Exhaust Package

Fabspeed Header Muffler Kit WITH Heat Exchange



Fits : all Porsche 993 Carrera vehicles 1994-1998 - 3.6L / 3.8L and engines

Fabspeed's RSR Header Muffler Kit is a full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange. Works great on street cars too. This Header/Muffler kit is built from the ground up to optimize performance for the Porsche 993 Carrera. Beyond just improving horsepower, torque, and throttle response, this package will also reduce the overall weight of your car by 43 pounds, which improves handling and acceleration.

SOUND:

This kit is designed specifically for use on the track, but works well for street drivers who want an aggressive and track-inspired exhaust note.

POWER:

We developed every inch of it to bring out the aggressive performance that the Carrera is capable of. On our dyno we saw gains of 29whp and 25ft/lbs of tq.

FEATURES:

• Loud and aggressive cup car sound
• 1.75" / 45mm Header tubes, 26" long
• This system can be ordered with single or double outlets
• Maintain your factory in-cabin heat with the optional heat exchange on the headers
• Saves 43lbs from the rear of the vehicle with heat exchange option, and saves 47lbs without heat exchange option
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

NOTE:

This package can be purchased with a heat exchange on the headers that will help maintain the factory in-cabin heat. Without the exchange system, you'll save an additional 4 lbs, for a total of 47 pounds of weight reduction.

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR993RSRWH

The product you are viewing cross references to these numbers

Fabspeed Header Muffler Kit WITHOUT Heat Exchange.



Fits: all Porsche 993 Carrera vehicles 1994-1998 - 3.6 liter / 3.8 liter and engines

Fabspeed's RSR Header Muffler Kit is a full exhaust system developed for track use provides an aggressive exhaust note while adding horsepower, torque, and throttle response; available as single or dual outlet and with or without heat exchange. Works great on street cars too. This Header/Muffler kit is built from the ground up to optimize performance for the Porsche 993 Carrera. Beyond just improving horsepower, torque, and throttle response, this package will also reduce the overall weight of your car by 43 pounds, which improves handling and acceleration.

SOUND:

This kit is designed specifically for use on the track, but works well for street drivers who want an aggressive and track-inspired exhaust note.

POWER:

We developed every inch of it to bring out the aggressive performance that the Carrera is capable of. On our dyno we saw gains of 29whp and 25ft/lbs of tq.

FEATURES:

• Loud and aggressive cup car sound
• 1.75" / 45mm Header tubes, 26" long
• This system can be ordered with single or double outlets
• Maintain your factory in-cabin heat with the optional heat exchange on the headers
• Saves 43lbs from the rear of the vehicle with heat exchange option, and saves 47lbs without heat exchange option
• Constructed from mandrel bent T304L stainless steel
• Simple DIY bolt-on installation, no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

NOTE:

This package can be purchased with a heat exchange on the headers that will help maintain the factory in-cabin heat. Without the exchange system, you'll save an additional 4 lbs, for a total of 47 pounds of weight reduction.

PURCHASE DISCLAIMER: Fabspeed Motorsport does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Fabspeed Motorsport will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls.


Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR993RSRWOH

The product you are viewing cross references to these numbers

Fabspeed Exhaust Muffler, Headers, 200 Cell Cats Kit.



Fits:
Fits all Porsche 993 Turbo / Turbo S vehicles (1995-1998)

This package includes the Maxflo mufflers, deluxe tips, modular sports cats, headers with heat, and CUP performance intake system with BMC filter.

T304 stainless steel, C.N.C. mandrel bent tubing for maximum power and exotic sports car sound. Headers with heat contain a 3-into-1 high velocity merge collector for improved exhaust scavenging and maximum power. Maxflo muffler is constructed from 14-16 gauge, 2.5" (63.5mm) stainless steel which is very durable and lightweight.
German imported 200 cell per square inch catalytic converter cores which increase throttle response and horsepower. Modular sport cats include cat bypass section which is a quick switch utilizing V-Band clamps from a daily driver to a track oriented 993TT.
CUP air intake system works with stock OEM air box and includes high performance BMC F1 air filter. This package complies with warranty and emissions. No Check Engine Light!

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Please note: It is illegal to fit this product for road use on type-approved vehicles first used on or after 1/3/2001


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR993TSPKG

The product you are viewing cross references to these numbers