Oil Radiators / Heat Exchangers
Filter by brand
Chamfered tank dual-pass oil cooler RSR Style. Porsche 911/930
Code: 8201
Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8201
The product you are viewing cross references to these numbers
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Dual pass for increased oil cooling
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8201
8201
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£560.00
Now £548.80
Arriving soon 
Chamfered tank single-pass oil cooler RSR Style. Porsche 911/930
Code: 8202
Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8202
The product you are viewing cross references to these numbers
Custom end tanks with a 45° chamfer
M22 x 1.5 connections - 22" L x 4.75" H x 2.25" W
Fits
911/930 models up to 1989
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units
These new oil coolers have custom end tanks with a 45° chamfered front angle, allowing them to fit flush inside '73-style RS/RSR bumpers. The fittings are pointed straight back. For best airflow and highest performance, CSF recommends cutting the front tub to allow for proper air flow, exiting behind the oil cooler and underneath the vehicle. Cutting the front tub will also give clearance to allow adding a rear fan shroud to pull more air through the cooler at slower speeds or while idling
Product Features:
•High Efficiency & Rugged Durability Bar/Plate Design
• M22 x 1.5 Inlet/Outlet Connections
• "Aero-Flow" Bar Design for Lightweight, Strength, and Maximum Flow
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Satin Black Finish for Extreme Protection Against Corrosion and Debris
• Pressure Tested at 120psi
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8202
8202
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£560.00
Now £548.80
Orderable
Cover plate for oil cooler, RIGHT, incl gaskets. Porsche 911 2,0S / 2,2S 1969-71
Code: 90110708500/1
Cover plate for oil cooler, RIGHT, incl gaskets.
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110708500
The product you are viewing cross references to these numbers
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110708500
91110708500
91110719100
90110719200
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£523.48
Now £507.78
Orderable
Cover plate for oil cooler, RIGHT. Porsche 911 2,0S / 2,2S 1969-71
Code: 90110708500
Cover plate for oil cooler, RIGHT
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110708500
The product you are viewing cross references to these numbers
Fits:
Porsche 911S 2.0 1969-71
Porsche 911S 2.2 1969-71
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110708500
91110708500
91110719100
90110719200
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price: £189.10
Orderable
Oil cooler distance bushing. Porsche 912
Code: 6161075420Y
Oil cooler distance bushing.
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6161075420Y
The product you are viewing cross references to these numbers
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6161075420Y
61610754200
6161075420Y
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
Price: £6.77
In stock
Oil cooler distance bushing. Porsche 912
Code: 6161075420Y/1
Oil cooler distance bushing.
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6161075420Y
The product you are viewing cross references to these numbers
Fits:
Porsche 912 1965-69
Click 'Zoom in' for large parts diagram.
Diagram ref no 11
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
6161075420Y
61610754200
6161075420Y
011655
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
£3.00
Now £2.91
In stock
Oil cooler tester for Porsche 911
Code: SR009
Oil cooler tester for Porsche 911
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
The product you are viewing cross references to these numbers
No more guessing, wondering, or hoping about your 911 engine mounted oil coolers. SR009, precisely fabricated from 6061 aluminum, allows you to easily, quickly, and simply test your cooler for leaks. This tool is a must to pressure test all coolers (1965-1989) before re-installation. This high-quality tool is anodized for years of service and includes a liquid filled gauge, Schrader valve, seals and hardware. Order one now to avoid the mess of a leaky cooler and the headache of replacing a cooler on an otherwise fine engine.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
SR009
90110704103
91110704102
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£148.96
Now £145.98
In stock
Radiator engine oil cooler front "Snake Type". Porsche 911 1970-73
Code: 91110704700
Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704700
The product you are viewing cross references to these numbers
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704700
91110704700
91110704600
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price: £532.10
Orderable
Radiator engine oil cooler front "Snake Type". Porsche 911 1970-73
Code: 91110704700/1
Radiator engine oil cooler front "Snake Type".
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704700
The product you are viewing cross references to these numbers
Radiator fits in the front under the wing.
Fits:
Porsche 911 2.7 08/73-07/74
Porsche 911 2.7 RS 08/72-07/73
Click 'Zoom in' for large parts diagram.
Diagram ref no 22
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91110704700
PS9395
1613500400
91110704700
91110704600
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£192.00
Now £186.24
In stock
Radiator engine oil cooler. Porsche 911 1965-71
Code: 90110704103
Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110704103
The product you are viewing cross references to these numbers
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110704103
90110704103
90110704102
90110704150
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Price: £1,017.59
Orderable
Radiator engine oil cooler. Porsche 911 1965-71
Code: 90110704103/1
Radiator engine oil cooler with screw socket
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110704103
The product you are viewing cross references to these numbers
Radiator type fits in engine compartment.
Fits:
Porsche 911 1965-71
Click 'Zoom in' for large parts diagram.
Diagram ref No 8.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90110704103
90110704103
90110704102
90110704150
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
£525.00
Now £509.25
Arriving soon
Universal Dual-pass oil cooler RS Style. Porsche 911/930 (up to 1989)
Code: 8110
Universal dual-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8110
The product you are viewing cross references to these numbers
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8110
8110
91110705101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£610.00
Now £597.80
Orderable
Universal single-pass oil cooler RSR Style. Porsche 911/930 (up to 1989)
Code: 8111
Universal single-pass oil cooler with direct fitment for Porsche 911 center front oil cooler (RS Style).
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features:
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8111
The product you are viewing cross references to these numbers
M22 x 1.5 connections - 24'L X 5.75'H X 2.16'W
RS style bar and plate oil coolers for air-cooled Porsche 911/930 models (up to 1989). This oil cooler is a direct-fit performance replacement for the original Porsche items but they can also be used as heavy duty universal units!
Product Features:
• Heavy duty bar/plate core
• New Aero-flow bar design for low mass, strength and maximum airflow through the core
• Satin Black finish for protection against corrosion and debris
• Triangular flush mounting bolts on both top & bottom (M8x1.25)
• Slight 15 degree angle for connections (M22x1.5 female) with tapered, cast end-tanks
• 609mm Length x 54.6mm Width x 146mm Height
Cross reference numbers
91110705101
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8111
8111
91110705101
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
£610.00
Now £597.80
Orderable
DISPLAYING 1 to 13 (of 13 products)
Also found on these pages
About Oil Radiators / Heat Exchangers
Keeping your Porsche engine cool and at the right temperature is important that’s why at Design911 we offer a comprehensive range of products for your Porsche engine every thing from water hoses, oil hoses, radiators, water pumps, oil pumps, oil coolers, thermostats, coolant and oil tanks all at our very best low prices
You may also like
Popular Models
