser bar)
Diagram Ref No 2.
Click 'Zoom in' for large parts diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-412-16BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-13BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-14BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-15BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair
OEM Part Number: 90134379202
Fits:
Porsche 911S 1965-67
Porsche 911S 1968 USA
Porsche 911S 1969
Porsche 911S / Carrera 2.7L / 911T/E / 911T-K 1970-73
Porsche 914 1970-76
Note: Please check bar diameter before ordering.
Click 'Zoom in' for large parts diagram.
Diagram Ref No 4.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1403-16BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
SET OF 4. Complete with metal inserts
Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram Ref No. 34 and 35
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-402BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Sold as a pair (both strut tops)
Fits onto part number: 91134101800
Fits:
Porsche 911 1965-1989
Porsche 914 1970-1976
Click 'Zoom in' for large parts diagram.
Fits to No 9 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-406BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pair (both arms)
Fits:
Porsche 911/911S 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1402BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Sold as a pair (both rear shock absorbers)
OEM Part Number: 91133352100
Fits:
Porsche 911 1965-89
Porsche 912 1965-69
Porsche 356 1950-65
Click 'Zoom in' for large parts diagram.
Diagram ref no 41
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-413BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 356 1950-55
- Porsche 356A 1955-59
- Porsche 356B 1959-63
- Porsche 356C 1963-65
SET OF 4
Fits:
Porsche 911 1965-67
Fits to No. 16 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-411BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Fits to spring plate OEM part number 90133300309
/ 90133300301.
SET OF 4
Fits:
Porsche 911 Classic (1968 - 1969)
Porsche 911 Classic (1969 - 1973)
Porsche 911 Classic (1974-1977)
Porsche 911 Classic (1974-1977) Turbo
Porsche 911 Classic (1977 - 1986)
Porsche 911 Classic (1978 - 1989) Turbo
Porsche 911 Classic (1987 - 1989)
Fits to No. 16 on the diagram.
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsitive steering
- Longer service life of suspension components.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFR57-409BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Sold as a pair (both arms)
OEM Part Number: 91434142200, 91434142201
Fits:
Porsche 911/911S 1965-1967
Porsche 912 1965-1967
Click 'Zoom in' for large parts diagram.
Diagram ref no 10
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber suspension bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-1401BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
- Anti Roll Bar
- Anti Roll Bar Bushes
- Anti Roll Bar Bracket
- Ball Joints
- Drop Links & Bushes FRONT
- Drop Links & Bushes REAR
- Shock Absorbers FRONT
- Shock Absorber Parts FRONT
- Shock Absorbers REAR
- Shock Absorber Parts REAR
- Track Control Arms FRONT
- Track Control Arm REAR
- Wheel Bearings & Kits
- Wishbones & bushes
- Torsion Bar
- Spring Plate
- Rear Trailing Arm
- Cross Member & Parts
- Wheel Hub / Carrier
- SuperPro Polyurethane Bushes
- Powerflex Heritage Collection
- Powerflex Polyurethane Bushes