Bilstein B16 PSS9/10 Height Damping Adjustable Coilover Kit

CARGRAPHIC AirLift Evolution Upgrade Kit



The CARGRAPHIC AirLift Evolution is available as an upgrade kit to be mounted on an existing factory front coilover suspension.  Fits cars with PASM or without 

It is important to note that the CARGRAPHIC AirLift Evolution can only be fitted to coilovers with cylindrical suspension springs. Alternatively, the kit can be fitted to Bilstein, Ohlins and KW coilover suspension kits, which are available to purchase from Design911

Please note when ordering we will need your full vehicle details, together with which type of coilover kit is being used with the kit 

Consisting of:
• 2x CARGRAPHIC AirLift Air spring / Air bellows
• 1x CARGRAPHIC AirLift Control unit V9
• 1x Wiring loom
• 1x Air duct set with connections
• 1x Remote control
• Fitting material
• Installation manual
• TÜV-Certificate*
• For vehicles with coilover suspension with cylindrical suspension springs

Features:

• Raising of the body by 55mm, measured at the fender
• Fast response time: maximum increase within 15 seconds
• No change or impairment of driving behaviour
• Safe control with automatic lowering from 50km/h
• Pneumatic operation, thus no liquid in the vehicle
• No reduction of the luggage compartment volume
• Low weight of approx. 3Kg
• Short installation time of approx. 3 hours.
• Operation via radio or permanently installed switch
• German TUEV certificate*
• Tested by world champion Walter Röhrl
• Fitting:  A qualified, experienced technician will need to fit this kit needs with due skill, care and diligence.

Bilstein B16 PSS10 Coilover Suspension Kits.



Fits:
Porsche 996 C2 09/1997-08/2005
Porsche 996 C2 Targa 12/2001-08/2005

Additional Notes:
- Lowers Front: 15-35mm
- Lowers Rear: 10-30mm



Bilstein B16 PSS9/10 Hieght & 9-Way Damping Adjustable Coilover Kit.The PSS9/10 Kit is a ride height adjustable coil-over system with 9 different damping force settings. This Coliover Suspension Kit has created an entirely new level of performance suspension. Based on the monotube inverted technology, the Bilstein B16 PSS9/10 meets the highest standards. This system features threaded body ride height adjustability, and also allows for adjustable damping in both the compression and rebound cycles. Once fitted to the car these damping settings are easily changed by turning the aluminium adjuster to fine tune for your driving style. The Bilstein B16 PSS9/10 suspension kit lowers from 10-60mm and is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-135344

The product you are viewing cross references to these numbers

Bilstein B16 PSS10 Coilover Suspension Kits



Fits:
Porsche 996 C4/C4S 09/1997-08/2005

Additional Notes:
- Lowers Front: 25-35mm
- Lowers Rear: 15-20mm

Bilstein B16 PSS9/10 Hieght & 9-Way Damping
Adjustable Coilover Kit.The PSS9/10 Kit is a ride height adjustable coil-over system with 9 different damping force settings. This Coliover Suspension Kit has created an entirely new level of performance suspension. Based on the monotube inverted technology, the Bilstein B16 PSS9/10 meets the highest standards. This system features threaded body ride height adjustability, and also allows for adjustable damping in both the compression and rebound cycles. Once fitted to the car these damping settings are easily changed by turning the aluminium adjuster to fine tune for your driving style. The Bilstein B16 PSS9/10 suspension kit lowers from 10-60mm and is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-135351

The product you are viewing cross references to these numbers

Bilstein B16 PSS10 Coilover Suspension Kits

Fits:
Porsche 996 Turbo 06/2000-08/2005

Additional Notes:
- Lowers Front: 25-35mm
- Lowers Rear: 15-20mm

Bilstein B16 PSS9/10 Hieght & 9-Way Damping Adjustable Coilover Kit.The PSS9/10 Kit is a ride height adjustable coil-over system with 9 different damping force settings. This Coliover Suspension Kit has created an entirely new level of performance suspension. Based on the monotube inverted technology, the Bilstein B16 PSS9/10 meets the highest standards. This system features threaded body ride height adjustability, and also allows for adjustable damping in both the compression and rebound cycles. Once fitted to the car these damping settings are easily changed by turning the aluminium adjuster to fine tune for your driving style. The Bilstein B16 PSS9/10 suspension kit lowers from 10-60mm and is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-135368

The product you are viewing cross references to these numbers

Bilstein B16 PSS9 FRONT Shock Absorber. Porsche 996 GT3 / GT2

 

Type: Club-Sport,
Type: inkl. RS
Fitting Position: Front Axle,
Gas Pressure,
Spring-bearing Damper,
Height Adjustable,
Mechanically adjustable shock strength,
Top pin

Fits:
Porsche 996 GT3 MKI >>2002
Porsche 996 GT3 MKII 2004>>
Porsche 996 GT2 2001>>

Please Note:
Price is for each damper you will need to buy 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

26-630113

The product you are viewing cross references to these numbers

BILSTEIN - B16 PSS9
Type: Club-Sport,
Type: inkl. RS
Fitting Position: Rear Axle,
Gas Pressure,
Spring-bearing Damper,
Height Adjustable,
Mechanically adjustable shock strength,
Bottom eye,
Top pin

Fits:
Porsche 996 GT3 MKI >>2002
Porsche 996 GT3 MKII 2004>>
Porsche 996 GT2 2001>>

Please Note:
Price is for each damper you will need to buy 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

26-624648

The product you are viewing cross references to these numbers